- English
- 日本語
Measurement/Analytical Instruments
- Electronic component/Electronic device
- Hydraulic equipment/Pneumatic equipment/Water pressure equipment
- Vacuum apparatus
- Pump
- Industrial machine
- Imaging apparatus
- CAE/Analysis software/Entrusted analysis
- Research, measurements, services
- Measuring instrument/Measurement hardware/Related product/Related service
Philippines
CALABARZON (Region IV-A)
Overseas
All From 87 1 - 80 items are displayed
-
VCC-25CXP1MPS(B/W) / VCC-25CXP1RPS(Color)
- Catalogue
[CIS Pixel-shift Technology] This is a technology which increase the resolution of image sensor by shifting X and Y axes between the sensor’s pixel pitch 4 times in each direction, capturing images at each position, and synthesizing them to create a single image. With VCC-25CXP1MPS, equivalent to 100M pixels resolution can be acquired by 4 times shifting, and equivalent to 400M pixels resolution can be acquired by 16 times shifting. The camera is suitable for the applications which requires super-high resolution such as inspection, research/analysis, medical, archive, etc. For more information, please download our product catalog or contact our sales division.
Target industry: Other Medical Supplies/Biotechnology Measurement/Analytical Instruments
-
DCC-RGBD1 (ToF+RGB camera)
- Catalogue
This is a twin-lens board camera which integrates ToF camera and RGB camera. With ToF camera, not only the distance can be measured and acquired by using near-infrared light emitted from the camera, but also can acquire color YUV image. Also, because of its superb real-time performance, DCC-RGBD1 contributes to the applications of robot vision, automated driving, logistics, security, medical care, nursing care, etc. [Features] ■ToF camera development kit Provides exe control software and ROS driver package for acquiring images and controlling the camera. ■Acquires information on RGB and Depth by one camera ・Synchronizes and outputs YUV+D information by using on-board FPGA. ・Corresponds to a seamless measurement in the range of 30cm～5m at Wide Range mode.（At Super Near mode：15～70cm, At Wide mode：30cm～5m） Accuracy：Error±2mm (@15cm),Error±10mm（@5m） (Accuracy when compositing 100 images） ■Small footprint/USB3.0 interface utilized 55(W)×50(H)×35(D)mm USB3.0 UVC (Power feeding is not supported) A cable for power supply is supplied as an accessory.
Target industry: Automotive/Transport Machinery Measurement/Analytical Instruments Transportation/Logistic/Warehouse
-
[Simplified type] Motorized vertical test stand “MX Series”
- Catalogue
The MX Series is a vertical motorized test stand for tension and compression measurements. You can conduct full-scale measurements at affordable prices. The MX-1000N for up to 1000N, the MX-5000N for up to 5000N. [Features] • Maintains stable speed and direction for highly replicable measurement • Used for a wide variety of tests, such as tension, compression and peeling • Over-load detection and load control when used with a force gauge * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
-
[Higher grade model] Motorized vertical test stand “EMX-1000N”
- Catalogue
The EMX-1000N is a test stand which can be used as a simplified tension and compression tester when paired with a force gauge and various attachments. This model displays high rigidity with various setting options, ideal for a wide range of measurements. [Features] -Uniformly maintains speed and direction for highly replicable measurement -Easy option settings with a dial and monitor -Not only for tension and compression testing, but also suitable for peeling or friction coefficient measurement -High-end model in motorized vertical test stands Travel distance can be controlled with details like “Stop after X mm” Up to 5 sets of conditions can be stored for efficient measurement -Highly precise measurement with exceptionally rigid shaft Precision measurement with minimum deflection Accurate load-displacement measurement -Applicable to a wide speed range, various measurements can be done with just a standard model A wide speed range of 0.5 – 600 mm / min * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
-
[Standard model] Horizontal motorized test stand “MH2 Series”
- Catalogue
The MH2 Series is a horizontal motorized test stand with easy sample placement. Uniformly maintains speed and load direction for highly replicable measurement. With digitally controlled design, setting of measurement modes and speeds is easy. Used with a force gauge, a wide variety of tests can be conducted. [Features] ■Horizontal load can be applied ■Easy sample placement and force gauge set-up ■Test speeds are digitally controlled for more accurate and reliable measurements ■Endurance tests can be done by setting the number of strokes to be performed and load retention time ■Forward and backward speeds for endurance testing can be individually set ■Overload prevention and load value control functions are available * Conditions apply * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
-
[Standard model] Motorized vertical test stand“MX2 Series”
- Catalogue
The MX2 Series is a test stand which can be used as a simplified tension/compression tester when paired with a force gauge and attachments. Compared to measurement with a force gauge alone, results are more replicable. Imada offers over 50 force gauge models and over 100 types of attachments for test stands to provide optimal measurement solutions to our customers. [Features] ■Maintains uniform test speed and direction for highly replicable measurement. －Digital test speed setting －Applies straight load →Reduces inconsistency by different testers ■Endurance, repeat and various other tests －Endurance and repeat tests with timer and counter functions －Provides the following functions when used with ZTS/ZTA force gauge and CB-518 cable ・Overload prevention ・Controls movements by load values ・Automatic start / recording of graph drawing ■Easy operation －Easy test speed and repeat cycle number settings with a dial and monitor ■Peeling tests / friction coefficient measurement －Not only for tension and compression testing, but also suitable for peeling tests and friction coefficient measurement
Target industry: Measurement/Analytical Instruments
-
[Standard model] Analog force gauge “PS Series”
- Catalogue
