Target industry: Electricity/Gas/Water Food/Beverage Paper Making/Paper Products
This tester measures coefficient of static friction and kinetic friction The included software draws a graph and automatically calculates coefficient of static and kinetic friction. [Basic Information] - Capacity 2N(200gf)~10N(1kgf) - Accuracy +/-0.2%F.S. - Selectable unit: N/kgf/lbf
Target industry: Semiconductors/LCD/FPD Food/Beverage Paper Making/Paper Products
The torque gauge for bottle opening/ closing torque measurements. Accurate torque measurements are possible with 2000Hz high speed sampling rate. It is ideal for the torque transition analyses by the optional software which draws a graph in detail. The table size and the clamp pin materials are selectable. It helps to hold various samples properly such as a tall sample, a slippery sample etc. [Basic Information] Available for CW/CCW torque. Data sampling rate is 2000Hz. Capacity 2N-m(200N-cm)~10N-m(1000N-cm) Accuracy +/-0.5%F.S+/-1digit. Selectable Unit N-m/ N-cm/kg-m/kg-cm/ lbf-in/ ozf-in Peak hold function Pass/Fail decision function It is possible to output for external equipment such as a PC by USB connection. [The Advance Functions of DTXA series] 1. Angle displacement input and output are possible when mounting a rotary encoder. 2. It can be stored the continuous data directly in a USB flash drive at 100Hz without PC. 3. 1st /2nd peaks detection. It is useful for unopened bottle opening test which have 2 types of torque peak. For example, 1st peak is open-starting torque and 2nd peak is twist-off torque of a tamper-evident band at the test.
Target industry: Medical Supplies/Biotechnology Consumer Products Food/Beverage
Customer request and problem Currently fried chicken process is all done by manual like this. 1. To supply battered chicken from meat wagon to conveyor. 2. Align with chickens on the conveyor 3. Dipping the source 4. To adjust the temperature of fryer There are following problems, Operators can not follow the conveyor speed due to alignment work for chicken. The conveyer has to be stopped to adjust each time. If the input amount of chicken is not stable, temperature goes up and down. Then additional time is needed.
Target industry: Food/Beverage
Customer request and problem Customer would like to make a deluxe ice cream with strawberry source including cut flesh fruit which looks homemade mixed. The gear pump installed in the ice cream machine is very small that fruits become broken. Then mixing process of fruits and source is not possible after filling into cup. Therefore the new process should be inline mixing from ice cream machine to filling machine. 5mm cut fruits have to be chosen by big size pump. Due to small dosing, rotary lobe pump is not possible to transfer exactly due to discharge pressure and its back flow. Customer looks for the pump with small dosing capacity and no damage to strawberry.
Target industry: Food/Beverage Chemical Materials/Products
Customer request and problem The operator has to adjust the valve to fill source all time. Since gated radish is by manual filling, filling accuracy is bad, conveyer and floor are dirty. 1. As filling source is dripping under the conveyer or floor, it is unsanitary and need a lot of time to clean up. 2. As filling volume is not stable, filling has to be more extra for safe side. 3. The valve of existing machine needs to learn in long time for training. 4. Overflowing source is recycling to use again, but not sure about freshness.
Target industry: Food/Beverage Chemical Materials/Products
Customer request and problem 1. To reduce working time from manual to automation. 2. The viscosity of imported tomato paste is not stable. So some level of viscosity should be no problem. 3. Customer wants to be only one working place to transfer multiple tanks.
Target industry: Food/Beverage
Solution Customer uses conventional sanitary pump to transfer jam with fruits for heat exchanger. This process is required higher pressure to increase sterilization efficiency, however, valves cannot be used due to solid contents (fruits). In addition, CIP is not perfect. Then pump parts make contamination caused by fruits seed. So the whole system does not work well.
Target industry: Food/Beverage
Customer request and problem Currently, customer is mixing starch slurry in the open cooker by steam heating. But there are some problems such as risk of contamination by open mixing and mixing failure by very high viscosity(100Pa・s). Customer requests to stop butch production and improve continuous inline process with steam heating and cooling concentrate.
