Japan Products and services

Asia wide Manufacturing Business Platform in Philippines

TECH DIRECTORY Philippines

Japan

Location

Filters
New
Product categories

All From 691 1 - 80 items are displayed

  • Industrial ATX Motherboard Intel 8th/9th Gen. Core (Coffee Lake-S/Coffee Lake Refresh-S) + C246 (LGA1151) Chipset Industrial ATX Motherboard Intel 8th/9th Gen. Core (Coffee Lake-S/Coffee Lake Refresh-S) + C246 (LGA1151) Chipset
    • NEW
    • Catalogue
    • Distributor required
    • Partnership required

    - Supports Intel 8th / 9th Gen. Core Desktop Processors (LGA1151) - Up to 64 GB in 4 slots 288-pin UDIMM sockets. Supports dual channel DDR4 2400/2666 MHz ECC SDRAM - 1 x PCIe X 16, 3 x PCIe X 4 + 3 x PCI slot - 6 x SATA 3.0 (6Gb/s) ports and 12 x USB Ports - Dual Giga LAN port with intel I219LM and intel I210AT - VGA + HDMI+ Display port by I/O panel

    Target industry: Automotive/Transport Machinery Semiconductors/LCD/FPD Measurement/Analytical Instruments

    Contec Co., Ltd.

  • Industrial ATX Motherboard Intel 8th/9th Gen. Core (Coffee Lake-S/Coffee Lake Refresh-S) + Q370 (LGA1151) Chipset Industrial ATX Motherboard Intel 8th/9th Gen. Core (Coffee Lake-S/Coffee Lake Refresh-S) + Q370 (LGA1151) Chipset
    • NEW
    • Catalogue
    • Distributor required
    • Partnership required

    - Supports Intel 8th / 9th Gen. Core Desktop Processors (LGA1151) - Up to 64 GB in 4 slots 288-pin UDIMM sockets. Supports dual channel DDR4 2400/2666 MHz ECC SDRAM - 1 x PCIe X 16, 3 x PCIe X 4 + 3 x PCI slot - Six SATA 3.0 (6Gb/s) ports and Twelve USB Ports - Dual Giga LAN port with intel I219LM and intel I211AT - VGA + HDMI+ Display port by I/O panel

    Target industry: Automotive/Transport Machinery Semiconductors/LCD/FPD Measurement/Analytical Instruments

    Contec Co., Ltd.

  • 15" Touch Panel Computer PT-S3000HX series 15" Touch Panel Computer PT-S3000HX series
    • NEW
    • Catalogue
    • Distributor required
    • Partnership required

    This product is a fanless high-performance embedded-type 15" touch panel computer that is equipped with Intel 6th Gen. Core i (SkyLake) processor. CPU can be selected from Core i7-6700TE, Core i5-6500TE or Celeron G3900TE. This product has IP65 grade dust and water-proof in front. Along with its power-saving and high-performance features, this product has a rich variety of interfaces and achieves fanless operation by way of natural air-cooling. Various interfaces such as dual LAN / USB3.0 / DisplayPort / DVI-I / RS-232C, and 2x 2.5 inches SATA disk bays unit are installed. PT-S3000HX series employs 5-wire resistive type touch screen. Since embedded type CPU has been adopted, the use of readily available parts ensures the product to be applied easily.

    Target industry: Automotive/Transport Machinery Semiconductors/LCD/FPD Measurement/Analytical Instruments

    Contec Co., Ltd.

  • 15" Touch Panel Computer PT-S2000HX series 15" Touch Panel Computer PT-S2000HX series
    • NEW
    • Catalogue
    • Distributor required
    • Partnership required

    This product is a fanless high-performance embedded-type 15" touch panel computer that is equipped with Intel 6th Gen. Core i (SkyLake) processor. CPU can be selected from Core i5-6300U or Celeron 3955U. This product has IP65 grade dust and water-proof in front. Along with its power-saving and high-performance features, this product has a rich variety of interfaces and achieves fanless operation by way of natural air-cooling. Various interfaces such as dual LAN / USB3.0 / DisplayPort / HDMI / RS-232C, and 2.5 inches SATA disk bay unit are installed. PT-S2000LX series employs 5-wire resistive type or projected capacitive (PCAP) type touch screen. Since embedded type CPU has been adopted, the use of readily available parts ensures the product to be applied easily.

    Target industry: Automotive/Transport Machinery Semiconductors/LCD/FPD Measurement/Analytical Instruments

    Contec Co., Ltd.

  • Built-in preamp microphone “TYPE 4158N (TYPE1)” Built-in preamp microphone “TYPE 4158N (TYPE1)”

    The “TYPE4158N” is a free-field 1/4-inch microphone with frequencies of 20Hz to 100 kHz. Sound pressure sensitivity including the preamp is -50 dB ±3 dB re 1V/Pa (3.2 mV/Pa). Since this microphone is compact, impact caused by reflection or diffraction is minimal, and its sound pressure sensitivity is 3.2 mV/Pa. Thus, it’s also suitable for measurement with loud sound pressure. Since this product is IEPE compatible, it can be connected directly to devices supplying constant current, such as FFT analyzers or AD converters. [Features] •With a BNC cable, connects directly to analytic devices such as FFT analyzers •Low-cost measurement with great accuracy •Long-term stability assured by applying pre-aging process of heating it to a high temperature of 360°C * For details, please click the external link below or feel free to contact us.

    Target industry: Measurement/Analytical Instruments

    Aco Co., Ltd.

  • Built-in preamp microphone “TYPE 4160N (TYPE 2)” Built-in preamp microphone “TYPE 4160N (TYPE 2)”

    The “TYPE 4160N” is a free-field 1/4-inch microphone with frequencies of 20Hz to 20 kHz. Sound pressure sensitivity including the preamp is -44 dB ±3 dB re 1V/Pa (6.3 mV/Pa). Since this product is IEPE compatible, it can be connected directly to devices supplying constant current, such as FFT analyzers or AD converters. Low cost and ideal for multi-channel measurement. [Features] •With a BNC cable, connects directly to analytic devices such as FFT analyzers •Low-cost measurement with great accuracy •Long-term stability assured by applying pre-aging process of heating it to a high temperature of 360°C * For details, please click the external link below or feel free to contact us.

    Target industry: Measurement/Analytical Instruments

    Aco Co., Ltd.

  • Built-in preamp microphone “TYPE 7152N (TYPE 1)” Built-in preamp microphone “TYPE 7152N (TYPE 1)”

    The “TYPE7152N” is a free-field 1/2-inch microphone with frequencies of 20 Hz to 20 kHz. Sound pressure sensitivity including the preamp is -31 dB ±1 dB re 1V/Pa (28.1 mV/Pa). Since this product is IEPE compatible, it can be connected directly to devices supplying constant current, such as FFT analyzers or AD converters. [Features] •With a BNC cable, connects directly to analytic devices such as FFT analyzers •Low-cost measurement with great accuracy •Long-term stability assured by applying pre-aging process of heating it to a high temperature of 360°C * For details, please click the external link below or feel free to contact us.

    Target industry: Measurement/Analytical Instruments

    Aco Co., Ltd.

  • Built-in preamp microphone “TYPE 7146N (TYPE 1)” Built-in preamp microphone “TYPE 7146N (TYPE 1)”

    The “TYPE 7146N” is a free-field 1/2-inch microphone with frequencies of 20Hz to 20 kHz. Sound pressure sensitivity including the preamp is -27 dB ±2 dB re 1V/Pa (44.7 mV/Pa). Since this product is IEPE compatible, it can be connected directly to devices supplying constant current, such as FFT analyzers or AD converters. [Features] •With a BNC cable, connects directly to analytic devices such as FFT analyzers •Low-cost measurement with great accuracy •Long-term stability assured by applying pre-aging process of heating it to a high temperature of 360°C * For details, please click the external link below or feel free to contact us.

    Target industry: Measurement/Analytical Instruments

    Aco Co., Ltd.

