Measuring instrument/Measurement hardware/Related product/Related service |
|
---|
All From 97 1 - 80 items are displayed
The “TYPE4158N” is a free-field 1/4-inch microphone with frequencies of 20Hz to 100 kHz. Sound pressure sensitivity including the preamp is -50 dB ±3 dB re 1V/Pa (3.2 mV/Pa). Since this microphone is compact, impact caused by reflection or diffraction is minimal, and its sound pressure sensitivity is 3.2 mV/Pa. Thus, it’s also suitable for measurement with loud sound pressure. Since this product is IEPE compatible, it can be connected directly to devices supplying constant current, such as FFT analyzers or AD converters. [Features] •With a BNC cable, connects directly to analytic devices such as FFT analyzers •Low-cost measurement with great accuracy •Long-term stability assured by applying pre-aging process of heating it to a high temperature of 360°C * For details, please click the external link below or feel free to contact us.
Target industry: Measurement/Analytical Instruments
The “TYPE 4160N” is a free-field 1/4-inch microphone with frequencies of 20Hz to 20 kHz. Sound pressure sensitivity including the preamp is -44 dB ±3 dB re 1V/Pa (6.3 mV/Pa). Since this product is IEPE compatible, it can be connected directly to devices supplying constant current, such as FFT analyzers or AD converters. Low cost and ideal for multi-channel measurement. [Features] •With a BNC cable, connects directly to analytic devices such as FFT analyzers •Low-cost measurement with great accuracy •Long-term stability assured by applying pre-aging process of heating it to a high temperature of 360°C * For details, please click the external link below or feel free to contact us.
Target industry: Measurement/Analytical Instruments
The “TYPE7152N” is a free-field 1/2-inch microphone with frequencies of 20 Hz to 20 kHz. Sound pressure sensitivity including the preamp is -31 dB ±1 dB re 1V/Pa (28.1 mV/Pa). Since this product is IEPE compatible, it can be connected directly to devices supplying constant current, such as FFT analyzers or AD converters. [Features] •With a BNC cable, connects directly to analytic devices such as FFT analyzers •Low-cost measurement with great accuracy •Long-term stability assured by applying pre-aging process of heating it to a high temperature of 360°C * For details, please click the external link below or feel free to contact us.
Target industry: Measurement/Analytical Instruments
The “TYPE 7146” is a free-field 1/2-inch microphone with frequencies of 20Hz to 20 kHz. Sound pressure sensitivity including the preamp is -27 dB ±2 dB re 1V/Pa (44.7 mV/Pa). Since this product is IEPE compatible, it can be connected directly to devices supplying constant current, such as FFT analyzers or AD converters. [Features] •With a BNC cable, connects directly to analytic devices such as FFT analyzers •Low-cost measurement with great accuracy •Long-term stability assured by applying pre-aging process of heating it to a high temperature of 360°C * For details, please click the external link below or feel free to contact us.
Target industry: Measurement/Analytical Instruments
The “TYPE 2110” is a vibration level calibrator for maintenance management. With this product, vibration calibration compliant with “JIS C 1510:1995 - Vibration level meters” on intensively used instruments can be done effortlessly with great accuracy. Switching between different commercial power supply frequencies (50Hz and 60Hz) is easy, allowing calibration on site. Used with a pic-up holder, you can also conduct horizontal calibration. [Features] • High-accuracy inspection and calibration • Horizontal calibration is possible • Compliant with “JIS C 1510:1995 - Vibration level meters” * For details, please download our catalogs or feel free to contact us.
Target industry: Measurement/Analytical Instruments Industrial Machinery/Devices Industrial Electrical/Control Equipment
The ACCURA is a low-cost, compact and easy-to-operate sound level meter designed for everyday use. This quality sound level meter, which conforms to various measurement acts, is suitable for general households, schools, or laboratories and factories where accuracy is critical. [Features] •Compact design at low cost, yet conforms to various measurement acts such as JIS and IEC •Compact design, pocket-sized •Easy operation, like using a smartphone, without requiring any special training or skills •Measures Equivalent Continuous Sound Pressure Level (Leq), allowing environmental noise measurement for occupational health. •LCD monitor with a backlight * For details, please download our catalogs or feel free to contact us.
Target industry: Machine Parts Industrial Machinery/Devices Industrial Electrical/Control Equipment
The TYPE 6224/6226 is a compact, lightweight, easy-to-use and cost-effective sound level meter. This sound level meter measures Equivalent Continuous Sound Pressure Level (Leq), Sound Exposure Level (Le) and Percentile Noise Level (Lx), making it ideal for environmental noise measurement. With a wide range of functions and easy operation, it’s perfect for noise level measurement of vehicles, aircrafts and factories, as well as quality control and various testing applications. The RS-232C interface comes standard, making it connectable to an external CPU to conduct continuous measurement. [Features] •Percentile Noise Level (Lx) - any 5 random values •Equivalent Continuous Sound Pressure Level (Leq) measurement ⇒ Environmental noise measurement required for occupational health •Wide linearity range of 100dB •With RS-232C interface, data can be processed on a PC •With built-in memory, up to 10,000 records can be stored * For details, please download our catalogs or feel free to contact us.
Target industry: Machine Parts Industrial Electrical/Control Equipment Industrial Machinery/Devices
The "TYPE 3233" conforms to the Measurement Act JIS C 1510:1955. A compact and lightweight vibration level meter is so powerful that it can be used at any measuring site. Used together with a vibration pickup "TYPE 7833", you can measure vibration and acceleration levels of ground, floors and seats simultaneously in 3 directions, X, Y and Z axis. Measurements and calculations made possible with this product are vibration velocity level (Lv), vibration acceleration level (Lva), equivalent continuous sound pressure level (Leq), maximum sound level (Lmax), minimum sound level (Lmin) and percentile noise level (Lx). Measurements are digitally displayed on an LCD screen. [Features] •Compact and lightweight, easy to hold •On a large LCD screen with backlight, the measured values and bar graphs are digitally displayed •Wide range linearity of 75dB, no switching required •Maximum, minimum, percentile noise and equivalent continuous sound pressure levels are simultaneously calculated in 3 dimensions and selectively displayed •Built-in RS-232C interface * For details, please download our catalogs or feel free to contact us.