Target industry: Food/Beverage
The “Green Drain” is an odour and insect barrier cover to be placed over drain holes at food processing, pharmaceutical or other factories. Without using insecticides, it physically prevents insects from emerging from drain holes. Prevents unpleasant odors where factory drainage water is discharged gravitationally. As the “Green Drain” doesn’t contain any insecticides or chemical repellents, it’s ideal for food processing or food container manufacturing factories, where such solutions are not recommended. * For details, please download our catalogue or contact us.
Target industry: Food/Beverage Medical Supplies/Biotechnology Other Manufacturing
[Features] • As we use PTFE, our Teflon products are ideal for a wide variety of fluids, including corrosive gases and organic solvents. • A range of options to suit your needs, including 2- or 3-way valves, tube connectors, threaded connectors, etc.
Target industry: Food/Beverage Chemical Materials/Products
We applied the rotary-system pouch packaging scheme to our three-side pouch packaging machine ahead of other manufacturers in the world. The machine is capable of packaging at an ultra-high-speed of 200 to 1,000 pouches/min. We are capable of handling various fills and films to our wide range of know-how accumulated over 45 years. The machine performs stably while operating at ultra-high speed because we have concentrated our productivity-enhancing technology into this single model. We supply this high-end model for ultra-high-speed packaging to customers across the world. [Features and advantages] ●Achieves the industry's highest level throughput of 200 to 1,000 pouches/min. ●It is shipped equipped with a range of filling chutes to match the needs of various industries. ●Reliable sealing with long heat treatment and a long filling time allow this model to package a variety of raw materials. ●This model can be linked with peripherals to give a packaging plant solution. ●We have made available a wide variety of later-process options. * For details, please download our catalog or contact us.
Target industry: Food/Beverage Chemical Materials/Products
The T-360 offers dependable packaging speed and excellent machine durability, thanks to the simple structure with a vertical sealing bar and two sets of horizontal sealing bars. Three-dimensional pyramid-shape pouch created by reciprocal sealing operations of 2 sets of horizontal sealing bars. Reliable print-registration pitch control in film feeding by servo-controlled vertical sealing bar. Easy change of pouch length by touch-panel operation. Easy conversion to standard fin sealing pouch simply by changing horizontal sealer position. Standardly equipped with volumetric measuring device (rotary disk). Can also interlink with weigher and auger filler. * For details, please download our catalog or contact us.
Target industry: Food/Beverage Medical Supplies/Biotechnology Chemical Materials/Products
The SL series machine measures the product volume, then feeds printed film from a roll according to the print pitch, forms a pouch by heat seal, fills it with the measured product, seals the pouch and cuts it. The machine performs these operations continuously. The SL series over wrap-type sealing and fin sealing pouch forming, filling and packaging machine is suitable for powdered, granulated and pellet products. ■Original servo system ■Product memory function for added operational ease ■Line configuration ■Space-saving compact design * For details, please download our catalog or contact us.
Target industry: Food/Beverage Medical Supplies/Biotechnology Chemical Materials/Products
GD coating is possible to realize strong adhesion, covering power in accordance with by forming the reaction layer. The covering power is better than Teflon coating for releasing property, sliding property, wear resistance, and the reaction layer of dense, fine, uniform is better than Silicon for water repellency, corrosion resistance.The heatproof temperature is 350deg-C.