  • Sound source visualization device “TYPE 8820” Sound source visualization device “TYPE 8820”
    • Catalogue

    The sound source visualization device “TYPE 8820” visualizes sound in order to clearly, quickly and efficiently locate a sound source. Using an augmented reality method with a camera set up in the middle of a microphone array, sound levels are measured and displayed as contours, with overlaid actual images. The augmented reality method allows visualization of a wide range of sound frequencies with the images captured by a camera situated in the middle of the device. [Features] • Quickly locates and efficiently displays on a PC noise sources using captured images • A wide range of frequencies can be covered with just a small microphone array • Using our unique adjustable microphone array, locating noise sources of low to high frequencies can be done using a single device • Identifies the frequencies of noise sources as well as various other properties, such as the timing of the noise generation * For details, please download our PDF documents or feel free to contact us.

    Target industry: Measurement/Analytical Instruments Other

    Aco Co., Ltd.

  • 2-channel AD converter "ACO DAQ (TYPE 8835)" 2-channel AD converter "ACO DAQ (TYPE 8835)"
    • Catalogue

    The ACO DAQ (TYPE 8835) is a compact, lightweight 2-channel AD converter for sound recording and analysis. Windows system recognizes the product as a USB audio codec device when connected through the USB interface, making setup easy without any driver installation. You can then use standard recorders or measurement software. [Features] • Real-time sound and vibration AD conversion • 2-channel, 24-bit and 48kHz, samplings • Bus-powered USB: compact design for outdoor use • USB interface: connects to PC for data management and analysis • Suitable for various types of inspection and analysis of automobile and construction machinery • Built-in preamplifier, can be connected to IEPE sensors • Windows compatible * For details, please download our catalogs or feel free to contact us.

    Target industry: Consumer Electrical Appliances Information/Communication Devices Machine Parts

    Aco Co., Ltd.

  • Vibration calibrator “TYPE 2110” Vibration calibrator “TYPE 2110”
    • Catalogue

    The “TYPE 2110” is a vibration level calibrator for maintenance management. With this product, vibration calibration compliant with “JIS C 1510:1995 - Vibration level meters” on intensively used instruments can be done effortlessly with great accuracy. Switching between different commercial power supply frequencies (50Hz and 60Hz) is easy, allowing calibration on site. Used with a pic-up holder, you can also conduct horizontal calibration. [Features] • High-accuracy inspection and calibration • Horizontal calibration is possible • Compliant with “JIS C 1510:1995 - Vibration level meters” * For details, please download our catalogs or feel free to contact us.

    Target industry: Measurement/Analytical Instruments Industrial Machinery/Devices Industrial Electrical/Control Equipment

    Aco Co., Ltd.

  • Dummy head “SAMURAI HATS” Dummy head “SAMURAI HATS”
    • Catalogue

    The “SAMURAI HATS” is an ANSI and IEC compliant dummy head, which can take acoustic measurements with consideration of the diffraction or reflection near ears, which is caused by the upper body and head. The microphone is omnidirectional and suitable for ambience recording which is remarkably similar to the actual sounds entering our ears (binaural recording). You can conduct high-precision acoustic analyses, such as quality evaluation of headphones/earphones, vehicle interior noise level measurement, and architectural acoustics measurement. [Features] • Head only (Dummy Head) or with upper body (HATS) • Built-in ear simulator (for both ears)  (Including IEPE (constant current) and 2CH power supply) • Can be connected to various audio measuring instruments * For details, please download our catalogs or feel free to contact us.

    Target industry: Measurement/Analytical Instruments Industrial Electrical/Control Equipment Other Manufacturing

    Aco Co., Ltd.

  • All-weather windscreen “NA-0303” All-weather windscreen “NA-0303”
    • Catalogue

    Durable all-weather windscreen with wind noise reduction and waterproof (rain and snow) features [Components] •Windscreen (Φ200): 1 •Microphone cover (waterproof fluorine sheet): 1 •Metal fitting for microphone: 1 •Metal fitting for tripod: 1 •Extension cable (waterproof connector) 0.5m BC-0046A: 1 * Connection cable between the screen and the sound level meter is not included. * For details, please feel free to contact us.

    Target industry: Chemical Materials/Products Garments/Textiles Food/Beverage

    Aco Co., Ltd.

  • Waterproof standard sound level meter "TYPE 6226NW" Waterproof standard sound level meter "TYPE 6226NW"
    • Catalogue

    Aco’s latest waterproof sound level meter TYPE 6226NW uses a newly developed special waterproof technology. A connection cable is included. This product was designed to be used both indoors and outdoors, where rain, water splash and humidity are expected, for comfortable outdoor sound level measurement even when it’s raining. * For details, please download our catalogs or feel free to contact us.

    Target industry: Chemical Materials/Products Garments/Textiles Food/Beverage

    Aco Co., Ltd.

  • Calibrator “TYPE 2124A” Calibrator “TYPE 2124A”
    • Catalogue

    The TYPE 2124A is a standard model sound level calibrator which emits tone of frequency 250Hz and sound pressure of 124dB. * For details, please feel free to contact us.

    Target industry: Chemical Materials/Products Garments/Textiles Food/Beverage

    Aco Co., Ltd.

  • Sound level meter "TYPE 6236 / 6238" Sound level meter "TYPE 6236 / 6238"
    • Catalogue

    Functionality, such as various evaluation values for environmental measurement assessment, can be easily expanded by inserting optional analytic program cards into the card slot. [Features] •Built-in NC value display function •Functionality extension with program (SD) cards •With built-in timer, start and stop times can be programmed * For details, please download our catalogs or feel free to contact us.

    Target industry: Machine Parts Industrial Machinery/Devices Industrial Electrical/Control Equipment

    Aco Co., Ltd.

  • Integrating sound level meter "TYPE 6230 ACCURA" Integrating sound level meter "TYPE 6230 ACCURA"
    • Catalogue

    The ACCURA is a low-cost, compact and easy-to-operate sound level meter designed for everyday use. This quality sound level meter, which conforms to various measurement acts, is suitable for general households, schools, or laboratories and factories where accuracy is critical. [Features] •Compact design at low cost, yet conforms to various measurement acts such as JIS and IEC •Compact design, pocket-sized •Easy operation, like using a smartphone, without requiring any special training or skills •Measures Equivalent Continuous Sound Pressure Level (Leq), allowing environmental noise measurement for occupational health. •LCD monitor with a backlight * For details, please download our catalogs or feel free to contact us.

    Target industry: Machine Parts Industrial Machinery/Devices Industrial Electrical/Control Equipment

    Aco Co., Ltd.

  • Integrating sound level meter "TYPE 6224/6226" Integrating sound level meter "TYPE 6224/6226"
    • Catalogue

    The TYPE 6224/6226 is a compact, lightweight, easy-to-use and cost-effective sound level meter. This sound level meter measures Equivalent Continuous Sound Pressure Level (Leq), Sound Exposure Level (Le) and Percentile Noise Level (Lx), making it ideal for environmental noise measurement. With a wide range of functions and easy operation, it’s perfect for noise level measurement of vehicles, aircrafts and factories, as well as quality control and various testing applications. The RS-232C interface comes standard, making it connectable to an external CPU to conduct continuous measurement. [Features] •Percentile Noise Level (Lx) - any 5 random values •Equivalent Continuous Sound Pressure Level (Leq) measurement  ⇒ Environmental noise measurement required for occupational health •Wide linearity range of 100dB •With RS-232C interface, data can be processed on a PC •With built-in memory, up to 10,000 records can be stored * For details, please download our catalogs or feel free to contact us.

    Target industry: Machine Parts Industrial Electrical/Control Equipment Industrial Machinery/Devices

    Aco Co., Ltd.