The PS Series analog force gauge is an easy-to-use accurate tension and compression measurement tool. Imada force gauges are manufactured with advanced technologies and long years of expertise under strict quality control, which maintains their high accuracy over time. Various models are available for a wide range of measurement. [Features] ■Cutting-edge design for hand-held use ■Light-weight robust aluminum alloy body ■Maintains high accuracy for a long time with our unique control mechanism and spring made of special material ■Stop-pin mechanism can perform peak measurement ■Compensates for the weight of attachments with zero-point adjustment mechanism ■Easy-to-read scale ■Comes with various attachments and a carrying case ■12-month warranty * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
-
Imada “Data Analysis Software”
- Catalogue
Imada Data Analysis Software generates real-time graphs from load data transmitted by the digital force gauge, connected to a PC with a USD or RS232C cable. Data management and analysis are easy. ■Benefits of using this software Processing data to graphs visualizes the load transition. Statistics are automatically generated, and data is saved. Data management becomes easy. [Our software] ●Force-Recorder (Standard/Light): load-time (torque-time) graph drawing software ●Force Recorder (Professional): load-displacement (torque-angle) graph drawing software ●Force Logger Plus: multiple force gauge data management software ●ZLINK4: load-time (torque-time) graph drawing software ●ZP Recorder: load-time graph drawing software ●F-S Recorder: load-displacement graph drawing software ●HCC-Easy: tension graph drawing software
Target industry: Measurement/Analytical Instruments
-
[Standard model] Load cell for compression “LC Series”
- Catalogue
The LC Series is a compact and lightweight load cell for compression. Easy installation and handling. With an airtight structure, this series offers great stability and reliability and can be used anywhere. Stainless steel (SUS630) material provides outstanding corrosion resistance. [Features] ■High-precision compression load cell ■Button-shaped, easy to place in narrow gaps ■For data output, connect to an amplifier * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
-
[Standard/High load model] Load cell for compression and tension “DPU Series”
- Catalogue
The “DPU Series” is a load cell suitable for installation into equipment. It’s a rectangular parallelepiped that fits easily into facilities. Embedded screw holes make installation easier. For both tension and compression measurement. Set attachments to the male thread to use. A wide range of attachments is available. [Features] ■The indicator (amplifier) has various input and output functions ・ Select one of four indicators to display load values 1.Desktop model: FA Plus2 2.Sensor replaceable model: eZT * eZ-Connect series: eDPU is compatible with sensor replacement model eZT 3. Portable model (standard): ZTS separate type 4. Portable model (advanced): ZTA separate type ■The following settings are available in all indicators ・ USB/RS232C/Analog, etc. ・ Pass or fail judgment/peak values/overload, etc. ■Generates graphs using included software * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
-
Desktop model amplifier for load cell “FA Plus2 Series”
- Catalogue
The FA Plus2 Series is a desktop model amplifier for load cells. Its box-type design makes it easier to install into equipment. Provides a wide range of output functions, connecting to external equipment such as PLC is easy. According to the specifications of the connected external equipment or PLC, the baud rate (communication speed) can be adjusted, and output can be transmitted at 100 data/second via serial communication (RS-232C). At a sampling speed of 2000 cycles/second, sudden changes of force can be measured without error. [Features] ■Clear display, easy to use ■Pass or fail and speedy judgement ■Has a wide range of output functions ■Easy-to-install design ■Can be configured with industrial power supply (optional) * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
-
Sensor interchangeable amplifier “eZT”
- Catalogue
The “eZT” is a sensor-interchangeable amplifier. Load cells can be changed without any adjustment required. Based on the equipment and environment, replace load cells of different shapes and functions to perform routine various measurements. Can be kept as a spare sensor unit for everyday measurement. [Features] ■A wide range of applications ・Different types of force (compression and torque) can be measured by a single unit of eZT ・Measurement with a big gap between low and high load values can be handled by a single unit of eZT * Only one load cell at a time can be attached to an eZT. ■Cost savings ・Usually the same number of indicators (amplifiers) as the load cells is required. However, since eZT can be used with multiple load cells, you could save the cost of preparing the same number of indicators. ■Reduce processing risk ・Keeping a spare load cell, a malfunctioning one can be replaced immediately without stopping the line. * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
-
Digital force gauge (load measuring tool) “DSV/DST Series”
- Catalogue
The DSV/DST Series is a digital force gauge (load measuring tool) for hand-held use. To make operation simple and accurate, it comes with a variety of functions. If the force gauge detects any change in the tester’s holding position, a warning alarm sounds, indicating the need to check whether the load is still upright. In addition, during continuous measuring cycles, peak values are automatically updated and saved. This function contributes to improved work efficiency as it isn’t necessary to keep resetting and saving values after each measurement. [Features] ■Up to 30 hours of battery life ■Can be charged from PC or mobile batteries ■Easy data management with the included software ■Up to 10000N * For details, please refer to the product specifications or feel free to contact us.
Target industry: Measurement/Analytical Instruments
-
Chip peeling fixture “GT Series”
- Catalogue
The GT Series is a fixture for peel (shear) strength testing of electronic parts. Compact and lightweight, this series can be used for low load values and in narrow places. Easy measurement at low cost. GT-10: attach a hook to the chip to be tested, pull up and measure the peel strength GT-20: push the fixture against the chip and measure the shear (extrusion) strength [Features] ■Fixture for peel (shear) strength testing of electronic parts ■Compact and lightweight, suitable for low load values and use in narrow places ■Easy measurement at low cost * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
-
Lead-free solder testing fixture “LF”
- Catalogue