Target industry: Automotive Parts Semiconductors/LCD/FPD Food/Beverage
Even among other mechanical vacuum pumps able to perform compression up to atmospheric pressure, oil-sealed rotary vacuum pumps are used widely around the world as they are economical, efficient, and operable using simple equipment. Users can achieve a vacuum state using oil-sealed rotary vacuum pumps. These pumps are also combined with roots vacuum pumps to make widely-used vacuum pump units (vacuum systems) having high exhaust speeds, and are also used as roughing pumps functioning as a part of vacuum facilities. Oil-sealed rotary vacuum pumps are for a wide range of applications. They play active roles in fulfilling vacuum-related needs in areas having to do with automobiles, metals, steel,packaging, foods, medical supplies, medical treatment, electricity, electronics,semiconductors, and advanced research. 90M3/H~1800M3/H TYPE P90/P180/P222/P450/P600/P901/K30002
Target industry: Automotive Parts Food/Beverage Metallic Products/Parts
A roots vacuum pump is a vacuum pump that compresses and exhausts by ounter-rotating two-lobed rotors. This mechanical vacuum pump is also referred to as a mechanical booster when it is mounted to the front end of an oil-sealed rotary vacuum pump to increase the volume flow rate. A roots vacuum pump is normally used with a vacuum pump that can compress up to atmospheric pressure 90M3/H~12000M3/H TYPE RA100/RD302/RD600/RD1200/RD1500/RD2500/R6002/ R12001
Target industry: Automotive Parts Food/Beverage Metallic Products/Parts
Simply by driving over it, this soft gel mat removes dust and dirt from the tires of indoor heavy vehicles. LIFT-MAT® is so innovative, it can be installed without double-sided tape, and used repeatedly just by wiping it with a wet cloth. Introducing LIFT-MAT® will not only remove dust and dirt from tires, but will also improve the cleanliness of your factory floors. 1. Strong structure incorporates core materials → Able to withstand the weight of heavy vehicles 2. Easy maintenance with just wet wiping 3. Can be used repeatedly → After being wiped with a wet cloth, the mat will regain its adhesive capacity for repeated use. No operational expense. 4. Incredible dust removal rate of 99% → In swab tests, after 1000 runs over the mat, the removal rate of ATP + AMP is 99% of capacity when brand new. 5. No double-sided tape required → The natural adhesive properties of the gel helps stick the mat to the floor, with no adhesive residue remaining. A light-vehicle type, used for dust removal from the tires of light vehicles or shoes, is also available. Washable and able to be used repeatedly, LIFT-MAT® has longer durability compared to conventional peel-off mats, providing significant cost reduction. Please contact us for more details.
Target industry: Food/Beverage Semiconductors/LCD/FPD Medical Supplies/Biotechnology
Attach a tank cleaner inside the tank and just supply water. This rotating cleaning nozzle automatically cleans the insides of tanks. For any tank/CIP/container cleaning in the food, chemical, pharmaceutical, pulp and paper, steel, spinning, shipping and ceramics industries. From high-pressure cleaning for tough dirt removal to low-pressure cleaning to perform uniform spray of cleaning agents, our tank cleaner automates all kinds of dangerous and difficult cleaning. The high-pressure type employs nozzles with ceramic tips for great durability and product life.
Target industry: Industrial Machinery/Devices Medical Supplies/Biotechnology Food/Beverage
These are conveyor belts manufactured by coating the fluoroplastic to various industrial cloths and shaping them into belts for light conveyance. We have a wide range of track oriented belts designed to improve conveyor stability. The belts can be chosen from a wide variety of colors and raw material combinations by using the coat guide or pin guide or as per requirements. These belts are used in various manufacturing processes including manufacturing foods, fibers, building materials, plastics, ceramics.
Target industry: Automotive Parts Resin/Plastic/Rubber Products Food/Beverage
It is the composite made for industrial use by applying the silicon coating to the industrial cloths such as nylon, glass cloth.
Target industry: Chemical Materials/Products Industrial Machinery/Devices Food/Beverage
Sheet type composite material that is impregnated and calcining the fluoroprastic resin onto industrial fabrics such as glass fabrics and Aramid fabrics. Variety of products are available depend on the impregnation amount of fluoroplastic and the thickness of the fabrics.
Target industry: Chemical Materials/Products Semiconductors/LCD/FPD Food/Beverage
Adhesive tapes can easly give the charactertistics of the base material films by sticking them onto the object. Since our adhesive tapes are manifactured by variety of functional engineering plastics such as floroplastic, it can be expected further utilizing, even at where the tapes manifactured by general-purpose plastics were unsuitable.