  • Vibration level meter "TYPE 3233" Vibration level meter "TYPE 3233"
    • Catalogue

    The "TYPE 3233" conforms to the Measurement Act JIS C 1510:1955. A compact and lightweight vibration level meter is so powerful that it can be used at any measuring site. Used together with a vibration pickup "TYPE 7833", you can measure vibration and acceleration levels of ground, floors and seats simultaneously in 3 directions, X, Y and Z axis. Measurements and calculations made possible with this product are vibration velocity level (Lv), vibration acceleration level (Lva), equivalent continuous sound pressure level (Leq), maximum sound level (Lmax), minimum sound level (Lmin) and percentile noise level (Lx). Measurements are digitally displayed on an LCD screen. [Features] •Compact and lightweight, easy to hold •On a large LCD screen with backlight, the measured values and bar graphs are digitally displayed •Wide range linearity of 75dB, no switching required •Maximum, minimum, percentile noise and equivalent continuous sound pressure levels are simultaneously calculated in 3 dimensions and selectively displayed •Built-in RS-232C interface * For details, please download our catalogs or feel free to contact us.

    Target industry: Industrial Machinery/Devices Iron and steel industry/Metal material Food/Beverage

    Aco Co., Ltd.

  • Compact vibration level meter “TYPE 3116” Compact vibration level meter “TYPE 3116”
    • Catalogue

    The “Type 3116” is compact, no bigger than your mobile phone. Like a doctor for our industry, a stethoscope or headphone can be attached (optional) to measure vibration levels with great accuracy. Just like creating medical records for health care management, data is collected and used for control and maintenance of your facilities. With data holding function, screen reading becomes even easier. [Features] •Like using a stethoscope, you can pinpoint vibration measurement in narrow areas •Only 130g and compact design, it can be carried on business trips or use on-site •Small-bodied like a mobile phone, it allows one-hand operation •With its built-in memory, up to 256 records can be stored •Built-in serial interface allows data processing on a PC * For details, please download our catalogs or feel free to contact us.

    Target industry: Machine Parts Industrial Machinery/Devices Industrial Electrical/Control Equipment

    Aco Co., Ltd.

  • Acoustic calibrator “TYPE 2127” Acoustic calibrator “TYPE 2127”
    • Catalogue

    The “TYPE 2127” is a small, lightweight and easy-to-use audio calibrator with a feedback regulation loop. This product is compliant with JIS C 1515:2004 Class 1 and IEC60942: 2003 Class 1, which employs a reliable condenser microphone as its control sensor. With an added temperature correction function, sound generation is strictly managed in real time, resulting in fewer errors caused by atmospheric pressure changes or incorrect microphone setup. [Features] •Sound generation control: highly accurate feedback regulation loop with temperature correction function •Conformity standards: JIS C 1515:2004 Class 1 and IEC 60942:2003 Class 1 •Target calibration devices: with dedicated adapter, 1 or ½ inch microphones or sound level meters •Nominal sound pressure/frequency levels: 94dB/1000Hz •Weak battery indicator: LED flashing and no sound generation will act as a warning to avoid mismeasurement * For details, please download our catalogs or feel free to contact us.

    Target industry: Semiconductors/LCD/FPD Electrical/Electronic Parts Machine Parts

    Aco Co., Ltd.

  • Measurement act precision sound level meter/Low frequency sound pressure level meter "TYPE 6238L" Measurement act precision sound level meter/Low frequency sound pressure level meter "TYPE 6238L"
    • Catalogue

    Just one for two. This product measures both sound level and low frequency sound pressure levels by simply inserting an SD card. The “Low frequency sound pressure level meter TYPE 6238L” measures the G-weighted sound pressure level and analyzes the 1/3 octave band time, by just inserting a G-card into the SD card slot. It is a high-performance and truly reliable sound level meter for the next generation. The “Measurement act precision sound level meter TYPE 6238L” can easily extend the functionality of different evaluation values by means of optional analytic program cards inserted into the card slot. [Features] •Built-in memory function •A wide range of program cards available •Outdoor measurement with high accuracy •Reduces wind noise and improves water resistance and acoustic transmission * For details, please download our catalogs or feel free to contact us.

    Target industry: Measurement/Analytical Instruments Industrial Machinery/Devices Construction

    Aco Co., Ltd.

  • Miyako Printing Ink Co., Ltd Corporate Profile Miyako Printing Ink Co., Ltd Corporate Profile
    • Catalogue

    Established in Osaka, Japan, in 1948, Miyako Printing Ink Co., Ltd has over 50 years’ experience in ink manufacturing and distribution. To ensure product quality, we have enhanced our corporate structure, and we were granted ISO 9001 certification in December 2000. We have also set up a “Quality Assurance” section solely committed to providing quality products. [Business Areas] • Manufacture, sales and export of printing inks and materials • Distribution of printing peripherals * For details, please download our PDF documents or feel free to contact us.

    Target industry: Printing/Photoengraving/Binding

    Miyako Pinting Ink Co.,Ltd

  • Low-odor and antibacterial ink for offset printing "Niowana Ink" Low-odor and antibacterial ink for offset printing "Niowana Ink"

    “Niowana Ink” is made from carefully chosen low-vapor raw materials to reduce ink odor itself. In addition, the unpleasant odor generated during the ink drying process is abated by a special adsorbent. The odor from printed materials is reduced. A safe-to-use antibacterial agent contained in the ink helps to build up an effective antibacterial effect on the printed surface. This product is certified by the Society of International Sustaining Growth for Antimicrobial Articles (SIAA) in Japan. You can perform value-added printing without any modification of your existing printing facilities.

    Target industry: Food/Beverage Printing/Photoengraving/Binding Medical Supplies/Biotechnology

    Miyako Pinting Ink Co.,Ltd

  • Low-odor printing ink suitable for wrapping paper Low-odor printing ink suitable for wrapping paper
    • Catalogue

    • I smell the ink when opening confectionary packaging • Ink odor comes from the wrappers of sweets • Hot food makes the ink odor of packaging worse Three major causes of printing ink odor: • Organic pigments or resins • Vegetable oil • Vapors generated during the ink drying process After printing, wrappers or packaging materials are stored in stacks, which results in odors accumulating and persisting. We have developed a special printing ink for food wrappers and packaging to resolve such odor problems. Our “Niowana Ink ®” utilizes a special adsorbent to control ink odor. Compared to conventional printing inks, these printing qualities are reliably maintained. • Color reproducibility • Drying speed • Printability In addition, by blending in silver ions, the ink gains antibacterial properties. This ink is SIAA certified, and the SIAA certification mark can be used on your printed materials.

    Target industry: Printing/Photoengraving/Binding Food/Beverage

    Miyako Pinting Ink Co.,Ltd

  • Antibacterial and low-odor printing ink Ink properties, process colors, SIAA certified Antibacterial and low-odor printing ink Ink properties, process colors, SIAA certified
    • Catalogue

    The ink contains a special ink adsorbent to reduce the odor of printing ink. This product is manufactured with various ink properties and process colors, making it ideal for food wrappers and packaging. In addition, by blending in silver ions, the ink gains antibacterial properties. This ink is SIAA certified, and the SIAA certification mark can be used on your printed materials. We offer free color samples to interested customers. We formulate inks for free trials based on the specs of the printing facilities.

    Target industry: Printing/Photoengraving/Binding Food/Beverage

    Miyako Pinting Ink Co.,Ltd

  • Antibacterial printing ink for paper packaging of cosmetics Antibacterial printing ink for paper packaging of cosmetics

    We manufacture low-odor printing inks with antibacterial properties for paper packaging of cosmetics. This product is the industry’s first SIAA (the Society of International Sustaining Growth for Antimicrobial Articles) certified printing ink in Japan. With silver ions blended in, the ink can provide an antibacterial effect on printed surfaces. Furthermore, with an added special adsorbent, ink odor is also controlled. You can provide safe products to your customers with our antibacterial and low-odor printing inks. This product is widely used in printing on packaging and wrappers in the food industry.