The LF is designed for solder strength testing of QFP lead joints using lead-free soldering. Comes with 2 types of tables at different angles of 45° and 90°. Accurate and fine positioning on a precision XY stage. You can perform tests compliant with JIS Z3198-6 (2003) “Test methods for lead-free solders Part 6: Methods for 45°pull test of solder joints on QFP lead” and JIS Z3198-7 (2003) "Test methods for lead-free solders Part 7: Methods for shear strength of solder joints on chip components” [Features] ■Fixture to measure tensile strength and shear strength of solder joints ■Accurate and fine positioning on a precision XY stage ■JIS compliant strength tests * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
-
Flat chuck "GC series"
- Catalogue
The GC Series is a multi-purpose flat chuck which can be used for thin to thick samples. As a tensile strength test chuck for various materials, it can be mounted on our force gauge. The opening is wide, suitable for various applications. Three types of selections for different load values and opening sizes. [Features] ■Wide opening for various applications ■Three different types for different loads and opening sizes ■Tensile strength measurement attachment which can grip from thin to thick samples * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
-
Forming press test fixture “PR Series”
- Catalogue
The PR Series is a fixture for pressure resistance testing of retort pouches, heat-sealing wrappers, general food wrappers, cardboard, etc. JIS standard compliant pressure resistance tests can be done when used with dedicated force gauge, test stand and connecting cable. (JIS Z0238:1998 standard partially compliant) [Features] •Accurate results with biaxial structure, which maintains samples in parallel for uniform load application •For endurance testing, use with our recommended product configuration to set test speed, repeat cycle number, load value, timer and other options for optimal performance * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
-
Film puncture test fixture “TKS Series”
- Catalogue
The TKS Series is a film puncture test fixture ideal for thin samples such as liquid crystal films, PET bottles, films, aluminum foils and metallic foils. When used with our force gauge and test stand, you can perform tests partially compliant with JIS Z1707(1997) “General rules of plastic films for food packaging, 7.4 Puncture test”. [Features] - TKS-20N: for thin films up to 20N, affordable range - TKS-250N: for liquid crystal films, aluminum foils, PET bottles and various other materials up to 250N Samples are held firmly on the table by rubber rings [Recommended product configuration] - Film puncture test fixture: TKS-20N (max. 20N) / TKS-250N (max. 250N) - Standard model digital force gauge: ZTS series - Motorized test stand: MX2-500N - Load control cable: CB-518 * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
-
[Horizontal model] Manual test stand “SH Series”
- Catalogue
The SH Series is a manual test stand that uses the screw feed method to precisely adjust position for stable thrust. Horizontal table design allows easy sample placement. The SH-1000 comes with a cover to prevent contamination by sample fragments. The SH-3000 is suitable for strength testing of a variety of materials up to 3000N. [Features] ■Wheel-operated handle stand ■Horizontal table design for easy sample placement ■Screw feed method enables precise adjustment for stable thrust ■Designed to pair with various Imada force gauges * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
-
Simplified manual test stand “SVL-1000N” “SVH-1000N”
- Catalogue
Used with a force gauge, the SV Series can measure tension and compression up to 1000N. As test conditions are applied uniformly, highly replicable measurements are achieved. Load measurement is easily done by lever or handle operation. The SVL-1000N comes with a lever for better work efficiency. The SVH-1000N has a handle for great travel distance control. [Features] ■Up to 1000N of tension and compression load ■Stroke adjustment with mechanical stopper ■Applied to a wide range of measurements with various options ■Compact and lightweight, easy to carry [Features] ■SVL-1000N, lever type Easy lever operation, suitable for work efficiency improvement ■SVH-1000N, handle type Suitable for frequent travel distance adjustments (3mm / rotation) * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
-
Food firmness measurement unit “FCA-DSV-50N Series”
- Catalogue
The "FCA-DSV-50N Series" is a test stand which can perform a compression test with a fixed amount of pressure. Easy operation with lever. With included attachments, multiple actions can be applied: squash/push-in, cut/crack. In addition, the force gauge can be connected to a PC with a USB cable to transmit data. With the included software, the collected data is processed and managed. [Features] •Easy squashing force measurement with a fixed amount of pressure •Adjusts push-in amount with a knob •Easy operation with a lever, offering high replicability •During continuous measuring cycles, peak values are automatically updated and saved, contributing to better work efficiency •Force gauge can be connected to a PC with a USB cable •With the included software, data management is easy •Stainless steel for easy cleaning * For details, please download our PDF documents or feel free to contact us. [Video is now available] A video of firmness testing of cookies is available. Please have a look.
Target industry: Measurement/Analytical Instruments
-
Rheometer (texture analyzer) “FRTS Series”
- Catalogue
What is the bread fluffiness? What is the crunchiness of rice crackers? The FRTS series is a tester to evaluate, quantify and analyze food texture, important for R&D and quality control in the food industry. In addition to the included attachments, dozens more optional selections are available for different types of food. [Features] ■Target food Cakes, pastes and doughs, bread, rice (cooked/raw), noodles, beans (cooked/raw), eggs, meat and fish (cooked/raw), vegetables, fruits and many others ■Straightforward operation with user-friendly touch panel When selecting the food and the standard to be tested from the list, recommended test parameters are displayed Easy manual test parameter settings and registration ■Accurate and precise measurement High accuracy: ± 0.2% F.S. ± 1 digit High-speed sampling: 1000Hz, peak value of hard ingredients can be accurately obtained with high responsiveness ■Easy data management Easy graph drawing using the included software (load-time and load-displacement versions) Automatic calculation of hardness, adhesiveness, cohesiveness, adhesive force, elasticity, gum properties, etc. ■Easy to clean Stainless steel measuring unit with removable tray, easy cleaning [Video is now available] A video of food texture measurement is available.