Target industry: Electrical/Electronic Parts Industrial Machinery/Devices Food/Beverage
It has a higher tensile strength than ASF-110 FR by applying high strength and low elongation fluoroplastic film as the substrate.
Target industry: Chemical Materials/Products Resin/Plastic/Rubber Products Food/Beverage
Adhesive tape with a fluoroplastic impregnated glass fabric as the base material and applied a silicone adhesive on one side. There are also PE core products and released paper types.
Target industry: Semiconductors/LCD/FPD Electrical/Electronic Parts Food/Beverage
Adhesive tape with a fluoroplastic film as the basic material and applied a silicone adhesive on one side. The color is milky white, clean impression for general.There are also PE core products and peel-and-stick types. Adhesive tape with a fluoroplastic film as the basic material and applied a silicone adhesive on one side. The color is milky white, clean impression for general.There are also PE core products and peel-and-stick types.
Target industry: Semiconductors/LCD/FPD Electrical/Electronic Parts Food/Beverage
Borosilicate Glass tube made from borosilicate glass "H-32" which has low coefficient of expansion Its excellence in scientific durability and heat-resisting property make H-32 a prominent material for laboratory wares. It is proven by the examination made at material level (rod): it has very small elongation and contraction when affected by rapid heating/ cooling and it can resist 250 ℃ temperature difference shock. Our beakers are used for variety of R&D and experiment fields including physics and chemistry experiments. [Size] Outer Diameter (mm): 9±0.2 - 28±0.4 Thickness (mm): 1.0±0.10 - 2.4±0.20 * Please download catalog for more detail information.
Target industry: Medical Supplies/Biotechnology Food/Beverage Hospital/Medical/Welfare
Stopcock made from borosilicate glass "H-32" which has low coefficient of expansion Its excellence in scientific durability and heat-resisting property make H-32 a prominent material for laboratory wares. It is proven by the examination made at material level (rod): it has very small elongation and contraction when affected by rapid heating/ cooling and it can resist 250 ℃ temperature difference shock. Our beakers are used for variety of R&D and experiment fields including physics and chemistry experiments. [Size] Standard ground glass joint: common type 12/30,common type 15/35, common type 19/38,common type 22/46,K type K-11,K type K-13,K type K-16,K type K-19,K type K-22 Width(mm):32 - 50 Height (mm): 51 - 85 * Please download catalog for more detail information.
Target industry: Medical Supplies/Biotechnology Food/Beverage Hospital/Medical/Welfare
Round-bottom flask(wide neck) made from borosilicate glass "H-32" which has low coefficient of expansion Its excellence in scientific durability and heat-resisting property make H-32 a prominent material for laboratory wares. It is proven by the examination made at material level (rod): it has very small elongation and contraction when affected by rapid heating/ cooling and it can resist 250 ℃ temperature difference shock. Our beakers are used for variety of R&D and experiment fields including physics and chemistry experiments. [Size] Capacity (mL):200,300,500,1000 Neck Outer Diameter (mm): 39 - 57 Max Outer Diameter (mm): 81 - 137 Height (mm): 119 - 198 * Please download catalog for more detail information.
Target industry: Medical Supplies/Biotechnology Food/Beverage Hospital/Medical/Welfare
Round-bottom flask(nallow neck) made from borosilicate glass "H-32" which has low coefficient of expansion Its excellence in scientific durability and heat-resisting property make H-32 a prominent material for laboratory wares. It is proven by the examination made at material level (rod): it has very small elongation and contraction when affected by rapid heating/ cooling and it can resist 250 ℃ temperature difference shock. Our beakers are used for variety of R&D and experiment fields including physics and chemistry experiments. [Size] Capacity (mL):200,300,500,1000 Neck Outer Diameter (mm): 32 - 38 Max Outer Diameter (mm): 81 - 137 Height (mm): 178 - 264 * Please download catalog for more detail information.