    Target industry: Printing/Photoengraving/Binding Food/Beverage

    Miyako Pinting Ink Co.,Ltd

  • Antibacterial printing ink for paper packaging of food Antibacterial printing ink for paper packaging of food
    • Catalogue

    This product is the industry’s first SIAA (the Society of International Sustaining Growth for Antimicrobial Articles) certified printing ink in Japan. By blending in silver ions, we developed this ink with antibacterial properties. It is ideal for printing of food wrappers or packaging, where hygiene is paramount. In addition, with an added special adsorbent, the major causes of ink odor are also suppressed. • Organic pigments and resins • Vegetable oil • Vapors generated during the ink drying process You can provide safe products to your customers with our antibacterial and low-odor printing inks. Our inks are manufactured at an ISO 9001 certified factory. Inks with various properties, process colors and varnishes are available. Printing qualities such as color reproduction, drying speed and printability are reliably maintained. We have expertise in setting up inks to any printing machines or facilities. Since no special facilities are required, you can utilize our antibacterial ink with your contracted printing company.

    Target industry: Printing/Photoengraving/Binding Food/Beverage

    Miyako Pinting Ink Co.,Ltd

  • Resolves the issues of unpleasant-smelling wrapping paper! [Niowana Ink] Resolves the issues of unpleasant-smelling wrapping paper! [Niowana Ink]
    • Catalogue

    “Niowana Ink(R)” is made from carefully chosen low-vapor raw materials to reduce ink odor itself. Furthermore, an added special deodorant component breaks down and absorbs vapors generated by printed materials to reduce the odor of printed materials. We use an adsorption type deodorant, making our low-odor ink environmentally friendly. The added special adsorbent controls odors effectively, while maintaining the basic characteristics of the ink, such as color reproducibility and dryability. We have successfully reduced the cumulative amount of odor. A sensory analysis of printed materials shows this product scored an odor rate a point lower than other similar products. [Features] • Maintains basic characteristics of ink • A special adsorbent is blended in • Significant reduction of accumulated odor • Fewer ink vapors, odor generated during ink drying is controlled • Reliably maintained color reproducibility, dryability and printability * For details, please download our PDF documents or feel free to contact us.

    Target industry: Printing/Photoengraving/Binding

    Miyako Pinting Ink Co.,Ltd

  • Antibacterial and low-odor printing for stickers and labels for food Antibacterial and low-odor printing for stickers and labels for food
    • Catalogue

    “Niowana Ink” has been developed to control ink odor and boost antibacterial effect. It enhances the safety of packaging and printed labels for food, food supplements and cosmetics. This ink is SIAA certified, and the SIAA certification mark can be used on your printed materials. This ink is also suitable for color or special printing. • Control odors from organic pigments and resins • Control odors from vegetable oil • Control vapors generated during the ink drying process • SIAA certified

    Target industry: Food/Beverage Printing/Photoengraving/Binding

    Miyako Pinting Ink Co.,Ltd

  • Antibacterial printing: food wrappers and packaging, effective for reducing printing odor Antibacterial printing: food wrappers and packaging, effective for reducing printing odor
    • Catalogue

    Why don’t you try antibacterial printing on the wrappers and packaging of your pharmaceutical, food supplement and cosmetics products? Our proprietary printing ink is certified by the SIAA (the Society of International Sustaining Growth for Antimicrobial Articles). With silver ions blended in, the ink can provide an antibacterial effect on printed surfaces. Furthermore, with an added special adsorbent, ink odor is also controlled. The following major causes of ink odor are also suppressed. • Organic pigments and resins • Vegetable oil • Vapors generated during the ink drying process This product is widely used for wrappers and packaging in the food industry. We can supply our inks directly to your contracted printing company. You can also print the SIAA certification mark on your wrappers and packaging. For details, please download our antibacterial ink introduction guidebook.

    Target industry: Food/Beverage Printing/Photoengraving/Binding

    Miyako Pinting Ink Co.,Ltd

  • [Antibacterial Printing] Antibacterial and low-odor printing for better hygiene practice [Antibacterial Printing] Antibacterial and low-odor printing for better hygiene practice
    • Catalogue

    Would you prefer to print food packaging with antibacterial ink to enhance food hygiene? A wide range of inks is available for paper and film, or UV inks for PP materials. The ink is SIAA certified, and the SIAA certification mark can be used on your printed materials. Ink odor is also reduced, enhancing the safety of packaging. Color and special printing techniques are also available. • Control odors from organic pigments and resins • Control odors from vegetable oil • Control vapors generated during the ink drying process • SIAA certified

    Target industry: Food/Beverage Printing/Photoengraving/Binding

    Miyako Pinting Ink Co.,Ltd

  • Antibacterial printing ink for paper packaging of pharmaceutical and food supplement products Antibacterial printing ink for paper packaging of pharmaceutical and food supplement products

    This product is the industry’s first SIAA (the Society of International Sustaining Growth for Antimicrobial Articles) certified printing ink in Japan. We manufacture printing inks for pharmaceutical and food supplement product packaging. With silver ions blended in, the ink can provide an antibacterial effect on printed surfaces. Furthermore, with an added special adsorbent, ink odor is also controlled. The following major causes of ink odor are also suppressed. • Organic pigments and resins • Vegetable oil • Vapors generated during the ink drying process You can provide safe products to your customers with our antibacterial and low-odor printing inks. This product is widely used for wrappers and packaging in the food industry

    Target industry: Food/Beverage Printing/Photoengraving/Binding

    Miyako Pinting Ink Co.,Ltd

  • SCARA robot THE600 SCARA robot THE600
    • Catalogue
    • Distributor required
    • Partnership required

    Newly designed SCARA robot THE600 is suitable for the assembly and inspection process of electronics equipment and automobile components where fast motion and precision is crucial. * Accurate movement trajectory, high speed operation and high load capacity are achieved at the same time. Maximum speed (axis one and axis two combined) is 8,017mm/sec and standard cycle time is at 0.3 seconds level (at 2 kg load). Maximum load is 12 kg. Allowable moment of inertia 0.25 (kg·m2 ). * A new model SCARA robot with thoroughly redesigned mechanism and control functions. * A new robot controller TS5000 Improvement in synchronized control and tracking precision by better servo performances. Improved communication performances,IoT-ready fast data communication. Faster control cycle (position control cycle is three times faster than the previous model) results in improved synchronized control and tracking precision. Real-time transmission of internal data is possible, by adopting a new CPU with high functionalities and high performance enhanced communication capabilities (Gigabit Ethernet.)

    SHIBAURA MACHINE CO., LTD.

  • Know how it works via skype! Know how it works via skype!
    • Catalogue

    Our online demonstration is just what you’re looking for. We will demonstrate how our machine works, and also answer all of your questions. You can call us, and we can demonstrate for you in your meetings, at your office desk, or even when you are stuck at home.

    Target industry: Electrical/Electronic Parts Optical Equipment/Parts Resin/Plastic/Rubber Products

    SOMAX CO., LTD.

  • Vertically articulated robot TV series Vertically articulated robot TV series
    • Catalogue

    3 types of vertically articulated robots with arm lengths of 572 mm, 800mm and 1000mm, suitable for handling and assembly in cellar manufacturing systems. Standing in for human laborers, our TV series robots can be used in the manufacture of automobile or precision electronic components. Facilitates automation, labor savings and better productivity.

    Target industry: Automotive Parts Consumer Electrical Appliances Electrical/Electronic Parts

    SHIBAURA MACHINE CO., LTD.

  • Vertically articulated robot TVL500 Vertically articulated robot TVL500
    • Catalogue

    A vertically articulated robot with an arm length of 500mm. Demonstrates high-productivity in assembly or transport in limited spaces. Provides first-class performance and great usability, with a variety of available options.

    Target industry: Automotive Parts Consumer Electrical Appliances Electrical/Electronic Parts

    SHIBAURA MACHINE CO., LTD.

  • SCARA robot TH series compact type (Arm lengths of 180mm - 350mm) SCARA robot TH series compact type (Arm lengths of 180mm - 350mm)
    • Catalogue

    The TH series offers SCARA robots with arm lengths of 180mm - 1200mm. Available from compact to large types, the TH series supports a wide range of applications. Options to assure compliance with cleanroom standards or water-and-dust proof requirements (IP65), ceiling mount, etc. are available. The TH series compact type is available with arm lengths of 180mm - 350mm.