Target industry: Measurement/Analytical Instruments
-
Motorized torque stand “MTS Series”
- Catalogue
The “MTS Series” is excellent at maintaining constant rotation speed, contributing to highly precise torque measurement. Applications include opening torque of PET bottles or pharmaceutical bottles, operating force of rotary switches and twisting strength of boards. The measurement provides high replicability of various rotating and twisting forces. Some options allow angle-torque analysis, which is useful for characteristic evaluation. [Features] ■Regulates the rotating speed for highly precise torque measurement ■Automatic testing based on the input parameters, measuring cap opening torque, angle-torque analysis (optional), etc., applicable for a wide range of measurements ■Offers testing of various samples with clamping attachments from our wide- ranging product lineup * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
-
Driver torque meter “I Series”
- Catalogue
The I Series is a driver torque meter for electric and torque drivers. Supports routine inspection with easy operation. Serial data output for data management. [Features] ■Torque measurement of electric and torque drivers ■Easy operation for routine inspection ■Serial data output for efficient data management * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
-
Peel tester “IPTS-5N”
- Catalogue
The IPTS-5N is a peel tester for embossed carrier tape, compliant with JIS standards. It provides high usability and accuracy. From placing the sample, measurement to generating graphs can be done in easy operations. With 6 speed settings, high speed testing is also achievable. Software is included for accurate graph drawing. [Features] ■Allows peel testing at high speed, a maximum speed of 1500mm/min ■Comes with drawing software to generate accurate graphs by processing data transmitted at 2000 data/second ■Embossed carrier tape peel testing partially compliant with JIS/IEC standards JIS C0806-3 (2014) “Packaging of Components for Automatic Handling” IEC 60286-3 (2013) “Packaging of Components for Automatic Handling” * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
-
[Video is now available] Automatic harness tester "ACT Series"
- Catalogue
The ACT Series is an electric crimp terminal tensile strength tester. With this tester, crimping force of crimp terminals in wire harnesses can be easily measured. The operation is simple: with just a single button, measuring and saving data can be done, which dramatically improves the efficiency of harness testing. Partially compliant with JIS C 2805, JIS C 5402-16-4, UL 486A-486B standards. [Features] ■2 test modes are available: "Break” (pull and break) and “Keep” (with conditions of time and load values) modes ■Up to 26 sets of test parameters can be saved and used repeatedly ■Includes software for data management and condition settings on PC ■Offers testing partially compliant with: JIS C 2805 (2010) " Crimp-type terminal lugs for copper conductors, 7.11 tensile strength test" ※Other tests compliant with JIS/UL standards are available [Video is now available] A video of wire harness crimping (pull and break) test is available. Please have a look. * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
-
Acupuncture needle strength and sharpness test attachment "MED-ACU-2N"
- Catalogue
The MED-ACU-2N is an attachment to evaluate the strength and sharpness of acupuncture needles. Set the attachment to the force gauge, press the needle against the iron plate to check the strength, or pierce an aluminum foil sheet to test its sharpness. [Features] ■Attachment for strength and sharpness evaluation of acupuncture needles ■Needle sizes: φ0.1 to 1mm ■Partially compliant with JIS Standards testing * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
-
Probe tack test attachment “MED-IS-20N”
- Catalogue
The MED-IS-20N is a specified attachment for adhesive tack testing of adhesive plasters, etc. Used with a force gauge and test stand, it offers measurements partially compliant with some standards. [Features] ■Offers testing partly compliant with standards ・Partially compliant with ASTM D2979: 2016 “Standard Test Method for Pressure-Sensitive Tack of Adhesives Using an Inverted Probe Machine” ・The Japanese Pharmacopoeia 6.12. (3.4.), 17th revision: “Probe tack testing” * When used with dedicated force gauge and test stand. * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
-
Coating adhesion test fixture “TH Series”
- Catalogue
The “TH Series” is a fixture for coating peel adhesion tests. It works through bonding its peeling head onto a coated surface and pulling it off. When used with dedicated force gauge, test stand and cable, we can offer testing systems partially compliant with specifications laid out in JIS K 5600-5-7(1999) “Testing methods for paints Part 5: Mechanical property of film, Section 7: Adhesion test (Pull-off method)” or ISO 4624(2002). [Features] ■Bond its peeling head onto a coating surface and pull it off to test the adhesion strength ■Offers testing systems partially compliant with JIS and ISO Standards * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
-
90° peel testing table "P90-200N Series"
- Catalogue
The “P90-200N Series” is suitable for 90° peel tests on adhesive tapes, sheets affixed to substrates. When used with dedicated force gauge, test stand, cable and software, we can offer testing systems compliant with a part of JIS Z0237:2000 “Testing methods of pressure-sensitive adhesive tapes and sheets, 10. Adhesive strength” or JIS C5016: 1994 “Test methods for flexible printed wiring boards, 8.1 Conductor Peeling Strength”. [Features] ■The slide table moves along with the test stand to keep the peeling surface at a constant 90° angle ■The recommended product configuration allows drawing of load-time graphs and automatic calculation of average peeling force in the selected range * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
-
Coefficient of friction fixture "COF series"
- Catalogue
The COF Series is a fixture to calculate both static and kinetic friction of coefficient in just one measurement. Can perform measurement of friction of coefficient on paper and film, drawing and printing graphs using the software included. When used with dedicated force gauge and test stand, you can perform tests partially compliant with JIS P 8147(1994), “Paper and Board - Determination of the Static and Kinetic Coefficients of Friction”, JIS K 7125 (1999) “Plastics - Film and sheeting - Determination of the coefficients of friction” and ISO 8295(1995). [Features] -Easy calculation of static and kinetic friction coefficients in just a single test with included software Able to draw and print graphs -Available in both vertical and horizontal test stands, based on the size of customer’s workspace * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
-
Film chuck “FC Series”
- Catalogue
The “FC Series” is a film chuck whose grip materials and clamping methods are changeable according to the sample to be tested. When used with dedicated force gauge, test stand and connecting cable, you can perform tests partially compliant with JIS Z1711 (1994) “Polyethylene film bags, 8.4 heat seal strength test” and other wide-ranging tests. [Features] -Ideal for tensile strength tests, gripping thin samples such as films ・Apart from films, can be used for the measurement of thin samples such as adhesive tapes and magnetic cards -Wide line-up of models ・Lightweight model "FC-21": light weight, suitable for gauges of lower load values ・Standard model “FC-20/40”: up to 500N ・Single-side urethane type “FC-21U/41U”: prevents slipping and tearing of ultra-thin samples ・Lever model "FC-21UQ": single-side urethane type, can be set up in just one operation -Custom manufacturing for different widths, thicknesses and usages is also available upon request. * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
-
[Long stroke model] Vertical manual test stand “HV Series”
- Catalogue
The HV Series is a vertical manual test stand for both tension and compression measurement. Wheel-operated handle guarantees reliable measurement. This series can be used for full-scale measurement at affordable prices. [Features] ■Screw feed method enables precise adjustment for stable thrust ■Designed to pair with various Imada force gauges ■Compact and lightweight simple tester at affordable prices ■When used with optional measuring instrument, travel distance can be measured simultaneously * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
-
Multi-Channel Digital Ultrasonic Flaw detector ULTECT21
- Catalogue
Target industry: Measurement/Analytical Instruments
-
Desktop Ultrasonic Imaging System D-view
- Catalogue
Target industry: Measurement/Analytical Instruments
-
Portable Phased Array Ultrasonic Inspection Instrument PA4
- Catalogue
Target industry: Measurement/Analytical Instruments
-
VCC-5CXP3M (Monochrome) / VCC-5CXP3R (Color) / VCC-5CXP3NIR (Near-infrared)
- Catalogue
Max. 85fps high speed (at CXP6・8bit/CXP6・10bit), 5.3M resolution, 29x29x55mm small footprint CoaXPress camera utilizing CMOS image sensor. The camera features versatile functions such as external trigger, long distance transmission, ROI, sub-sampling, defective pixels correction, sequence control, shading correction, PoCXP, etc. to make easier to see the region of the object you want to see, and contributing to higher inspection efficiency. This model “VCC-5CXP3” can also be used for “Multi-camera System”, which enables to connect Max. 40pcs of cameras and synchronize them by only 1 PC. For example, when 5pcs of CoaXPress frame grabber board (8ch) is installed in 1 PC, Max. 40pcs of camera (at 1 lane) or any preferred combination of CoaXPress camera can be connected and synchronized according to the customer’s application. ※For further information on VCC-5CXP3 or Multi-camera system, please contact our Sales division.