Target industry: Medical Supplies/Biotechnology Food/Beverage Hospital/Medical/Welfare
Separatory funnel(type N) made from borosilicate glass "H-32" which has low coefficient of expansion Its excellence in scientific durability and heat-resisting property make H-32 a prominent material for laboratory wares. It is proven by the examination made at material level (rod): it has very small elongation and contraction when affected by rapid heating/ cooling and it can resist 250 ℃ temperature difference shock. Our beakers are used for variety of R&D and experiment fields including physics and chemistry experiments. [Size] Capacity (mL):100,200,300,500,1000 Neck Outer Diameter (mm): 28 - 52 Max Outer Diameter (mm): 66 - 132 Effective Height (mm): 82 - 170 * Please download catalog for more detail information.
Target industry: Medical Supplies/Biotechnology Food/Beverage Hospital/Medical/Welfare
Kjeldahl flask(type N) made from borosilicate glass "H-32" which has low coefficient of expansion Its excellence in scientific durability and heat-resisting property make H-32 a prominent material for laboratory wares. It is proven by the examination made at material level (rod): it has very small elongation and contraction when affected by rapid heating/ cooling and it can resist 250 ℃ temperature difference shock. Our beakers are used for variety of R&D and experiment fields including physics and chemistry experiments. [Size] Capacity (mL):50,100,200,300,500,1000 Neck Outer Diameter (mm): 26 - 43 Max Outer Diameter (mm): 50 - 133 Effective Height (mm): 116 - 280 * Please download catalog for more detail information.
Target industry: Medical Supplies/Biotechnology Food/Beverage Hospital/Medical/Welfare
Erlenmeyer flask made from borosilicate glass "H-32" which has low coefficient of expansion Its excellence in scientific durability and heat-resisting property make H-32 a prominent material for laboratory wares. It is proven by the examination made at material level (rod): it has very small elongation and contraction when affected by rapid heating/ cooling and it can resist 250 ℃ temperature difference shock. Our beakers are used for variety of R&D and experiment fields including physics and chemistry experiments. [Size] Capacity (mL):10,20,30,50,100,200,300,500,1000,2000,3000,5000 Mouth inside Diameter (mm): 13 - 52 Max Outer Diameter (mm): 30 - 234 Height (mm): 50 - 330 * Please download catalog for more detail information.
Target industry: Medical Supplies/Biotechnology Food/Beverage Hospital/Medical/Welfare
Conical Beaker made from borosilicate glass "H-32" which has low coefficient of expansion Its excellence in scientific durability and heat-resisting property make H-32 a prominent material for laboratory wares. It is proven by the examination made at material level (rod): it has very small elongation and contraction when affected by rapid heating/ cooling and it can resist 250 ℃ temperature difference shock. Our beakers are used for variety of R&D and experiment fields including physics and chemistry experiments. [Size] Capacity (mL): 50,100,200,300,500,1000,2000 Min Outer Diameter (mm): 32 - 96 Max Outer Diameter (mm): 50 - 150 Height (mm): 71 - 230 * Please download catalog for more detail information.
Target industry: Medical Supplies/Biotechnology Food/Beverage Hospital/Medical/Welfare
Tall Beaker made from borosilicate glass "H-32" which has low coefficient of expansion Its excellence in scientific durability and heat-resisting property make H-32 a prominent material for laboratory wares. It is proven by the examination made at material level (rod): it has very small elongation and contraction when affected by rapid heating/ cooling and it can resist 250 ℃ temperature difference shock. Our beakers are used for variety of R&D and experiment fields including physics and chemistry experiments. [Size] Capacity (mL): 50,100,200,300,500,1000,2000 Outer Diameter (mm): 44 - 135 Height (mm): 75 - 300 * Please download catalog for more detail information.