    Target industry: Automotive Parts Consumer Electrical Appliances Electrical/Electronic Parts

    SHIBAURA MACHINE CO., LTD.

  • SCARA robot THP series (Arm lengths of 550mm - 700mm) SCARA robot THP series (Arm lengths of 550mm - 700mm)
    • Catalogue

    Never tires even after 24-hour high-cycle operations! The THP series is a high-speed, high-cycle SCARA robot that has achieved continuous extended operation at maximum speed. The THP series is available with arm lengths of 550mm and 700mm.

    Target industry: Automotive Parts Consumer Electrical Appliances Electrical/Electronic Parts

    SHIBAURA MACHINE CO., LTD.

  • SCARA robot THL series compact type (Arm lengths of 300mm and 400mm) SCARA robot THL series compact type (Arm lengths of 300mm and 400mm)
    • Catalogue

    The SCARA robot THL series compact type was developed bearing in mind the concepts of low cost, light weight and power savings. This globally strategic product targets Asian markets in particular and, to keep the price low, it focuses on features and performance designed to meet the needs of the global market. The THL series compact type is available with arm lengths of 300mm and 400mm.

    Target industry: Automotive Parts Consumer Electrical Appliances Electrical/Electronic Parts

    SHIBAURA MACHINE CO., LTD.

  • SCARA robot THL series large type (Arm lengths of 800mm - 1000mm) SCARA robot THL series large type (Arm lengths of 800mm - 1000mm)
    • Catalogue

    The SCARA robot THL series large type was developed bearing in mind the concepts of low cost, light weight and power savings. This globally strategic product targets Asian markets in particular and, to keep the price low, it focuses on features and performance designed to meet the needs of the global market. The THL series large type is available with arm lengths of 800mm - 1000mm.

    Target industry: Automotive Parts Consumer Electrical Appliances Electrical/Electronic Parts

    SHIBAURA MACHINE CO., LTD.

  • SCARA robot THL series (Arm lengths of 500mm - 700mm) SCARA robot THL series (Arm lengths of 500mm - 700mm)
    • Catalogue

    The SCARA robot THL series was developed bearing in mind the concepts of low cost, light weight and power savings. This globally strategic product targets Asian markets in particular and, to keep the price low, it focuses on features and performance designed to meet the needs of the global market. The THL series is available with arm lengths of 500mm - 700mm.

    Target industry: Automotive Parts Consumer Electrical Appliances Electrical/Electronic Parts

    SHIBAURA MACHINE CO., LTD.

  • [Newly releasing!] Mold Cooling Pipe Cleaning Machine Water Reamer Series "WR-35-AFIII" [Newly releasing!] Mold Cooling Pipe Cleaning Machine Water Reamer Series "WR-35-AFIII"
    • Catalogue

    Removes heavy rust and layers of impurities deposited by water inside pipes and restores cooling efficiency. It is a revolutionary cleaning method, because - Removes heavy rust and layers of impurities deposited by water inside pipes and forms a rust preventing coating at the same time. - Allows maintenance of cooling water pipe interiors without degradation. Dust is not generated. - Thanks to blown-air drying system, no flushing with water or neutralization is required after cleaning. - Due to its closed safety system, derusting water is not discharged. - Hardly any sludge, which can clog pipes after cleaning, is generated.

    Target industry: Electrical/Electronic Parts Optical Equipment/Parts Resin/Plastic/Rubber Products

    SOMAX CO., LTD.

  • VCC-HD1000 (Color) VCC-HD1000 (Color)
    • Catalogue

    VCC-HD1000 is a Full HD color camera module utilizing a 35mm full size CMOS image sensor. Video output 1080 60p/59.94p/50p (3G-SDI), 1080 60i/59.94i/50i/30p/29.97p/25p/24p/ 23.98p (HD-SDI), 720 60p/59.94p/50p (HD-SDI) are corresponded. [Features] ■ Features CIS original ISP, state-of-the-art “ClairvuTM” for superb imaging quality. ■ Infrared-level of high sensitivity. ■ GenLock function (Black burst or 3-value SYNC). ■ Camera can be controlled by RS-232C and RS-485. ■ LTC (Longitudinal Time code). ■ OSD (On Screen Display) function can be set by connecting an optional remote controller. It is said that the luminance level of starlight is 0.001lux. VCC-HD1000 can capture the light at 0.0005lux at F1.2 setting. Therefore, this model can be used under the environment darker than the starlight. Packed with versatile functions suitable to use for particular application such as surveillance, ITS, night shooting, etc.

    Target industry: Medical Instruments Forestry Media

    CIS Corporation

  • Industrial Robots Product Lineup Industrial Robots Product Lineup
    • Catalogue

    Please review our extensive range of industrial robots

    SHIBAURA MACHINE CO., LTD.

  • VCC-25CXP1MPS(B/W) / VCC-25CXP1RPS(Color) VCC-25CXP1MPS(B/W) / VCC-25CXP1RPS(Color)
    • Catalogue

    [CIS Pixel-shift Technology] This is a technology which increase the resolution of image sensor by shifting X and Y axes between the sensor’s pixel pitch 4 times in each direction, capturing images at each position, and synthesizing them to create a single image. With VCC-25CXP1MPS, equivalent to 100M pixels resolution can be acquired by 4 times shifting, and equivalent to 400M pixels resolution can be acquired by 16 times shifting. The camera is suitable for the applications which requires super-high resolution such as inspection, research/analysis, medical, archive, etc. For more information, please download our product catalog or contact our sales division.

    Target industry: Other Medical Supplies/Biotechnology Measurement/Analytical Instruments

    CIS Corporation

  • L-38-150 Large Spindle Drill Rig "Megalo" L-38-150 Large Spindle Drill Rig "Megalo"

    L-38-150 "Megalo" drill can handle large diameter Rod and Casing through its spindle I.D. 145mm, having enjoyed high prestige in Japanese market over long years with its versatility from high speed coring to tricone bit work. Optional L-Frame model is for larger diameter up to 900mm in water well drilling, etc.

    NLC Co., Ltd.

  • L-38-98 High Speed Diamond Core Drill Rig Made in Japan L-38-98 High Speed Diamond Core Drill Rig Made in Japan

    L-38 High Speed Core Drill Rig is renound model in the world for mineral exploration / soil investigation up to 565m throughout the world, equipped with 98mm Spindle Head and 8-step transmission for proper working speed.

    NLC Co., Ltd.

  • JGNL-20 Automatic Grouting Drill Rig "Endless Drill" JGNL-20 Automatic Grouting Drill Rig "Endless Drill"

    Designed for automatic jet grouting construction, especially for cement column making. Twin Spindle Heads realize continuous drilling/ pulling up a string and step-up jet grouting operations in one drill string in accordance with set program as required. This specific structure brings about more of productivity - reduction of time and labor in comparison with ordinary machines.

    NLC Co., Ltd.

  • DCC-RGBD1 (ToF+RGB camera) DCC-RGBD1 (ToF+RGB camera)
    • Catalogue

    This is a twin-lens board camera which integrates ToF camera and RGB camera. With ToF camera, not only the distance can be measured and acquired by using near-infrared light emitted from the camera, but also can acquire color YUV image. Also, because of its superb real-time performance, DCC-RGBD1 contributes to the applications of robot vision, automated driving, logistics, security, medical care, nursing care, etc. [Features] ■ToF camera development kit Provides exe control software and ROS driver package for acquiring images and controlling the camera. ■Acquires information on RGB and Depth by one camera ・Synchronizes and outputs YUV+D information by using on-board FPGA. ・Corresponds to a seamless measurement in the range of 30cm~5m at Wide Range mode.(At Super Near mode:15~70cm, At Wide mode:30cm~5m) Accuracy:Error±2mm (@15cm),Error±10mm(@5m) (Accuracy when compositing 100 images) ■Small footprint/USB3.0 interface utilized 55(W)×50(H)×35(D)mm USB3.0 UVC (Power feeding is not supported) A cable for power supply is supplied as an accessory.