Target industry: Industrial Machinery/Devices Iron and steel industry/Metal material Food/Beverage
The “Type 3116” is compact, no bigger than your mobile phone. Like a doctor for our industry, a stethoscope or headphone can be attached (optional) to measure vibration levels with great accuracy. Just like creating medical records for health care management, data is collected and used for control and maintenance of your facilities. With data holding function, screen reading becomes even easier. [Features] •Like using a stethoscope, you can pinpoint vibration measurement in narrow areas •Only 130g and compact design, it can be carried on business trips or use on-site •Small-bodied like a mobile phone, it allows one-hand operation •With its built-in memory, up to 256 records can be stored •Built-in serial interface allows data processing on a PC * For details, please download our catalogs or feel free to contact us.
Target industry: Machine Parts Industrial Machinery/Devices Industrial Electrical/Control Equipment
The MX Series is a vertical motorized test stand for tension and compression measurements. You can conduct full-scale measurements at affordable prices. The MX-1000N for up to 1000N, the MX-5000N for up to 5000N. [Features] • Maintains stable speed and direction for highly replicable measurement • Used for a wide variety of tests, such as tension, compression and peeling • Over-load detection and load control when used with a force gauge * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
The EMX-1000N is a test stand which can be used as a simplified tension and compression tester when paired with a force gauge and various attachments. This model displays high rigidity with various setting options, ideal for a wide range of measurements. [Features] -Uniformly maintains speed and direction for highly replicable measurement -Easy option settings with a dial and monitor -Not only for tension and compression testing, but also suitable for peeling or friction coefficient measurement -High-end model in motorized vertical test stands Travel distance can be controlled with details like “Stop after X mm” Up to 5 sets of conditions can be stored for efficient measurement -Highly precise measurement with exceptionally rigid shaft Precision measurement with minimum deflection Accurate load-displacement measurement -Applicable to a wide speed range, various measurements can be done with just a standard model A wide speed range of 0.5 – 600 mm / min * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
The MH2 Series is a horizontal motorized test stand with easy sample placement. Uniformly maintains speed and load direction for highly replicable measurement. With digitally controlled design, setting of measurement modes and speeds is easy. Used with a force gauge, a wide variety of tests can be conducted. [Features] ■Horizontal load can be applied ■Easy sample placement and force gauge set-up ■Test speeds are digitally controlled for more accurate and reliable measurements ■Endurance tests can be done by setting the number of strokes to be performed and load retention time ■Forward and backward speeds for endurance testing can be individually set ■Overload prevention and load value control functions are available * Conditions apply * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
The MX2 Series is a test stand which can be used as a simplified tension/compression tester when paired with a force gauge and attachments. Compared to measurement with a force gauge alone, results are more replicable. Imada offers over 50 force gauge models and over 100 types of attachments for test stands to provide optimal measurement solutions to our customers. [Features] ■Maintains uniform test speed and direction for highly replicable measurement. -Digital test speed setting -Applies straight load →Reduces inconsistency by different testers ■Endurance, repeat and various other tests -Endurance and repeat tests with timer and counter functions -Provides the following functions when used with ZTS/ZTA force gauge and CB-518 cable ・Overload prevention ・Controls movements by load values ・Automatic start / recording of graph drawing ■Easy operation -Easy test speed and repeat cycle number settings with a dial and monitor ■Peeling tests / friction coefficient measurement -Not only for tension and compression testing, but also suitable for peeling tests and friction coefficient measurement
Target industry: Measurement/Analytical Instruments
The PS Series analog force gauge is an easy-to-use accurate tension and compression measurement tool. Imada force gauges are manufactured with advanced technologies and long years of expertise under strict quality control, which maintains their high accuracy over time. Various models are available for a wide range of measurement. [Features] ■Cutting-edge design for hand-held use ■Light-weight robust aluminum alloy body ■Maintains high accuracy for a long time with our unique control mechanism and spring made of special material ■Stop-pin mechanism can perform peak measurement ■Compensates for the weight of attachments with zero-point adjustment mechanism ■Easy-to-read scale ■Comes with various attachments and a carrying case ■12-month warranty * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
Imada Data Analysis Software generates real-time graphs from load data transmitted by the digital force gauge, connected to a PC with a USD or RS232C cable. Data management and analysis are easy. ■Benefits of using this software Processing data to graphs visualizes the load transition. Statistics are automatically generated, and data is saved. Data management becomes easy. [Our software] ●Force-Recorder (Standard/Light): load-time (torque-time) graph drawing software ●Force Recorder (Professional): load-displacement (torque-angle) graph drawing software ●Force Logger Plus: multiple force gauge data management software ●ZLINK4: load-time (torque-time) graph drawing software ●ZP Recorder: load-time graph drawing software ●F-S Recorder: load-displacement graph drawing software ●HCC-Easy: tension graph drawing software
Target industry: Measurement/Analytical Instruments
The LC Series is a compact and lightweight load cell for compression. Easy installation and handling. With an airtight structure, this series offers great stability and reliability and can be used anywhere. Stainless steel (SUS630) material provides outstanding corrosion resistance. [Features] ■High-precision compression load cell ■Button-shaped, easy to place in narrow gaps ■For data output, connect to an amplifier * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
The “DPU Series” is a load cell suitable for installation into equipment. It’s a rectangular parallelepiped that fits easily into facilities. Embedded screw holes make installation easier. For both tension and compression measurement. Set attachments to the male thread to use. A wide range of attachments is available. [Features] ■The indicator (amplifier) has various input and output functions ・ Select one of four indicators to display load values 1.Desktop model: FA Plus2 2.Sensor replaceable model: eZT * eZ-Connect series: eDPU is compatible with sensor replacement model eZT 3. Portable model (standard): ZTS separate type 4. Portable model (advanced): ZTA separate type ■The following settings are available in all indicators ・ USB/RS232C/Analog, etc. ・ Pass or fail judgment/peak values/overload, etc. ■Generates graphs using included software * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
The FA Plus2 Series is a desktop model amplifier for load cells. Its box-type design makes it easier to install into equipment. Provides a wide range of output functions, connecting to external equipment such as PLC is easy. According to the specifications of the connected external equipment or PLC, the baud rate (communication speed) can be adjusted, and output can be transmitted at 100 data/second via serial communication (RS-232C). At a sampling speed of 2000 cycles/second, sudden changes of force can be measured without error. [Features] ■Clear display, easy to use ■Pass or fail and speedy judgement ■Has a wide range of output functions ■Easy-to-install design ■Can be configured with industrial power supply (optional) * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