Target industry: Medical Supplies/Biotechnology Food/Beverage Hospital/Medical/Welfare
Beaker made from borosilicate glass "H-32" which has low coefficient of expansion Its excellence in scientific durability and heat-resisting property make H-32 a prominent material for laboratory wares. It is proven by the examination made at material level (rod): it has very small elongation and contraction when affected by rapid heating/ cooling and it can resist 250 ℃ temperature difference shock. Our beakers are used for variety of R&D and experiment fields including physics and chemistry experiments. [Size] Capacity (mL): 10,20,30,50,100,200,300,500,1000,2000,3000,5000,10000 Outer Diameter (mm): 30 - 230 Height (mm): 40 - 360 * Please download catalog for more detail information.
Target industry: Medical Supplies/Biotechnology Food/Beverage Hospital/Medical/Welfare
Punch Industry Co., Ltd. manufactures the maintenance parts and new parts for components of preform mold, hot runner. We manufacture the components of preform molds used to make the PET bottle and package, and components of hot runner. We have many performance records of improving the quality and parts repairing. If there is any problem of forming or mold/die parts, please let us help.
Target industry: Machine Parts Metallic Products/Parts Food/Beverage
Improvement of wear resistance, durability, product quality Punch Industry's coating/surface treatment. Punch Industry Co., Ltd. offers the various coating/surface treatment. We provide not only TiCN, TiN, DLC, Hard chrome plating but also New DLC-1, New DLC-2, and F coating as well. Those coating contribute to improving production performance in mold/die.
Target industry: Automotive/Transport Machinery Metallic Products/Parts Food/Beverage
Our HYBRID TOYOSILICONE HOSE features heat resistance up to 130 °C, making it suitable for the food industry. Doesn’t collapse or break easily and it’s ideal for installation in cramped areas. This pressure-resistant hose is made of silicone rubber and is able to handle pressure and vacuum feeds. It has the excellent features of silicone, such as heat resistance up to 130° C, low leaching, insulation, and no odor. It can be used in equipment for the food and beverage industry, semiconductor production, industrial furnace manufacturing and more. Because of its special, heat-resistant resin coil, the HYBRID TOYOSILICONE HOSE achieves higher resistance to rust. It is well suited for narrow spaces thanks to its added flexibility.
Target industry: Metallic Products/Parts Machine Parts Food/Beverage
The TOYOSILICONE HOSE is excellent for handling high and low temperatures of -30 °C to 150 °C, making it Ideal for use in food handling including fat. FDA-compliant with a wide variety of couplings and fastening couplings.
Target industry: Chemical Materials/Products Medical Supplies/Biotechnology Food/Beverage
The TOYORING-F HOSE is made of PVC hose that doesn’t use phthalate plasticizer. It complies with the Food Sanitation Act in Japan and is safe for use. Its high collapse-resistance is ideal for vacuum feeds. The TOYORING-F HOSE uses resin reinforcement, which guarantees no rust and allows hygienic operation. The hose can be cut just with scissors. Other features include resistance to oil, which ensures durability, high transparency and great flexibility. Couplings that prevent liquid leaks and hose disconnections are also available.
Target industry: Chemical Materials/Products Medical Supplies/Biotechnology Food/Beverage
The TOYOFOODS-S HOSE is made of PVC hose that doesn’t use phthalate plasticizer. It complies with the Food Sanitation Act in Japan and is safe for use. Its high collapse-resistance is ideal for vacuum feeds. Other features include oil-resistance, which ensures durability, high transparency and extra flexibility. Couplings that prevent liquid leaks and hose disconnections are also available.
Target industry: Chemical Materials/Products Medical Supplies/Biotechnology Food/Beverage
The TOYOFOODS HOSE is made of PVC hose that doesn’t use phthalate plasticizer. It complies with the Food Sanitation Act in Japan and is safe for use. Other features include oil-resistance, which ensures durability, high transparency and extra flexibility. Couplings that prevent liquid leaks and hose disconnections are also available.
Target industry: Chemical Materials/Products Medical Supplies/Biotechnology Food/Beverage
The heat-resistant TOYOSILICONE-P HOSE is ideal for vacuum and pressure food feeds. It is fully compliant with Japanese FSA (Public Notice Nos. 52 and 595 of the Food Sanitation Act) and U.S. FDA (Food and Drug Administration), ensuring safe use. Hygienic operation with rust-free resin reinforcement. It also features excellent heat- resistance of up to 100° C and is highly collapse resistance. A wide variety of tightening couplings is also available.