    Target industry: Automotive/Transport Machinery Measurement/Analytical Instruments Transportation/Logistic/Warehouse

    CIS Corporation

  • NL-26 Portable/Compact Drill Rig NL-26 Portable/Compact Drill Rig

    NL-26 is a portable and compact drill rig equipped with Hydraulic Chuck with 6-step gearing system for precise drilling speed adjustment. Max. Dissassembly weight is 60kg, No Oil leakage, and Portability for mountainous job sites are primary features.

    NLC Co., Ltd.

  • NL-G80/NL-G80ⅡCompact/Portable Hydraulic Top Drive Drill Rig NL-G80/NL-G80ⅡCompact/Portable Hydraulic Top Drive Drill Rig

    Developed as a cost efficient solution for users requiring a portable drill for shallow coring, Geo technical and Tri-cone rotary drilling applications.  NL-G80Ⅱ- modified model with 2-step head gear for high speed coring – / NL-G150 with power-increased model are also offered. Equipped with Hydraulic Top Head drive and variable speed motors within the range of 50 to 800 rpm. Highly productive with its 1.7 m feed stroke.

    NLC Co., Ltd.

  • NL-55 Drill Rig  [1]Water well drilling [2]Geological Survey   MADE IN JAPAN NL-55 Drill Rig [1]Water well drilling [2]Geological Survey MADE IN JAPAN
    • Partnership required

    Designed for greater depth with larger diameter for civil engineering works, mineral exploration up to 1,500m, water well, hot spring well, geothermal exploration with its spindle I.D. of 145mm diameter. Having gained a high reputation, especially around Asian market, NL-55 has been introduced and worked at major mining & drilling companies in several types of drilling operations.

    Target industry: Construction/Mining Machinery Construction Mining

    NLC Co., Ltd.

  • NL-500 Hydraulic Exploration 500m Core Drill, MADE IN JAPAN NL-500 Hydraulic Exploration 500m Core Drill, MADE IN JAPAN
    • Partnership required

    NL-500 Drill was developed in pursuit of Safety Control, Labor Saving and Cost Efficiency, having drilling capacity up to 550m for mineral exploration, soil investigation, etc. Gear Drive Head is strong and powerful unlike chain drive.

    Target industry: Construction/Mining Machinery Mining Other

    NLC Co., Ltd.

  • NL-700-V2 Hydraulic Exploration 700m Core Drill, MADE IN JAPAN NL-700-V2 Hydraulic Exploration 700m Core Drill, MADE IN JAPAN
    • Partnership required

    NL-700-V2 was developed in pursuit of Safety Control, Labor Saving,, Cost Efficiency, and High Productivity.  Sliding Head erases downtime in dealing with larger casing without opening the head. Capable of wireline N size (69.9mm) drilling up to 700m of deep hole drilling (actual record : 940m in 60° angle hole drilling). Gear Drive Head is strong and powerful unlike chain drive.

    Target industry: Construction/Mining Machinery Construction Other Manufacturing

    NLC Co., Ltd.

  • [Simplified type] Motorized vertical test stand “MX Series” [Simplified type] Motorized vertical test stand “MX Series”
    • Catalogue

    The MX Series is a vertical motorized test stand for tension and compression measurements. You can conduct full-scale measurements at affordable prices. The MX-1000N for up to 1000N, the MX-5000N for up to 5000N. [Features] • Maintains stable speed and direction for highly replicable measurement • Used for a wide variety of tests, such as tension, compression and peeling • Over-load detection and load control when used with a force gauge * For details, please download our PDF documents or feel free to contact us.

    Target industry: Measurement/Analytical Instruments

    IMADA CO.,LTD.

  • [Higher grade model] Motorized vertical test stand “EMX-1000N” [Higher grade model] Motorized vertical test stand “EMX-1000N”
    • Catalogue

    The EMX-1000N is a test stand which can be used as a simplified tension and compression tester when paired with a force gauge and various attachments. This model displays high rigidity with various setting options, ideal for a wide range of measurements. [Features] -Uniformly maintains speed and direction for highly replicable measurement -Easy option settings with a dial and monitor -Not only for tension and compression testing, but also suitable for peeling or friction coefficient measurement -High-end model in motorized vertical test stands  Travel distance can be controlled with details like “Stop after X mm”  Up to 5 sets of conditions can be stored for efficient measurement -Highly precise measurement with exceptionally rigid shaft  Precision measurement with minimum deflection  Accurate load-displacement measurement -Applicable to a wide speed range, various measurements can be done with just a standard model  A wide speed range of 0.5 – 600 mm / min * For details, please download our PDF documents or feel free to contact us.

    Target industry: Measurement/Analytical Instruments

    IMADA CO.,LTD.

  • [Standard model] Horizontal motorized test stand “MH2 Series” [Standard model] Horizontal motorized test stand “MH2 Series”
    • Catalogue

    The MH2 Series is a horizontal motorized test stand with easy sample placement. Uniformly maintains speed and load direction for highly replicable measurement. With digitally controlled design, setting of measurement modes and speeds is easy. Used with a force gauge, a wide variety of tests can be conducted. [Features] ■Horizontal load can be applied ■Easy sample placement and force gauge set-up ■Test speeds are digitally controlled for more accurate and reliable measurements ■Endurance tests can be done by setting the number of strokes to be performed and load retention time ■Forward and backward speeds for endurance testing can be individually set ■Overload prevention and load value control functions are available  * Conditions apply * For details, please download our PDF documents or feel free to contact us.

    Target industry: Measurement/Analytical Instruments

    IMADA CO.,LTD.

  • [Standard model] Motorized vertical test stand“MX2 Series” [Standard model] Motorized vertical test stand“MX2 Series”
    • Catalogue

    The MX2 Series is a test stand which can be used as a simplified tension/compression tester when paired with a force gauge and attachments. Compared to measurement with a force gauge alone, results are more replicable. Imada offers over 50 force gauge models and over 100 types of attachments for test stands to provide optimal measurement solutions to our customers. [Features] ■Maintains uniform test speed and direction for highly replicable measurement. -Digital test speed setting -Applies straight load →Reduces inconsistency by different testers ■Endurance, repeat and various other tests -Endurance and repeat tests with timer and counter functions -Provides the following functions when used with ZTS/ZTA force gauge and CB-518 cable  ・Overload prevention  ・Controls movements by load values  ・Automatic start / recording of graph drawing ■Easy operation -Easy test speed and repeat cycle number settings with a dial and monitor ■Peeling tests / friction coefficient measurement -Not only for tension and compression testing, but also suitable for peeling tests and friction coefficient measurement

    Target industry: Measurement/Analytical Instruments

    IMADA CO.,LTD.

  • [Standard model] Analog force gauge “PS Series” [Standard model] Analog force gauge “PS Series”
    • Catalogue

    The PS Series analog force gauge is an easy-to-use accurate tension and compression measurement tool. Imada force gauges are manufactured with advanced technologies and long years of expertise under strict quality control, which maintains their high accuracy over time. Various models are available for a wide range of measurement. [Features] ■Cutting-edge design for hand-held use ■Light-weight robust aluminum alloy body ■Maintains high accuracy for a long time with our unique control mechanism and spring made of special material ■Stop-pin mechanism can perform peak measurement ■Compensates for the weight of attachments with zero-point adjustment mechanism ■Easy-to-read scale ■Comes with various attachments and a carrying case ■12-month warranty * For details, please download our PDF documents or feel free to contact us.

    Target industry: Measurement/Analytical Instruments

    IMADA CO.,LTD.

  • Imada “Data Analysis Software” Imada “Data Analysis Software”
    • Catalogue

    Imada Data Analysis Software generates real-time graphs from load data transmitted by the digital force gauge, connected to a PC with a USD or RS232C cable. Data management and analysis are easy. ■Benefits of using this software Processing data to graphs visualizes the load transition. Statistics are automatically generated, and data is saved. Data management becomes easy. [Our software] ●Force-Recorder (Standard/Light): load-time (torque-time) graph drawing software ●Force Recorder (Professional): load-displacement (torque-angle) graph drawing software ●Force Logger Plus: multiple force gauge data management software ●ZLINK4: load-time (torque-time) graph drawing software ●ZP Recorder: load-time graph drawing software ●F-S Recorder: load-displacement graph drawing software ●HCC-Easy: tension graph drawing software

    Target industry: Measurement/Analytical Instruments

    IMADA CO.,LTD.