The “eZT” is a sensor-interchangeable amplifier. Load cells can be changed without any adjustment required. Based on the equipment and environment, replace load cells of different shapes and functions to perform routine various measurements. Can be kept as a spare sensor unit for everyday measurement. [Features] ■A wide range of applications ・Different types of force (compression and torque) can be measured by a single unit of eZT ・Measurement with a big gap between low and high load values can be handled by a single unit of eZT * Only one load cell at a time can be attached to an eZT. ■Cost savings ・Usually the same number of indicators (amplifiers) as the load cells is required. However, since eZT can be used with multiple load cells, you could save the cost of preparing the same number of indicators. ■Reduce processing risk ・Keeping a spare load cell, a malfunctioning one can be replaced immediately without stopping the line. * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
The DSV/DST Series is a digital force gauge (load measuring tool) for hand-held use. To make operation simple and accurate, it comes with a variety of functions. If the force gauge detects any change in the tester’s holding position, a warning alarm sounds, indicating the need to check whether the load is still upright. In addition, during continuous measuring cycles, peak values are automatically updated and saved. This function contributes to improved work efficiency as it isn’t necessary to keep resetting and saving values after each measurement. [Features] ■Up to 30 hours of battery life ■Can be charged from PC or mobile batteries ■Easy data management with the included software ■Up to 10000N * For details, please refer to the product specifications or feel free to contact us.
Target industry: Measurement/Analytical Instruments
The GT Series is a fixture for peel (shear) strength testing of electronic parts. Compact and lightweight, this series can be used for low load values and in narrow places. Easy measurement at low cost. GT-10: attach a hook to the chip to be tested, pull up and measure the peel strength GT-20: push the fixture against the chip and measure the shear (extrusion) strength [Features] ■Fixture for peel (shear) strength testing of electronic parts ■Compact and lightweight, suitable for low load values and use in narrow places ■Easy measurement at low cost * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
The LF is designed for solder strength testing of QFP lead joints using lead-free soldering. Comes with 2 types of tables at different angles of 45° and 90°. Accurate and fine positioning on a precision XY stage. You can perform tests compliant with JIS Z3198-6 (2003) “Test methods for lead-free solders Part 6: Methods for 45°pull test of solder joints on QFP lead” and JIS Z3198-7 (2003) "Test methods for lead-free solders Part 7: Methods for shear strength of solder joints on chip components” [Features] ■Fixture to measure tensile strength and shear strength of solder joints ■Accurate and fine positioning on a precision XY stage ■JIS compliant strength tests * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
The GC Series is a multi-purpose flat chuck which can be used for thin to thick samples. As a tensile strength test chuck for various materials, it can be mounted on our force gauge. The opening is wide, suitable for various applications. Three types of selections for different load values and opening sizes. [Features] ■Wide opening for various applications ■Three different types for different loads and opening sizes ■Tensile strength measurement attachment which can grip from thin to thick samples * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
The PR Series is a fixture for pressure resistance testing of retort pouches, heat-sealing wrappers, general food wrappers, cardboard, etc. JIS standard compliant pressure resistance tests can be done when used with dedicated force gauge, test stand and connecting cable. (JIS Z0238:1998 standard partially compliant) [Features] •Accurate results with biaxial structure, which maintains samples in parallel for uniform load application •For endurance testing, use with our recommended product configuration to set test speed, repeat cycle number, load value, timer and other options for optimal performance * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
The TKS Series is a film puncture test fixture ideal for thin samples such as liquid crystal films, PET bottles, films, aluminum foils and metallic foils. When used with our force gauge and test stand, you can perform tests partially compliant with JIS Z1707(1997) “General rules of plastic films for food packaging, 7.4 Puncture test”. [Features] - TKS-20N: for thin films up to 20N, affordable range - TKS-250N: for liquid crystal films, aluminum foils, PET bottles and various other materials up to 250N Samples are held firmly on the table by rubber rings [Recommended product configuration] - Film puncture test fixture: TKS-20N (max. 20N) / TKS-250N (max. 250N) - Standard model digital force gauge: ZTS series - Motorized test stand: MX2-500N - Load control cable: CB-518 * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
The SH Series is a manual test stand that uses the screw feed method to precisely adjust position for stable thrust. Horizontal table design allows easy sample placement. The SH-1000 comes with a cover to prevent contamination by sample fragments. The SH-3000 is suitable for strength testing of a variety of materials up to 3000N. [Features] ■Wheel-operated handle stand ■Horizontal table design for easy sample placement ■Screw feed method enables precise adjustment for stable thrust ■Designed to pair with various Imada force gauges * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
Used with a force gauge, the SV Series can measure tension and compression up to 1000N. As test conditions are applied uniformly, highly replicable measurements are achieved. Load measurement is easily done by lever or handle operation. The SVL-1000N comes with a lever for better work efficiency. The SVH-1000N has a handle for great travel distance control. [Features] ■Up to 1000N of tension and compression load ■Stroke adjustment with mechanical stopper ■Applied to a wide range of measurements with various options ■Compact and lightweight, easy to carry [Features] ■SVL-1000N, lever type Easy lever operation, suitable for work efficiency improvement ■SVH-1000N, handle type Suitable for frequent travel distance adjustments (3mm / rotation) * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
The "FCA-DSV-50N Series" is a test stand which can perform a compression test with a fixed amount of pressure. Easy operation with lever. With included attachments, multiple actions can be applied: squash/push-in, cut/crack. In addition, the force gauge can be connected to a PC with a USB cable to transmit data. With the included software, the collected data is processed and managed. [Features] •Easy squashing force measurement with a fixed amount of pressure •Adjusts push-in amount with a knob •Easy operation with a lever, offering high replicability •During continuous measuring cycles, peak values are automatically updated and saved, contributing to better work efficiency •Force gauge can be connected to a PC with a USB cable •With the included software, data management is easy •Stainless steel for easy cleaning * For details, please download our PDF documents or feel free to contact us. [Video is now available] A video of firmness testing of cookies is available. Please have a look.