Target industry: Semiconductors/LCD/FPD Measurement/Analytical Instruments Industrial Machinery/Devices
-
VCC-2CXP2M (B/W)
- Catalogue
The enclosure of VCC-2CXP2M is 29mm cubic size small footprint, and its compact size is suitable for embedded applications such as robot vision, drone installation, and machine vision. Also, it can transfer images at 85fps at CXP-3 (8bit/10bit) output with global trigger shutter operation, so that it can capture objects on the production line such as PCB, foods, medicines and small parts clearly. Furthermore, the functions such as external trigger, long distance transmission, ROI, sub-sampling, defective pixels correction, shading correction, PoCXP, etc. are installed to make easier to see the region of the object you want to see, and contributing to higher inspection efficiency. For further information, please contact our sales division.
Target industry: Semiconductors/LCD/FPD Measurement/Analytical Instruments Industrial Machinery/Devices
-
VCC-GC10V31L (B/W)
- Catalogue
22mm cubic in size, ultra light-weight and small PoCL-Lite interfaced B/W camera. Only 0.65W consumed for power consumption so that it is easy to use for temperature concerned embedded systems like semiconductor related equipment. Power can be supplied via 14pins thin cable and total system cost can be reduced. Best suited for size and weight-conscious systems currently using remote head cameras and others.
Target industry: Semiconductors/LCD/FPD Measurement/Analytical Instruments Automotive/Transport Machinery
-
VCC-25CXPHSM (B/W) / VCC-25CXPHSR (Color)
- Catalogue
Max. 150fps high speed, 25M high resolution, 65x65x93.3mm small footprint CoaXPress camera. Packed with versatile functions such as ROI, shading correction, external trigger, gamma correction etc. 【Features】 ◆25M pixels・Global shutter・CMOS sensor ◆65×65×93.3mm small footprint ◆CoaXPress CXP2.0 CXP-12、CXP-6 complied ◆Video output: HD-BNC terminal ◆Max. 150fps (at CXP-12・8bit) high speed ◆Versatile functions suitable not only for FA application, but also for the application which requires long distance transmission such as measurement, robot vision, drone, and research/observation. Ex.) Shading correction/Gamma correction/Defect pixel correction by user/External trigger/Vertical and horizontal flip/ROI/Black level adjustment/Test pattern output etc…
Target industry: Semiconductors/LCD/FPD Measurement/Analytical Instruments Industrial Machinery/Devices
-
QCM TRIAL KIT
- Catalogue
The “QCM TRIAL KIT” that can detect and measure trace amount of mass yet produced with lowered cost is now for sale. A product that integrates together sensor element, frequency counter and device software, designed to operate with just a computer. By rendering the compact and portable “QCM TRIAL KIT” the ability to utilise 3 sensor elements simultaneously and calculate the average measured result, the device evolves into “TQCM”. ※Please follow the links below for further information and feel free to inquire
Target industry: Measurement/Analytical Instruments
-
VCC-2CXP6M (B/W) / VCC-2CXP6R (Color)
- Catalogue
The enclosure of VCC-2CXP6 is 29x29x55mm small footprint, and its compact size is suitable for embedded applications such as robot vision, drone installation, and machine vision. Also, it can transfer images at 239fps at CXP-6 (8bit) output with global trigger shutter operation, so that it can capture objects on the production line such as PCB, foods, medicines and small parts clearly. Furthermore, the functions such as external trigger, ROI (vertical direction only), 2x2 binning (B/W model), defective pixel correction, white balance, etc. are installed to make easier to see the region of the object you want to see, and contributing to higher inspection efficiency. For further information, please contact our sales division.
Target industry: Semiconductors/LCD/FPD Industrial Machinery/Devices Measurement/Analytical Instruments
-
VCC-SXCXP3M (B/W) / VCC-SXCXP3R (Color) / VCC-SXCXP3NIR (Near-infrared model)
- Catalogue
The enclosure of VCC-SXCXP3 is 29mm cubic footprint, and its compact size is suitable for embedded applications such as robot vision, drone installation, and machine vision. Also, it can transfer images at 168fps at CXP-3 output with global trigger shutter operation, so that it can capture objects on the production line such as PCB, foods, medicines and small parts clearly. Furthermore, the functions such as external trigger, ROI, sub-sampling, defective pixel correction, sequence control, shading correction, etc. are installed to make easier to see the region of the object you want to see, and contributing to higher inspection efficiency. NIR (Near-infrared) model “VCC-SXCXP3NIR” is also available. With this model, images can be taken even if the target is at out of visual light range that cannot be inspected with human eyes or normal camera (ex. a candy in the opaque package). For further information, please contact our sales division.
Target industry: Semiconductors/LCD/FPD Measurement/Analytical Instruments Industrial Machinery/Devices
-
Nut/Bolt welding defect detention system navi series
- Catalogue
Our nut/bolt welding defect detection system, the navi, checks whether workpieces are set correctly just before welding begins with high accuracy. As the detection occurs immediately before welding begins, welding defects are prevented, reducing defect product circulation. The system detects workpiece defects such as wrong sizes or directions, misalignment, loose electrodes, thread length mismatching, different tip shapes, etc. [System Lineup] • Nut welding defect detection system - For manual operations: Handy-navi - For robot and automated operations: Robo-navi-Single - For robot and automated operations: Robo-navi-Double • Bolt welding defect detection system - For manual operations (manual setting): Handy-navi-Bolt - For manual operations (feeder setting): Handy-Robo-navi-Bolt - For robot and automated operations (feeder setting): Robo-navi-Bolt * For more details, please download our PDF documents or contact us.