  • [Standard model] Load cell for compression “LC Series” [Standard model] Load cell for compression “LC Series”
    • Catalogue

    The LC Series is a compact and lightweight load cell for compression. Easy installation and handling. With an airtight structure, this series offers great stability and reliability and can be used anywhere. Stainless steel (SUS630) material provides outstanding corrosion resistance. [Features] ■High-precision compression load cell ■Button-shaped, easy to place in narrow gaps ■For data output, connect to an amplifier * For details, please download our PDF documents or feel free to contact us.

    Target industry: Measurement/Analytical Instruments

    IMADA CO.,LTD.

  • [Standard/High load model] Load cell for compression and tension “DPU Series” [Standard/High load model] Load cell for compression and tension “DPU Series”
    • Catalogue

    The “DPU Series” is a load cell suitable for installation into equipment. It’s a rectangular parallelepiped that fits easily into facilities. Embedded screw holes make installation easier. For both tension and compression measurement. Set attachments to the male thread to use. A wide range of attachments is available. [Features] ■The indicator (amplifier) has various input and output functions ・ Select one of four indicators to display load values 1.Desktop model: FA Plus2 2.Sensor replaceable model: eZT * eZ-Connect series: eDPU is compatible with sensor replacement model eZT 3. Portable model (standard): ZTS separate type 4. Portable model (advanced): ZTA separate type ■The following settings are available in all indicators  ・ USB/RS232C/Analog, etc.  ・ Pass or fail judgment/peak values/overload, etc. ■Generates graphs using included software * For details, please download our PDF documents or feel free to contact us.

    Target industry: Measurement/Analytical Instruments

    IMADA CO.,LTD.

  • Desktop model amplifier for load cell “FA Plus2 Series” Desktop model amplifier for load cell “FA Plus2 Series”
    • Catalogue

    The FA Plus2 Series is a desktop model amplifier for load cells. Its box-type design makes it easier to install into equipment. Provides a wide range of output functions, connecting to external equipment such as PLC is easy. According to the specifications of the connected external equipment or PLC, the baud rate (communication speed) can be adjusted, and output can be transmitted at 100 data/second via serial communication (RS-232C). At a sampling speed of 2000 cycles/second, sudden changes of force can be measured without error. [Features] ■Clear display, easy to use ■Pass or fail and speedy judgement ■Has a wide range of output functions ■Easy-to-install design ■Can be configured with industrial power supply (optional) * For details, please download our PDF documents or feel free to contact us.

    Target industry: Measurement/Analytical Instruments

    IMADA CO.,LTD.

  • Sensor interchangeable amplifier “eZT” Sensor interchangeable amplifier “eZT”
    • Catalogue

    The “eZT” is a sensor-interchangeable amplifier. Load cells can be changed without any adjustment required. Based on the equipment and environment, replace load cells of different shapes and functions to perform routine various measurements. Can be kept as a spare sensor unit for everyday measurement. [Features] ■A wide range of applications ・Different types of force (compression and torque) can be measured by a single unit of eZT ・Measurement with a big gap between low and high load values can be handled by a single unit of eZT * Only one load cell at a time can be attached to an eZT. ■Cost savings ・Usually the same number of indicators (amplifiers) as the load cells is required. However, since eZT can be used with multiple load cells, you could save the cost of preparing the same number of indicators. ■Reduce processing risk ・Keeping a spare load cell, a malfunctioning one can be replaced immediately without stopping the line. * For details, please download our PDF documents or feel free to contact us.

    Target industry: Measurement/Analytical Instruments

    IMADA CO.,LTD.

  • Digital force gauge (load measuring tool) “DSV/DST Series” Digital force gauge (load measuring tool) “DSV/DST Series”
    • Catalogue

    The DSV/DST Series is a digital force gauge (load measuring tool) for hand-held use. To make operation simple and accurate, it comes with a variety of functions. If the force gauge detects any change in the tester’s holding position, a warning alarm sounds, indicating the need to check whether the load is still upright. In addition, during continuous measuring cycles, peak values are automatically updated and saved. This function contributes to improved work efficiency as it isn’t necessary to keep resetting and saving values after each measurement. [Features] ■Up to 30 hours of battery life ■Can be charged from PC or mobile batteries ■Easy data management with the included software ■Up to 10000N * For details, please refer to the product specifications or feel free to contact us.

    Target industry: Measurement/Analytical Instruments

    IMADA CO.,LTD.

  • Chip peeling fixture “GT Series” Chip peeling fixture “GT Series”
    • Catalogue

    The GT Series is a fixture for peel (shear) strength testing of electronic parts. Compact and lightweight, this series can be used for low load values and in narrow places. Easy measurement at low cost. GT-10: attach a hook to the chip to be tested, pull up and measure the peel strength GT-20: push the fixture against the chip and measure the shear (extrusion) strength [Features] ■Fixture for peel (shear) strength testing of electronic parts ■Compact and lightweight, suitable for low load values and use in narrow places ■Easy measurement at low cost * For details, please download our PDF documents or feel free to contact us.

    Target industry: Measurement/Analytical Instruments

    IMADA CO.,LTD.

  • Lead-free solder testing fixture “LF” Lead-free solder testing fixture “LF”
    • Catalogue

    The LF is designed for solder strength testing of QFP lead joints using lead-free soldering. Comes with 2 types of tables at different angles of 45° and 90°. Accurate and fine positioning on a precision XY stage. You can perform tests compliant with JIS Z3198-6 (2003) “Test methods for lead-free solders Part 6: Methods for 45°pull test of solder joints on QFP lead” and JIS Z3198-7 (2003) "Test methods for lead-free solders Part 7: Methods for shear strength of solder joints on chip components” [Features] ■Fixture to measure tensile strength and shear strength of solder joints ■Accurate and fine positioning on a precision XY stage ■JIS compliant strength tests * For details, please download our PDF documents or feel free to contact us.

    Target industry: Measurement/Analytical Instruments

    IMADA CO.,LTD.

  • Flat chuck "GC series" Flat chuck "GC series"
    • Catalogue

    The GC Series is a multi-purpose flat chuck which can be used for thin to thick samples. As a tensile strength test chuck for various materials, it can be mounted on our force gauge. The opening is wide, suitable for various applications. Three types of selections for different load values and opening sizes. [Features] ■Wide opening for various applications ■Three different types for different loads and opening sizes ■Tensile strength measurement attachment which can grip from thin to thick samples * For details, please download our PDF documents or feel free to contact us.

    Target industry: Measurement/Analytical Instruments

    IMADA CO.,LTD.

  • Forming press test fixture “PR Series” Forming press test fixture “PR Series”
    • Catalogue

    The PR Series is a fixture for pressure resistance testing of retort pouches, heat-sealing wrappers, general food wrappers, cardboard, etc. JIS standard compliant pressure resistance tests can be done when used with dedicated force gauge, test stand and connecting cable. (JIS Z0238:1998 standard partially compliant) [Features] •Accurate results with biaxial structure, which maintains samples in parallel for uniform load application •For endurance testing, use with our recommended product configuration to set test speed, repeat cycle number, load value, timer and other options for optimal performance * For details, please download our PDF documents or feel free to contact us.

    Target industry: Measurement/Analytical Instruments

    IMADA CO.,LTD.