Target industry: Measurement/Analytical Instruments
What is the bread fluffiness? What is the crunchiness of rice crackers? The FRTS series is a tester to evaluate, quantify and analyze food texture, important for R&D and quality control in the food industry. In addition to the included attachments, dozens more optional selections are available for different types of food. [Features] ■Target food Cakes, pastes and doughs, bread, rice (cooked/raw), noodles, beans (cooked/raw), eggs, meat and fish (cooked/raw), vegetables, fruits and many others ■Straightforward operation with user-friendly touch panel When selecting the food and the standard to be tested from the list, recommended test parameters are displayed Easy manual test parameter settings and registration ■Accurate and precise measurement High accuracy: ± 0.2% F.S. ± 1 digit High-speed sampling: 1000Hz, peak value of hard ingredients can be accurately obtained with high responsiveness ■Easy data management Easy graph drawing using the included software (load-time and load-displacement versions) Automatic calculation of hardness, adhesiveness, cohesiveness, adhesive force, elasticity, gum properties, etc. ■Easy to clean Stainless steel measuring unit with removable tray, easy cleaning [Video is now available] A video of food texture measurement is available.
Target industry: Measurement/Analytical Instruments
The “MTS Series” is excellent at maintaining constant rotation speed, contributing to highly precise torque measurement. Applications include opening torque of PET bottles or pharmaceutical bottles, operating force of rotary switches and twisting strength of boards. The measurement provides high replicability of various rotating and twisting forces. Some options allow angle-torque analysis, which is useful for characteristic evaluation. [Features] ■Regulates the rotating speed for highly precise torque measurement ■Automatic testing based on the input parameters, measuring cap opening torque, angle-torque analysis (optional), etc., applicable for a wide range of measurements ■Offers testing of various samples with clamping attachments from our wide- ranging product lineup * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
The I Series is a driver torque meter for electric and torque drivers. Supports routine inspection with easy operation. Serial data output for data management. [Features] ■Torque measurement of electric and torque drivers ■Easy operation for routine inspection ■Serial data output for efficient data management * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
The IPTS-5N is a peel tester for embossed carrier tape, compliant with JIS standards. It provides high usability and accuracy. From placing the sample, measurement to generating graphs can be done in easy operations. With 6 speed settings, high speed testing is also achievable. Software is included for accurate graph drawing. [Features] ■Allows peel testing at high speed, a maximum speed of 1500mm/min ■Comes with drawing software to generate accurate graphs by processing data transmitted at 2000 data/second ■Embossed carrier tape peel testing partially compliant with JIS/IEC standards JIS C0806-3 (2014) “Packaging of Components for Automatic Handling” IEC 60286-3 (2013) “Packaging of Components for Automatic Handling” * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
The ACT Series is an electric crimp terminal tensile strength tester. With this tester, crimping force of crimp terminals in wire harnesses can be easily measured. The operation is simple: with just a single button, measuring and saving data can be done, which dramatically improves the efficiency of harness testing. Partially compliant with JIS C 2805, JIS C 5402-16-4, UL 486A-486B standards. [Features] ■2 test modes are available: "Break” (pull and break) and “Keep” (with conditions of time and load values) modes ■Up to 26 sets of test parameters can be saved and used repeatedly ■Includes software for data management and condition settings on PC ■Offers testing partially compliant with: JIS C 2805 (2010) " Crimp-type terminal lugs for copper conductors, 7.11 tensile strength test" ※Other tests compliant with JIS/UL standards are available [Video is now available] A video of wire harness crimping (pull and break) test is available. Please have a look. * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
The MED-ACU-2N is an attachment to evaluate the strength and sharpness of acupuncture needles. Set the attachment to the force gauge, press the needle against the iron plate to check the strength, or pierce an aluminum foil sheet to test its sharpness. [Features] ■Attachment for strength and sharpness evaluation of acupuncture needles ■Needle sizes: φ0.1 to 1mm ■Partially compliant with JIS Standards testing * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
The MED-IS-20N is a specified attachment for adhesive tack testing of adhesive plasters, etc. Used with a force gauge and test stand, it offers measurements partially compliant with some standards. [Features] ■Offers testing partly compliant with standards ・Partially compliant with ASTM D2979: 2016 “Standard Test Method for Pressure-Sensitive Tack of Adhesives Using an Inverted Probe Machine” ・The Japanese Pharmacopoeia 6.12. (3.4.), 17th revision: “Probe tack testing” * When used with dedicated force gauge and test stand. * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
The “TH Series” is a fixture for coating peel adhesion tests. It works through bonding its peeling head onto a coated surface and pulling it off. When used with dedicated force gauge, test stand and cable, we can offer testing systems partially compliant with specifications laid out in JIS K 5600-5-7(1999) “Testing methods for paints Part 5: Mechanical property of film, Section 7: Adhesion test (Pull-off method)” or ISO 4624(2002). [Features] ■Bond its peeling head onto a coating surface and pull it off to test the adhesion strength ■Offers testing systems partially compliant with JIS and ISO Standards * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