Target industry: Automotive/Transport Machinery Consumer Electrical Appliances Measurement/Analytical Instruments
-
『QCM TRIAL KIT』
- Catalogue
Our QCM sensor is included in this Trial Kit. QCM stands for Quartz Crystal Microbalance and can detect a very small amount of adhered substance according to the changes in resonance frequency of of the quartz resonator. Compact size to carry easily. 【characteristics】 ■Making full use of the stable characteristics of quartz resonators ■Capable of sensing a very small amount of mass ■Just connect to your PC ■Portable size Feel free to contact us or check our catalogues for more information.
Target industry: Measurement/Analytical Instruments
-
VCC-VCL5 (VGA Resolution) / VCC-SXCL5 (SXGA Resolution)
- Catalogue
VGA and SXGA resolution, Max. 578fps (VCC-VCL5/at 3tap VGA output) and 136fps (VCC-SXGA5/at 3tap), high speed, 29mm cubic Camera Link camera utilizing SONY Pregius image sensor. Packed with versatile functions suitable for PCB inspection, AOI, PTP inspection, FPD inspection, small parts inspection, robot vision, drone, machine vision, etc. Please refer to “Products and service features” section in this page or our product catalog for the details on camera specifications.
Target industry: Semiconductors/LCD/FPD Measurement/Analytical Instruments Industrial Machinery/Devices
-
【Sales Agents Wanted】Small-scale Oil Flowmeter
- Catalogue
- Distributor required
The small-scale oil flowmeter is a volumetric flowmeter employing a gear-type rotor specifically designed for oil and which can be used for a wide range of measurements, for example in measuring engine oil or fuel oil for marine vessels and boilers. Furthermore, flowmeters specifically designed for measuring high-temperature fuel like ship fuel are available. ■Electronic Counting Unit Digital Display Totalizing counter, reset counter and momentary flow rate are alternatively displayed. Furthermore, it is possible to set the momentary flow rate at 1 hour or 1 minute intervals. Multifunctional Counting Unit Ramified Flow Rate Display, Forward/Reverse Detection, Self-diagnosis,Battery Consumption Alarm etc.
Target industry: Measurement/Analytical Instruments
-
VCC-5CL4M (B/W) / VCC-5CL4R (Color)
- Catalogue
5M resolution, Max. 114fps high speed, 55x55x25 small footprint Camera Link camera. Packed with versatile functions perfectly suitable for semiconductor inspection, panel inspection, parts inspection, medical inspection, measurement, appearance inspection, etc. For those who may prefer the faster type of camera, CIS offers VCC-5CL4MHS (monochrome, high speed) and VCC-5CL4RHS (color, high speed), too. For further information for high speed model, please visit our website or contact our sales division.
Target industry: Industrial Electrical/Control Equipment Measurement/Analytical Instruments Optical Equipment/Parts
-
VCC-12CL4M (B/W) / VCC-12CL4R (Color)
- Catalogue
12M resolution, Max. 62.984fps high speed, 55x55x25 small footprint Camera Link camera. Packed with versatile functions perfectly suitable for semiconductor inspection, panel inspection, parts inspection, medical inspection, measurement, appearance inspection, etc.
Target industry: Industrial Machinery/Devices Measurement/Analytical Instruments Other
-
4-wire analog resistive touch screen “TP01 series”
- Catalogue
You won’t believe it’s a resistive touch screen. The TP01 series is truly light and smooth. Requires less than half the activation force of our conventional screens! Together with our control board, multi-touch input such as pinch-in and out can be set up. Multi-touch input is widely sought-after in the industrial and medical equipment industries, where reliable operation is required. We strive to meet our customers’ every need.
Target industry: Industrial Machinery/Devices Communications Industry Measurement/Analytical Instruments
-
Light-operation rotary switch “NR01 series”
- Catalogue
“Subminiature rotary switch for reliable operation” Light and reliable switching with crisp operation ■Looking for subminiature rotary switches? → Small, simple and reliable switch ■Want to have better usability than DIP rotary switches? → With an integrated steel ball, light and reliable switching is ensured ■No need for complicated functionality → Medium-ranged switch with simple function of 3 to 5 contact points in a single circuit Ideal for electronic equipment miniaturization and higher-density mounting * For details, please download our catalog or contact us.
Target industry: Industrial Electrical/Control Equipment Measurement/Analytical Instruments Medical Instruments
-
Relief Valve “RA Series”
- Catalogue
- Distributor required
- Partnership required
[Features] • High precision cracking and great sealing capacities • Compact and light-weight, ideal for fluids which can be released into the atmosphere • A wide variety of diameters • Delivered after cracking pressure is adjusted at our factory
Target industry: Medical Instruments Measurement/Analytical Instruments
-
Check Valve “C/CF Series”
- Catalogue
- Distributor required
- Partnership required
[Features] • Simple design and low price • Reduces the load on the sealing material by implementing a double touch method that combines the O-ring and metal seal • A wide variety of diameters and seal materials
Target industry: Medical Instruments Measurement/Analytical Instruments
-
Mass flow controller “FC-R7700”
- Catalogue
- Distributor required
- Partnership required
As the field-proven standard for a range of applications, Aera FC-7700 series delivers precise flow control, while offering the economic benefits of elastomer seals. This series provides high reliability and superior performance for process and equipment engineering work. [Benefits] • Fast response – less than 2 second flow-settling time between set points • Easy integration – with standard connectors and critical dimensions
Target industry: Resin/Plastic/Rubber Products Measurement/Analytical Instruments Industrial Machinery/Devices
-
VCC-25CXP1M VCC-25CXP1R
- Catalogue
25M high resolution, high speed, 65x65x65mm small footprint CoaXPress camera. Packed with versatile functions such as ROI, sequence control, shading compensation, external trigger et.al. 【Features】 ◆25M pixels・Global shutter・CMOS sensor ◆65mm cubic size small footprint ◆CoaXPress I/F ◆Video output DIN terminal ◆Max. 81.83fps Max. 40m of image transfer is possible at 25Gbps with CXP6x4 lanes ◆Versatile Functions Ex.) White balance/Shading correction/Sequence control/Defect pixel correction by user/External trigger/Vertical and horizontal flip/ROI/Subsampling/GenICam applicable/Black offset/Test pattern output etc...