  • Film puncture test fixture “TKS Series” Film puncture test fixture “TKS Series”
    • Catalogue

    The TKS Series is a film puncture test fixture ideal for thin samples such as liquid crystal films, PET bottles, films, aluminum foils and metallic foils. When used with our force gauge and test stand, you can perform tests partially compliant with JIS Z1707(1997) “General rules of plastic films for food packaging, 7.4 Puncture test”. [Features] - TKS-20N: for thin films up to 20N, affordable range - TKS-250N: for liquid crystal films, aluminum foils, PET bottles and various other materials up to 250N  Samples are held firmly on the table by rubber rings [Recommended product configuration] - Film puncture test fixture: TKS-20N (max. 20N) / TKS-250N (max. 250N) - Standard model digital force gauge: ZTS series - Motorized test stand: MX2-500N - Load control cable: CB-518 * For details, please download our PDF documents or feel free to contact us.

    Target industry: Measurement/Analytical Instruments

    IMADA CO.,LTD.

  • [Horizontal model] Manual test stand “SH Series” [Horizontal model] Manual test stand “SH Series”
    • Catalogue

    The SH Series is a manual test stand that uses the screw feed method to precisely adjust position for stable thrust. Horizontal table design allows easy sample placement. The SH-1000 comes with a cover to prevent contamination by sample fragments. The SH-3000 is suitable for strength testing of a variety of materials up to 3000N. [Features] ■Wheel-operated handle stand ■Horizontal table design for easy sample placement ■Screw feed method enables precise adjustment for stable thrust ■Designed to pair with various Imada force gauges * For details, please download our PDF documents or feel free to contact us.

    Target industry: Measurement/Analytical Instruments

    IMADA CO.,LTD.

  • Simplified manual test stand “SVL-1000N” “SVH-1000N” Simplified manual test stand “SVL-1000N” “SVH-1000N”
    • Catalogue

    Used with a force gauge, the SV Series can measure tension and compression up to 1000N. As test conditions are applied uniformly, highly replicable measurements are achieved. Load measurement is easily done by lever or handle operation. The SVL-1000N comes with a lever for better work efficiency. The SVH-1000N has a handle for great travel distance control. [Features] ■Up to 1000N of tension and compression load ■Stroke adjustment with mechanical stopper ■Applied to a wide range of measurements with various options ■Compact and lightweight, easy to carry [Features] ■SVL-1000N, lever type  Easy lever operation, suitable for work efficiency improvement ■SVH-1000N, handle type  Suitable for frequent travel distance adjustments (3mm / rotation) * For details, please download our PDF documents or feel free to contact us.

    Target industry: Measurement/Analytical Instruments

    IMADA CO.,LTD.

  • Food firmness measurement unit “FCA-DSV-50N Series” Food firmness measurement unit “FCA-DSV-50N Series”
    • Catalogue

    The "FCA-DSV-50N Series" is a test stand which can perform a compression test with a fixed amount of pressure. Easy operation with lever. With included attachments, multiple actions can be applied: squash/push-in, cut/crack. In addition, the force gauge can be connected to a PC with a USB cable to transmit data. With the included software, the collected data is processed and managed. [Features] •Easy squashing force measurement with a fixed amount of pressure •Adjusts push-in amount with a knob •Easy operation with a lever, offering high replicability •During continuous measuring cycles, peak values are automatically updated and saved, contributing to better work efficiency •Force gauge can be connected to a PC with a USB cable •With the included software, data management is easy •Stainless steel for easy cleaning * For details, please download our PDF documents or feel free to contact us. [Video is now available] A video of firmness testing of cookies is available. Please have a look.

    Target industry: Measurement/Analytical Instruments

    IMADA CO.,LTD.

  • Rheometer (texture analyzer) “FRTS Series” Rheometer (texture analyzer) “FRTS Series”
    • Catalogue

    What is the bread fluffiness? What is the crunchiness of rice crackers? The FRTS series is a tester to evaluate, quantify and analyze food texture, important for R&D and quality control in the food industry. In addition to the included attachments, dozens more optional selections are available for different types of food. [Features] ■Target food Cakes, pastes and doughs, bread, rice (cooked/raw), noodles, beans (cooked/raw), eggs, meat and fish (cooked/raw), vegetables, fruits and many others ■Straightforward operation with user-friendly touch panel When selecting the food and the standard to be tested from the list, recommended test parameters are displayed Easy manual test parameter settings and registration ■Accurate and precise measurement High accuracy: ± 0.2% F.S. ± 1 digit High-speed sampling: 1000Hz, peak value of hard ingredients can be accurately obtained with high responsiveness ■Easy data management Easy graph drawing using the included software (load-time and load-displacement versions) Automatic calculation of hardness, adhesiveness, cohesiveness, adhesive force, elasticity, gum properties, etc. ■Easy to clean Stainless steel measuring unit with removable tray, easy cleaning [Video is now available] A video of food texture measurement is available.

    Target industry: Measurement/Analytical Instruments

    IMADA CO.,LTD.

  • Motorized torque stand “MTS Series” Motorized torque stand “MTS Series”
    • Catalogue

    The “MTS Series” is excellent at maintaining constant rotation speed, contributing to highly precise torque measurement. Applications include opening torque of PET bottles or pharmaceutical bottles, operating force of rotary switches and twisting strength of boards. The measurement provides high replicability of various rotating and twisting forces. Some options allow angle-torque analysis, which is useful for characteristic evaluation. [Features] ■Regulates the rotating speed for highly precise torque measurement ■Automatic testing based on the input parameters, measuring cap opening torque, angle-torque analysis (optional), etc., applicable for a wide range of measurements ■Offers testing of various samples with clamping attachments from our wide- ranging product lineup * For details, please download our PDF documents or feel free to contact us.

    Target industry: Measurement/Analytical Instruments

    IMADA CO.,LTD.

  • Driver torque meter “I Series” Driver torque meter “I Series”
    • Catalogue

    The I Series is a driver torque meter for electric and torque drivers. Supports routine inspection with easy operation. Serial data output for data management. [Features] ■Torque measurement of electric and torque drivers ■Easy operation for routine inspection ■Serial data output for efficient data management * For details, please download our PDF documents or feel free to contact us.

    Target industry: Measurement/Analytical Instruments

    IMADA CO.,LTD.

  • Peel tester “IPTS-5N” Peel tester “IPTS-5N”
    • Catalogue

    The IPTS-5N is a peel tester for embossed carrier tape, compliant with JIS standards. It provides high usability and accuracy. From placing the sample, measurement to generating graphs can be done in easy operations. With 6 speed settings, high speed testing is also achievable. Software is included for accurate graph drawing. [Features] ■Allows peel testing at high speed, a maximum speed of 1500mm/min ■Comes with drawing software to generate accurate graphs by processing data transmitted at 2000 data/second ■Embossed carrier tape peel testing partially compliant with JIS/IEC standards  JIS C0806-3 (2014) “Packaging of Components for Automatic Handling”  IEC 60286-3 (2013) “Packaging of Components for Automatic Handling” * For details, please download our PDF documents or feel free to contact us.

    Target industry: Measurement/Analytical Instruments

    IMADA CO.,LTD.

  • [Video is now available] Automatic harness tester "ACT Series" [Video is now available] Automatic harness tester "ACT Series"
    • Catalogue

    The ACT Series is an electric crimp terminal tensile strength tester. With this tester, crimping force of crimp terminals in wire harnesses can be easily measured. The operation is simple: with just a single button, measuring and saving data can be done, which dramatically improves the efficiency of harness testing. Partially compliant with JIS C 2805, JIS C 5402-16-4, UL 486A-486B standards. [Features] ■2 test modes are available: "Break” (pull and break) and “Keep” (with conditions of time and load values) modes ■Up to 26 sets of test parameters can be saved and used repeatedly ■Includes software for data management and condition settings on PC ■Offers testing partially compliant with:  JIS C 2805 (2010) " Crimp-type terminal lugs for copper conductors, 7.11 tensile strength test" ※Other tests compliant with JIS/UL standards are available [Video is now available] A video of wire harness crimping (pull and break) test is available. Please have a look. * For details, please download our PDF documents or feel free to contact us.

    Target industry: Measurement/Analytical Instruments

    IMADA CO.,LTD.

All From 691 1 - 80 items are displayed

Location

PAGE TOP