Target industry: Chemical Materials/Products Medical Supplies/Biotechnology Food/Beverage
Heat-resistant TOYOSILICONE-S2 HOSE is ideal for vacuum and pressure food feeds. It is fully compliant with Japanese FSA (Public Notice Nos. 52 and 595 of the Food Sanitation Act) and U.S. FDA (Food and Drug Administration), ensuring safe use. It also features excellent heat-resistance of up to 150° C and is higher collapse-resistance than TOYOSILICONE-S HOSE. A wide variety of tightening couplings is also available.
Target industry: Chemical Materials/Products Medical Supplies/Biotechnology Food/Beverage
Heat-resistant TOYOSILICONE-S HOSE is ideal for vacuum and pressure food feeds. It is fully compliant with Japanese FSA (Public Notice Nos. 52 and 595 of the Food Sanitation Act) and U.S. FDA (Food and Drug Administration), ensuring safe use. It also features excellent heat- resistance of up to 150° C and is highly collapse-resistant. A wide variety of tightening couplings is also available.
Target industry: Chemical Materials/Products Medical Supplies/Biotechnology Food/Beverage
GP-C7 has been created to the highest standards. To meet the varied requirements of our customers, the knowledge and expertise of General Packer has been concentrated, resulting in this machine that offers quality, low cost, safety and ease of operation. It has a production capacity of a maximum of 160 single bags/minute.
Target industry: Medical Supplies/Biotechnology Consumer Products Food/Beverage
Automatic rotary type packaging machine for forming small bags that enables high-speed packaging of 120 bags/minute.
Target industry: Machine Parts Consumer Products Food/Beverage
The world’s first multi-purpose automatic bag feed packaging machine suitable for gusset bags, free-standing bags and those with zippers.
Target industry: Machine Parts Consumer Products Food/Beverage
With hundreds of ready-made bags stocked in its bag supply unit (magazine), this machine can automatically supply, open, fill, seal and then discharge each bag. It is the leading general-purpose automatic bag feed packaging machine, one that can accommodate a variety of bag types. The 【UR】 model is equipped with a bag feed conveyor device for use with zippered bags. The 【USR】 model is equipped with a bottom-opening device that works with free-standing zippered pouches. It features a conveyor type bag feed system. The 【UST】 model offers a zipper opening/closing device for use with standing pouches with zippers. The 【GY】 model is equipped with a horizontal bag feeding device for use with three- and four-sided sealing bags. The 【B】 model features a bag-forming device made of tube film.
Target industry: Machine Parts Consumer Products Food/Beverage
This machine automatically feeds ready-made bags (via a bag stocker) to receive products such as confectionery, powder, etc., and then seal the packages. This type is for small-volume production. Our motto is “safe and sanitary” innovative packing machines.
Target industry: Medical Supplies/Biotechnology Consumer Products Food/Beverage
This packaging machine can produce bags one-by-one using sheet or tube-shaped packages (bag forming function). It can also automatically open, fill, seal and then discharge packaging.
Target industry: Food/Beverage
An automatic bag feed packaging machine equipped with a single rotary gas filling system, allowing fresh and quick packaging. Permits gas replacement packaging for food and pet food, etc.
Target industry: Consumer Products Food/Beverage
A very versatile model suitable for middle-sized bags (bag width from 140mm to 320mm). The 【LR】 model is equipped with a bag feed conveyor device that works with zippered bags. The 【LY】 model features a horizontal bag feed device suited to both three- and four-sided sealing bags. The 【LYC】 model is a combination of both LR and LY machines.
Target industry: Medical Supplies/Biotechnology Consumer Products Food/Beverage
Attention to raw material costs has resulted in a lower price. 5200 Model: net filling method 5300 Model: compensation filling method
Target industry: Machine Parts Consumer Products Food/Beverage