The “P90-200N Series” is suitable for 90° peel tests on adhesive tapes, sheets affixed to substrates. When used with dedicated force gauge, test stand, cable and software, we can offer testing systems compliant with a part of JIS Z0237:2000 “Testing methods of pressure-sensitive adhesive tapes and sheets, 10. Adhesive strength” or JIS C5016: 1994 “Test methods for flexible printed wiring boards, 8.1 Conductor Peeling Strength”. [Features] ■The slide table moves along with the test stand to keep the peeling surface at a constant 90° angle ■The recommended product configuration allows drawing of load-time graphs and automatic calculation of average peeling force in the selected range * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
The COF Series is a fixture to calculate both static and kinetic friction of coefficient in just one measurement. Can perform measurement of friction of coefficient on paper and film, drawing and printing graphs using the software included. When used with dedicated force gauge and test stand, you can perform tests partially compliant with JIS P 8147(1994), “Paper and Board - Determination of the Static and Kinetic Coefficients of Friction”, JIS K 7125 (1999) “Plastics - Film and sheeting - Determination of the coefficients of friction” and ISO 8295(1995). [Features] -Easy calculation of static and kinetic friction coefficients in just a single test with included software Able to draw and print graphs -Available in both vertical and horizontal test stands, based on the size of customer’s workspace * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
The “FC Series” is a film chuck whose grip materials and clamping methods are changeable according to the sample to be tested. When used with dedicated force gauge, test stand and connecting cable, you can perform tests partially compliant with JIS Z1711 (1994) “Polyethylene film bags, 8.4 heat seal strength test” and other wide-ranging tests. [Features] -Ideal for tensile strength tests, gripping thin samples such as films ・Apart from films, can be used for the measurement of thin samples such as adhesive tapes and magnetic cards -Wide line-up of models ・Lightweight model "FC-21": light weight, suitable for gauges of lower load values ・Standard model “FC-20/40”: up to 500N ・Single-side urethane type “FC-21U/41U”: prevents slipping and tearing of ultra-thin samples ・Lever model "FC-21UQ": single-side urethane type, can be set up in just one operation -Custom manufacturing for different widths, thicknesses and usages is also available upon request. * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
The HV Series is a vertical manual test stand for both tension and compression measurement. Wheel-operated handle guarantees reliable measurement. This series can be used for full-scale measurement at affordable prices. [Features] ■Screw feed method enables precise adjustment for stable thrust ■Designed to pair with various Imada force gauges ■Compact and lightweight simple tester at affordable prices ■When used with optional measuring instrument, travel distance can be measured simultaneously * For details, please download our PDF documents or feel free to contact us.
Target industry: Measurement/Analytical Instruments
The specialized measurement unit for testing or analyzing of Force-Displacement relationships. Force and displacement data is drawn in a graph at real time. Ideal for material characteristic tests and tactile tests.
Target industry: Automotive Parts Electrical/Electronic Parts Precision Equipment
This tester measures coefficient of static friction and kinetic friction The included software draws a graph and automatically calculates coefficient of static and kinetic friction. [Basic Information] - Capacity 2N(200gf)~10N(1kgf) - Accuracy +/-0.2%F.S. - Selectable unit: N/kgf/lbf
Target industry: Semiconductors/LCD/FPD Food/Beverage Paper Making/Paper Products
IMADA tension testing machine performs various tension test easily. The capacity is from 2N(200gf)~5000N(500kgf). Various tension tests are possible by the various shape/type fixtures. The possible tests are a film tension test, a wire breaking strength test, a connector exertion/ insertion test, a wine cork pull-out test and so on. It is an ideal tension tester for using at a production site or a research site by the easy operations and the desk-top size. There are many types and force ranges of testers such as simple and economical type according to your needs.
Target industry: Automotive Parts Electrical/Electronic Parts Precision Equipment
IMADA compression testing machine performs various compression test easily. The capacity is from 2N(200gf)~5000N(500kgf). Various compression tests, sticking test, durable test, bending test, are possible by the various shape/type fixtures such as a pin gauge and a round shape fixture. It is an ideal compression tester for using at a production site or a research site by the easy operations and the desk-top size. There are many types and force ranges of testers such as simple and economical type according to your needs.
Target industry: Automotive Parts Electrical/Electronic Parts Precision Equipment
IMADA peel tester performs various peeling test easily. The capacity is from 2N(200gf) to 200N(20kgf). There are 45 degree peel tester specialized a film cup container closure, ideal 90 degree/ 180 degree peel tester for adhesive tapes/ films. It is an ideal tester for using at a production site or a research site by the easy operations and the desk-top size.