Target industry: Measurement/Analytical Instruments Optical Equipment/Parts Industrial Electrical/Control Equipment
-
VCC-120CXP1M VCC-120CXP1R
- Catalogue
- Distributor required
- Partnership required
120M Ultra high resolution, 65x65x68mm small footprint CoaXPress camera. ◆ CANON 120MXSM (13280×9184） sensor ◆ 120M ultra high resolution ◆ 9.4fps Frame rate
Target industry: Industrial Machinery/Devices Industrial Electrical/Control Equipment Measurement/Analytical Instruments
-
Ring gauge (Ceramic)
- Catalogue
- Compared to steel, greater anti-abrasion, more durable over time with no dimensional changes - No rust or corrosion, easy maintenance - Contains no magnetic materials so no worries about magnetization - Less plastic deformation caused by scratches and dents, with no burrs or swellings - Light-weight and provides easy measurement - Ring sizes are laser marked on gauges
Target industry: Measurement/Analytical Instruments Industrial Electrical/Control Equipment Industrial Machinery/Devices
-
Ring gauge (Steel)
- Catalogue
Used as master gauges for zero adjustment of hole-test, cylinder gauge, inside micrometer, dial caliper, inner diameter measuring, inner dial comparator, etc.
Target industry: Measurement/Analytical Instruments Industrial Electrical/Control Equipment Industrial Machinery/Devices
-
Pin gauge set (Ceramic)
- Catalogue
Made of ceramic with great durability! Anti-rust! Provides overall cost reduction.
Target industry: Measurement/Analytical Instruments Industrial Electrical/Control Equipment Industrial Machinery/Devices
-
Pin gauge set (Steel)
- Catalogue
Individual pin gauges are available. JCSS adjustments can be applied. For customized gauges, please feel free to contact us.
Target industry: Measurement/Analytical Instruments Industrial Electrical/Control Equipment Industrial Machinery/Devices
-
Pin gauge with maintenance-line AML series
- Catalogue
With maintenance-line checking for wear and tear, it’s easy to spot any damage to the tip. Sub-zero treatment applied.
Target industry: Measurement/Analytical Instruments Industrial Electrical/Control Equipment Industrial Machinery/Devices
-
Aluminum pin vice
- Catalogue
“Can’t we grip 2 sizes with just one pin vice...?” “When tightened once, the collets get deformed.... Is there any solution?” “I’m worried about damaging the pin gauge!” If you have concerns such as these, try our pin vice!
Target industry: Measurement/Analytical Instruments Industrial Electrical/Control Equipment Industrial Machinery/Devices
-
LEVELNIC DL-S3
- Catalogue
For high-accuracy leveling, straightness and flatness measurement of surface plates, machine tools, etc. Quick measurement with maximum resolution of 0.001mm/m with no data reading errors.
Target industry: Measurement/Analytical Instruments Industrial Electrical/Control Equipment Industrial Machinery/Devices
-
LEVELNIC DL-S2W
- Catalogue
For high accuracy leveling, straightness and flatness measurement of surface plates, machine tools, etc. Quick measurement with maximum resolution of 0.001mm/m with no data reading errors. Wireless system is standard.
Target industry: Measurement/Analytical Instruments Industrial Machinery/Devices Industrial Electrical/Control Equipment
-
Welding gauge WGU-7M
- Catalogue
- A wide variety of welding measurements - Suitable for general welding, reinforcement or assembly work at construction sites, shipyards, bridge building sites, etc. - Measurements can be read on the same surface so it’s easy to use
Target industry: Measurement/Analytical Instruments Industrial Machinery/Devices Industrial Machinery/Devices
-
Taper gauge
- Catalogue
Quick measurement of grooves or gaps!
Target industry: Measurement/Analytical Instruments Industrial Machinery/Devices Industrial Electrical/Control Equipment
-
Monitor for TSI VM-5 Series
- Catalogue
VM-5 Series monitor has flexible options of 10 and 8 slots, rack mount type and power source built-in. Standalone type allows for configurations for small to middle scale rotating machinery for TSI (Turbine Supervisory Instrumentation) for large turbine generator. All settings and checks can be done on the front panel, without disturbing the operation. Modules are available to cover every function that is required for rotating machinery monitoring, from displacement/vibration to zero-speed. The monitor can be flexibly configured to the type and size of the asset to be monitored.
Target industry: Measurement/Analytical Instruments Information/Communication Devices Industrial Machinery/Devices
-
Large Rotating Machinery Condition Monitor VM-7 Series
- Catalogue
The fully digitalized monitor modules cover 17 measurement parameters used for TSI and other rotating machinery monitoring. The multi-functional modules can be configured on PC to meet monitoring needs.
Target industry: Measurement/Analytical Instruments Information/Communication Devices Industrial Machinery/Devices
-
Portable Vibration Analysis System Kenjin
- Catalogue
Making it an excellent choice for vibration analysis on plant assets without permanent analysis system, and also for acquisition of transient data during startup/shutdown. This system can save time and money due to ease of use. Advantages ・ Easy data acquisition during startup/shutdown, as well as in abnormal conditions. ・ Abnormal machine conditions are easily identified to help prevent damage and catastrophic failures.
Target industry: Measurement/Analytical Instruments Information/Communication Devices Industrial Machinery/Devices
-
Analysis and Diagnostic System infiSYS RV-200
- Catalogue
infiSYS RV-200 is a vibration analysis & diagnostic system that analyzes data for its phase mark and frequency and then plots analysis graphs required for vibration analysis. Advantages · By optimizing plant operation, it supports customer’s productivity and reliability. · Detects abnormal symptoms from vibration characteristics or subtle change in vibration. Reduces risks of unplanned production shutdown by taking proactive approach. · Advanced diagnostics realizes assumption of causes and areas of anomalies and detailed analysis. Help users practice optimum, efficient maintenance.