Target industry: Automotive/Transport Machinery Automotive Parts Electrical/Electronic Parts
A force measuring instrument for compression/ tension/ peel. [Basic Information] - 2 models are available. ZTS series: Standard type. ZTA: Advanced model adding to other functions to ZTS. - Available for Compression/Tension. - Capacity: 2N(200gf)~5000N(500kgf) - High Accuracy +/- 0.2%Full Scale - Unit switching: N/kN/ kgf/ gf/ lbf/ ozf(*Depends on capacity.) - Peak hold function - Pass/Fail decision - USB connection to PC. Data acquisition software is included. - 8 types of fixtures for elementary compression/tension tests
Target industry: Automotive Parts Electrical/Electronic Parts Precision Equipment
[Basic Information] - It is available for compression and tension. - Capacity: 10N(1kgf)~500N(50kgf) - High accuracy +/-0.3%Full Scale - 3 types of model: N model/ kgf model/ lbf model - Peak hold function - 6 types of fixtures for elementary compression/tension tests
Target industry: Automotive Parts Electrical/Electronic Parts Precision Equipment
Force measuring instrument compression/tension/peel [Basic Information] - It is available for compression and tension. - Capacity: 2N(200gf)~500N(50kgf) - High accuracy +/-0.2%Full Scale - Unit switching: N/ kgf/ gf/ lbf/ ozf (*Depends on capacity.) - Peak hold function - Pass/Fail decision - It is possible to connect with a PC by RS232C connection. - 6 types of fixtures for elementary compression/tension tests
Target industry: Automotive Parts Electrical/Electronic Parts Precision Equipment
Various samples are available with the changeable fixtures. Accurate torque measurements are possible with 2000Hz high speed sampling rate. It is ideal for the torque transition analyses by the optional software which draws a graph in detail. [Basic Information] Available for CW/CCW torque. Data sampling rate is 2000Hz. Capacity 50N-cm~10N-m(1000N-cm) Accuracy +/-0.5%F.S±1digit. Selectable Unit N-m/ N-cm/kg-m/kg-cm/ lbf-in/ ozf-in (*Depends on capacity.) Peak hold function Pass/Fail decision function It is possible to output for external equipment such as a PC by USB connection. [Advance Functions of HTGA series] 1. Angle displacement input and output are possible when mounting a rotary encoder. 2. It can be stored the continuous data directly in a USB flash drive at 100Hz without PC. 3. 1st /2nd peaks detection.
Target industry: Electrical/Electronic Parts Machine Parts Consumer Products
The torque gauge for bottle opening/ closing torque measurements. Accurate torque measurements are possible with 2000Hz high speed sampling rate. It is ideal for the torque transition analyses by the optional software which draws a graph in detail. The table size and the clamp pin materials are selectable. It helps to hold various samples properly such as a tall sample, a slippery sample etc. [Basic Information] Available for CW/CCW torque. Data sampling rate is 2000Hz. Capacity 2N-m(200N-cm)~10N-m(1000N-cm) Accuracy +/-0.5%F.S+/-1digit. Selectable Unit N-m/ N-cm/kg-m/kg-cm/ lbf-in/ ozf-in Peak hold function Pass/Fail decision function It is possible to output for external equipment such as a PC by USB connection. [The Advance Functions of DTXA series] 1. Angle displacement input and output are possible when mounting a rotary encoder. 2. It can be stored the continuous data directly in a USB flash drive at 100Hz without PC. 3. 1st /2nd peaks detection. It is useful for unopened bottle opening test which have 2 types of torque peak. For example, 1st peak is open-starting torque and 2nd peak is twist-off torque of a tamper-evident band at the test.
Target industry: Medical Supplies/Biotechnology Consumer Products Food/Beverage
The turbine gas meter, more compact and light than positive displacement gas meters, is a highly accurate gas meter which was designed for city gas measurements and is capable of measuring large volumes of gas. Furthermore, the counting unit is equipped with an electronic temperature/pressure compensator (ETPC), which calculates the temperature and pressure inside the tubes detected by each sensor and displays totalized flow rate of the gas converted into the reference state. ○High Accuracy and Wide Measurement Range ○Easy Maintenance and Inspections ○Enhanced Urability ○Compact Design
Target industry: Electricity/Gas/Water
The vortex signal is detected with high accuracy by ultrasonic wave, totalized flow rate and momentry flow rate are displayed on site and both analog output and pulse output are available. ●Connection Size: 1, 11/2, 2, 3, 4B ●Applicable Fluid:Liquids (Excepting Liquids Incompatible with SUS316) ●Accuracy: ±1.0%RD(±0.5%RD) ●Flow Rate Range:0.6 ~ 20m3/h ●Fluid Temperature: −20 ~ 160℃(Waterproof Models) −20 ~ 120℃(Explosion-proof Models) ●Fluid Pressure:5.0MPa ●Piping Connection: Wafer Type, Flange Type
Target industry: Semiconductors/LCD/FPD
Since the parts in contact with liquid are integrally molded in PEEK resin with excellent corrosion resistance and have a completely pocketless structure, PEEK resin series are ideal for measuring ultrapure water, chemical fluids and similar fluids. ●Connection Size: 1/2, 1B ●Applicable Fluid: Chemical Fluids, Corrosive Fluids, Ultrapure Water etc. ●Accuracy: ± 3% RD (± 1% RD is also possible) ●Flow Rate Range: 1.7 ~ 220L/min ●Fluid Temperature: 0 ~ 140℃ ●Fluid Pressure: 0.39 ~ 0.98MPa ●Connection Method: Screw Fitting, Wafer-style
Target industry: Semiconductors/LCD/FPD
Since the parts in contact with liquid are integrally molded in PPS resin not containing glass and with excellent corrosion resistance and there are no sealed parts or pocket parts other than the pipe-connecting parts, PPS resin series are ideal for measuring chemical fluids, pure water incompatible with fluid contamination and similar fluids. ●Connection Size: 1/2, 3/4B ●Applicable Fluid: Water, Pure Water, Chemical Fluids Compatible with PPS resin etc. ●Accuracy: ±3%FS ●Flow Rate Range: 3.0 ~ 120 L/min (in case of water) ●Fluid Temperature: 0 ~ 50℃ ●Fluid Pressure: 1.0MPa ●Connection Method: Union Fitting (TS type)
Target industry: Semiconductors/LCD/FPD
The turbine meter is smaller and lighter than other flowmeters and it allows highly accurate measurement over a wide flow rate range. It is an iconic turbine meter that is adopted for a wide range of uses including the trading process control and process management in various field. 〇Being made of stainless steel, it has excellent corrosion resistance and it can be used with a wide range of liquids, including water, petroleum and chemical fluids. 〇Since the housing has a cylindrical shape which is highly resistant to pressure, it can also be used for measuring high pressure fluids. (Up to 343 MPa.) 〇Its compact structure ensures ease of use and maintenance. Specifications of Intelligent Indicator Unit Display: Integrated, Reset, Momentary Flow Rate, Temperature etc. Functions: Linearization, Temperature Correction, Coefficient Correction, Correction of Measuring Chamber’s Thermal Expansion etc. Output: Open Drain, Voltage Pulse, Current Pulse, Analog Output etc. Communication: Smart Communication Explosion-proof Design: Explosion-proof Structure(ExdⅡBT4)
Target industry: Industrial Electrical/Control Equipment
The pulse sensor CCG flowmeter is a volumetric flowmeter for measurements of microscopic quantities of various fluids like catalysts, additives, and perfumes. Being made of stainless steel, it also ensures superior corrosion resistance against special fluids. Intelligent counting unit is a standard equipment. ●Connection Size:1/2B ●Applicable Fluid:Water, Chemical Solutions, Foodstuff, Chemical Fluids, Petroleum etc. ●Accuracy:±0.5%RD ●Flow Rate Range:2~300L/h ●Fluid Viscosity:5mPa·s or less ●Fluid Temperature:−10~80℃ ●Maximum Working Pressure:1.96MPa ●Materials:Main Body SCS14 / Rotor SUS316
The vertical-type non-fluctuation flowmeter is a volumetric flowmeter that directly measures the flow rate using two sets of 45º combination rotors. ○Low Vibration and Low Noise ○High Precision and Wide Range of Flow Rate ○Easy to Maintain ○Less Pressure Loss ○Enhanced Shaft Bearing’s Durability ‐‐ ●Connection Size: 6~12B ●Applicable Fluid:Crude oil, Petroleum Derivatives etc. ●Accuracy:± 0.5%RD or ± 0.2%RD ●Flow Rate Range : 8~1,500m3/h ●Fluid Viscosity:150 mPa·s or less ●Fluid Temperature:0~150℃ ●Maximum Working Pressure:2.45MPa ●Materials:Main Body SCPH2 Rotor AC7A or FC200 ●Available with Intelligent Counting Unit
Target industry: Industrial Electrical/Control Equipment
Since the parts in contact with liquid are integrally molded in PFA resin with excellent corrosion resistance and there are no sealed parts or pocket parts other than the piping connecting parts, PFA series are ideal for measuring chemical fluids, corrosive fluids, ultrapure water and similar fluids. ●Connection Size: 3/8, 1/2, 3/4, 1B ●Applicable Fluid: Chemical Fluids, Corrosive Fluids, Ultrapure Water etc. ●Accuracy: ±3%FS, ±3%RD ●Flow Rate Range: 0.3 ~150L/min ●Fluid Temperature: 0 ~ 100℃ ●Fluid Pressure: 0.5 ~ 1.0MPa
Target industry: Semiconductors/LCD/FPD Industrial Electrical/Control Equipment
The ultrasonic gas meter adopts a method based on measuring the difference in propagation time by alternately repeating transmission and reception with a pair of ultrasonic sensors as the time difference of ultrasonic waves varies with flow velocity; this allows for extreme accuracy of measurement and a wide range of flow rate. ○High Accuracy and Wide Range of Flow Rate (±1% RD, Flow Rate Range1: 40) ○Responds Quickly to Flow Rate Change ○No Moving Parts ○Explosion-proof Design ○Self-diagnostic Function ○Communication Function
Target industry: Electricity/Gas/Water
The gas meter is a volumetric flowmeter for gases which directly measures the flow rate by using two sets of rotors. Since the two sets of rotors rotate without making contact, it is hardly subject to accuracy due to equipment deterioration and can measure with high precision and over a wide flow volume range. Furthermore, the counting unit is equipped with an electronic temperature/pressure compensator (ETPC), which calculates the temperature and pressure inside the tubes detected by each sensor and displays totalized flow rate of the gas converted into the reference state. ○High Accuracy and Wide Measurement Range ○Wide Pressure Range and Less Pressure Loss ○Low Sensitivity Flow Rate ○Built-in Automatic Fueling Function
Target industry: Electricity/Gas/Water
The small-scale oil flowmeter is a volumetric flowmeter employing a gear-type rotor specifically designed for oil and which can be used for a wide range of measurements, for example in measuring engine oil or fuel oil for marine vessels and boilers. Furthermore, flowmeters specifically designed for measuring high-temperature fuel like ship fuel are available. ■Electronic Counting Unit Digital Display Totalizing counter, reset counter and momentary flow rate are alternatively displayed. Furthermore, it is possible to set the momentary flow rate at 1 hour or 1 minute intervals. Multifunctional Counting Unit Ramified Flow Rate Display, Forward/Reverse Detection, Self-diagnosis,Battery Consumption Alarm etc.