Target industry: Measurement/Analytical Instruments Information/Communication Devices Industrial Machinery/Devices
-
CMS Overview
- Catalogue
As much as 40% of plant equipment problems result from vibration on rotating equipment. SHINKAWA's CMS detects failure symptoms at early stages with monitoring, analyzing and diagnosing vibration from rotating machinery. Prevent failures/accidents contributes to plant’s efficient, continuous safe operations.
Target industry: Measurement/Analytical Instruments Information/Communication Devices Industrial Machinery/Devices
-
Noncontact Displacement/Vibration Transducers FK Series
- Catalogue
Eddy-current transducers that are used for measuring Shaft Vibration, Axial Position, Rotating Speed and Phase Mark (Phase Reference) from small rotating machinery to large critical machinery such as turbines and compressors in plants. These have environmental friendly design that have become the concern for all, including lead-free soldering, compact body, and are RoHS directive (Restriction of the Use of Certain Hazardous Substances in Electrical and lectronic Equipment) compliant. Also, the design comply with the American Petroleum Institute (API) Standard 670 that are widely referred to for machinery protection systems in oil refineries, petrochemical plants, etc.
Target industry: Measurement/Analytical Instruments Information/Communication Devices Industrial Machinery/Devices
-
Control unit C-28C C-48
- Catalogue
- Distributor required
- Partnership required
This is an instrument which convert the electric signal, display and output.Control unit C-28C and C-48 should be combined with O2 sensor then control cell temperature and convert cell EMF to O2 value for display and signal output. They have many features such as folloings. ・Compact DIN size. (96mm×96mm) ・Easy to handle. ・Readable large display. ・Serial communication function (RS232C) is normally equipped. Please feel free to contact for details or refer the brochure.
Target industry: Measurement/Analytical Instruments Industrial Electrical/Control Equipment Precision Equipment
-
Built-in type Zirconia oxygen analyzer TB-WI
- Catalogue
- Distributor required
- Partnership required
You can use this model widely for from ppm measurement to 100% oxygen by using only this model. TB-IIF is a built-in type oxygen analyzer whose detective element is made of Zirconia electrolyte. TB-IIF-P sensor and C-101 control unit are installed altogether in a box for portable uses.TB-WI has many features such as followings. ・Reasonable price ・Wide range application, from 1ppm to 100%O2. ・Output range can select freely. ・Serial communication function is equipped normally. ・85V~264VAC power supply can be applied. Please feel free to contact for details or refer the brochure.
Target industry: Measurement/Analytical Instruments Industrial Electrical/Control Equipment Precision Equipment
-
Zirconia oxygen sensor TB-IIF
- Catalogue
- Distributor required
- Partnership required
TB-IIF is an oxygen sensor whose detective element is made of Zirconia electrolyte. The sensor works as oxygen analyzer together withour control unit.The main use of this sensor is for measurement of trace or low oxygen in inert gas, moreover for dirty gas such as flue gas can be used well. Our TB-IIF has many features such as followings. ・Wide range application, from 1ppm to 100%O2. ・Built-in multi-filter protects detector from dirt and corrosion. ・Accepts 0.2 to 5 L/min flow rate. ・Simple structure, easy maintenance. Please feel free to contact for details or refer the brochure.
Target industry: Measurement/Analytical Instruments Industrial Electrical/Control Equipment Precision Equipment
-
Ultrasonic gas analyzer US-IIT-SH
- Catalogue
- Distributor required
- Partnership required
US-IIT-SH can measure High concentration of Hydrogen and Helium at the range of 0~100%. This US-IIT-SH is an ultrasonic gas analyzer which is used ultra sonic element in detective part.Ultrasonic gas analyzer can theoretically measure all kinds of mixture of two gases.It becomes enabled 0-100% of measurement ranges of Hydrogen gas and the Helium gas though conventional model could measure at the range of only 0-50%. Please feel free to contact for details or refer the brochure.
Target industry: Measurement/Analytical Instruments Industrial Electrical/Control Equipment Precision Equipment
-
Ultrasonic gas module US-100-5VS/12VS
- Catalogue
- Distributor required
- Partnership required
This US-100-5VS/12VS is a sensor module which is used ultra sonic element in detective part.Ultrasonic gas analyzer can theoretically measure all kinds of mixture of two gases. There are no consumables and it is long-lasting. Calibration and maintenance are unnecessary for a long time. And because warm-up is not necessary and measurements can be done the moment the power is supplied. Please feel free to contact for details or refer the brochure.
Target industry: Measurement/Analytical Instruments Industrial Electrical/Control Equipment Precision Equipment
-
VM Series High Vacuum Pumping Systems
- Catalogue
- Distributor required
- Partnership required
ULVAC KIKO Inc. is always looking for sales agents. Please feel free to ask us. - Compact hyper-vacuum exhaust equipment which compactly unites mechanical booster pump, oil-sealed rotary pump and pipes - The most suitable for lab tests because of easy handling and maintenance check
Target industry: Semiconductors/LCD/FPD Measurement/Analytical Instruments Industrial Machinery/Devices
-
MBS Series Mechanical Booster Pump
- Catalogue
- Distributor required
- Partnership required
ULVAC KIKO Inc. is always looking for sales agents. Please feel free to ask us. - Compact type of roots vacuum pump - Possible to greatly increase exhaust velocity in the pressure region where the backing vacuum pump loses its exhaust velocity
Target industry: Semiconductors/LCD/FPD Measurement/Analytical Instruments Industrial Machinery/Devices
-
GCD Series Oil-sealed Rotary Vacuum Pumps
- Catalogue
- Distributor required
- Partnership required
ULVAC KIKO Inc. is always looking for sales agents. Please feel free to ask us. - Chemical type vacuum pump which has surface treatment on the wetted surface - Vacuum pump most suitable as a vacuum drawing which treats special gas and liquid used in chemical or semiconductor industry
Target industry: Semiconductors/LCD/FPD Measurement/Analytical Instruments Industrial Machinery/Devices
All From 87 1 - 80 items are displayed