Target industry: Measurement/Analytical Instruments
A wide range of high-performance pressure control equipment for controlling pressure. Several types of control devices are needed to cover all requirements. [Product lineup] • Spectroscopic ellipsometer • Reflectance film thickness meter • Laser ellipsometer
Target industry: Industrial Machinery/Devices
FC-R7800 series delivers precise flow control, as well as the high leak integrity of metal seals to suit the majority of gas-controlled applications. [Benefits] • Fast response – less than 1 second flow-settling time between set points • Outstanding reliability • Easy integration – with standard connectors and critical dimensions • Superior results – high quality thin film characteristics
Target industry: Resin/Plastic/Rubber Products Machine Parts
As the field-proven standard for a range of applications, Aera FC-7700 series delivers precise flow control, while offering the economic benefits of elastomer seals. This series provides high reliability and superior performance for process and equipment engineering work. [Benefits] • Fast response – less than 2 second flow-settling time between set points • Easy integration – with standard connectors and critical dimensions
Target industry: Resin/Plastic/Rubber Products Measurement/Analytical Instruments Industrial Machinery/Devices
Target industry: Automotive Parts Machine Parts Aerospace Related
Target industry: Automotive Parts Machine Parts Aerospace Related
Surface mount type jumper elements is also known as zero ohm resistor which structually has resistance around several tens miliohm as well as the limit of maximum allowable current. KOA's product lineup offers large current type jumper chip resistors, TLRZ and SLZ, to match our customers request for surface mount type jumper chip enabling to impress larger current. Applications of large current jumpers in the large current type circuits like power supplies are; replacement of unnecessary parts like fuse or current sense resistors caused by design change, circuit function shift by product version change, connection of circuit block(separated circuit block for malfunction analysis) and large current pattern bypass(low impedance connection, noise, unnecessary radiation measures), etc. - Metal plate type TLRZ can be applied by max. 40A current by max. 0.2mΩ. 1608 to 3216 size. - Molded type SLZ1, 44A by 6332 size, 0.5mΩmax. Applications include power supplies of printers, PC/PC peripherals like SSD, home appliances, automotives and industrials.
Target industry: Automotive/Transport Machinery Industrial Machinery/Devices Consumer Electrical Appliances
KOA offers wide product lineup of shunt resistors appropriate for power supply control and overcurrent sensing of power supplies and batteries of inverters and motor controls of automotive, industrial ad home appliances. Our new metal plate type shunt resistor products HS series now achieves current sensing up to 600A. and others plate type shunt resistor products PSJ/PSG series now achieves current sensing up to 245A. - PSJ, size 10x5.2mm, offers power rating up to 12W, 0.2mΩ, T.C.R.±75x10-⁶/K~. - PSG is four-terminal construction and achieves high precision sensing by T.C.R.±50x10-⁶/K. - New molded type product SLN5 features high heat dissipation construction, leading to strengthened power rating from 3W to 7W by same size of the conventional product(11.5x7mm). Stress relaxation type electrode construction gives us excellent heat cycle characteristics even in large size. KOA's unique TLR series has non trimming construction to give low inductance and precise current sensing. The product lineup offers size 6332 with 3W to size 2012 with 1W, high power by small size and high precision offering TCR 50x10-⁶/K.
Target industry: Automotive/Transport Machinery Industrial Machinery/Devices Consumer Electrical Appliances
This quality level sensor is made in Japan and uses pulsed microwave radar. It’s ideal for the measurement of powders, granules and blocks. This compact system employs high frequency microwaves, which contributes to great directivity, and ensures reliable level measurement. Adjustment is also made easy by merely inputting simple parameters. Air purge function comes standard and various other useful options, such as angle adjustment, are available for a wide range of applications.
Target industry: Mining
Widely used as a standard gauge for extra high pressure water. Unlike our other two types of bicolor water gauges, this model has a circular viewing window. Water level is indicated in two colors, allowing observation at site or monitoring on a color monitor screen at a distance. An illuminator is required to display in two colors; water section is in blue and steam section is in red.
Target industry: Other
Widely used as a standard gauge for high pressure water. Water level is indicated in two colors, allowing observation at site or monitoring on a color monitor screen at a distance. An illuminator is required to display in two colors; water section is in blue and steam section is in red.
Target industry: Other
Widely used as a standard gauge for low/medium pressure water. Water level is indicated in two colors, allowing observation at site or monitoring on a color monitor screen at a distance. An illuminator is required to display in two colors; water section is in blue and steam section is in red.
Target industry: Other
[Features] - Releases a float with a built-in magnet into the metallic connecting tube (stand pipe) located outside the tank - Control structure outside the metallic piping is magnetically driven to display the liquid level - Our installations for the water heaters of thermal systems at power plants have increased considerably
Target industry: Other
General purpose model with excellent sealing and safety. Flexible visual directions on the level indicator window.
Target industry: Other
Sight flow indicators (sight glass) are placed in the piping to allow visual observation of flow, stoppage, speed and amount of fluid. Some indicators have flappers or balls fitted inside to provide easy visual observation. A wide variety of installation methods is available.
Target industry: Other
Widely used as a standard gauge for medium/low pressure water. Types T-10 and T-20 are also used as level gauges. To lengthen the visible portion of the level indicator, gauges can be connected, either linearly or alternately.
Target industry: Other
This is a standard high pressure water gauge widely used in the shipping industry, power plants and elsewhere. The structure avoids placing holding force on the gauge glass, and a special graphite gasket is used for better sealing effect; thus it won’t easily break or leak.
Target industry: Other
Widely used as a standard-use level gauge To lengthen the visible portion of the level indicator, gauges can be connected, either linearly or alternately.
Target industry: Other
Simple, yet strong and safe level gauges To prevent fluid leakage in case of breakage, there’s a ball check valve fitted inside.
Target industry: Other
- Compared to steel, greater anti-abrasion, more durable over time with no dimensional changes - No rust or corrosion, easy maintenance - Contains no magnetic materials so no worries about magnetization - Less plastic deformation caused by scratches and dents, with no burrs or swellings - Light-weight and provides easy measurement - Ring sizes are laser marked on gauges
Target industry: Measurement/Analytical Instruments Industrial Electrical/Control Equipment Industrial Machinery/Devices
All From 97 1 - 80 items are displayed