- English
- 日本語
Machine tool/Processing machine/Molding machine/Peripheral equipment
Machine tool/Processing machine/Molding machine/Peripheral equipment |
|
|---|
- Automotive/Transport Machinery
- Automotive Parts
- Consumer Electrical Appliances
- Semiconductors/LCD/FPD
- Electrical/Electronic Parts
- Industrial Machinery/Devices
- Machine Parts
- Industrial Electrical/Control Equipment
- Precision Equipment
- Aerospace Related
- Iron and steel industry/Metal material
- Metallic Products/Parts
- Resin/Plastic/Rubber Products
- Agricultural Machines
- Construction/Mining Machinery
- Nonferrous metals
- Consumer Products
- Garments/Textiles
- Other Manufacturing
- Construction
- Energy
- Other
All From 92 1 - 80 items are displayed
-
Brother Compact Machining Center SPEEDIO R650X2
- Catalogue
R650X2 is equipped with the“ QT table”, Brother’s original high-speed 2-side pallet changer. The model demonstrates high productivity, and also provides the largest machining area among "QT table" machines, enabling mounting large jigs. The release of this new model will further expand the world of the SPEEDIO. Additionally, R650X2 has a new specification of 40-tool storage capacity, and these new development will further extend the world of SPEEDIO.
Target industry: Automotive Parts Machine Parts Metallic Products/Parts
Brother Commercial Thailand, LTD. Machine Tools Technical Center
-
Brother Compact Machining Center SPEEDIO R450X2
- Catalogue
A pallet changer is standardly equipped for This model of series that achieve overwhelming productivity. Quest for "Wasted Time = Zero"
Target industry: Automotive Parts Machine Parts Metallic Products/Parts
Brother Commercial Thailand, LTD. Machine Tools Technical Center
-
The “L & M-Series” Concrete Products Machine
The “L & M Series”, designed with simple and heavy-duty structure. The “L & M Series” Machine is designed to run continuously for a long time without failure, reliable and easy operation and low cost maintenance. Using medium pressure hydraulic system helps easy maintenance. Its hydraulic parts could be available any countries in the world. [Features] • Easy operation and maintenance. • Medium-pressure hydraulic system is used for safety operation. • Easy replacement of hydraulic parts, available in most countries • Easy and simple operation to produce high quality concrete products. • For details, please download our catalog or contact us
Target industry: Construction Industrial Machinery/Devices
-
The “J-Series” Concrete Products Machine
The “J-Series” is the most economical concrete products machine to produce multiple concrete product line. Economical but high-quality and multiple concrete products, such as architectural products, segmental retaining wall products, paving stone and civil engineering products, can be produce on this series of machine. With smallest investment, it can produce quality Concrete Products, Concrete Bricks, Retaining Wall Products, Landscape and Hard scape products. Simple and Heavy-duty structure of machine achieve rigid and reliable equipment quality. It helps simple operation and easy maintenance. That allows reliable and continuous operation. [Features] • Economical price range. • Rigid design • High-quality Concrete Products production • Simple operation and easy maintenance. • Optional Face Feed Drawer is available for dual-layer paving stone. • For details, please download our catalog or contact us
Target industry: Construction Industrial Machinery/Devices
-
Concrete Products Machine “PS-V Series: Multil-purpose Concrete Products Machine with vibrating table”
The “PS-V Series: Multi-purpose Concrete Products Machine with vibrating table” is a high-performance and high-efficiency Concrete Products Machine, which produces Architectural block, high-end decorative products, civil engineering blocks, segmental retaining wall products, paving blocks and other specific blocks. The automatic mold changer shortens mold change time for higher production rate. In addition, its powerful Variable Vibration System guarantees material feeding and compaction with the most suitable amplitude and frequency. Its heavy-duty design results its high-speed and continuous operation for 24-hour, 6-day-a-week. [Features] • Versatility proven in the worldwide market. → It keeps the production rate up high with good production efficiency. • Built-in Horizontal Care Puller Device available as an option. → It also can be used as a Pull Plate Device for paving block. • Various type pf information from Control Panel. → Used for production control and Mold Life management • It keeps up to 99 sets of production recipe • Touch-screen user interface User-friendly operation • For details, please download our catalog or contact us
Target industry: Construction Industrial Machinery/Devices
-
High-speed Concrete Products Machine “S Series: High speed Concrete Products Machine”
TIGER’s innovative high-speed Concrete Products Machine, ”Model S-3: High speed Concrete Products Machine,” continuously produces three pcs of 19-cm-wide blocks at a time by speed of 6.0 seconds per cycle. Simple and heavy-duty design allows highest speed and high production rate. Operation of model S series is simple, easy and low maintenance cost. Other manufactures mold can be used with small changes. [Features] • Simple structure for easy operation and easy maintenance. • Powerful mold vibrator combined with servo motor. • Adjustable frequency vibration allows best vibration for the materials. • Simple structure with no clutches or breaks on vibration System. • For details, please download our catalog or contact us
Target industry: Construction Industrial Machinery/Devices
-
Concrete Products Machine “TG Series: Multi-purpose concrete products machine with vibrating table”
The “TG Series: Multi-purpose concrete products machine with vibrating table” is a series of high-performance and high-efficient concrete products machines which produce concrete blocks, segmented Retaining Wall Block, civil engineering blocks, paving blocks and other specific-purpose blocks. The automatic mold changer shortens mold change time for higher efficiency produstion. In addition, its powerful Variable Vibration System guarantees material feeding and compaction with the most suitable amplitude and frequency. Its heavy-duty design results its high-speed and continuous operation for 24-hour, 6-day-a-week. [Features] • Versatility proven in the worldwide market. → It keeps the production rate up high with good production efficiency. • Built-in Horizontal Care Puller Device available as an option. → It also can be used as a Pull Plate Device for paving block. • Various type pf information from Control Panel. → Used for production control and Mold Life management • It keeps up to 99 sets of production recipe • Touch-screen user interface → User-friendly operation • For details, please download our catalog or contact us
Target industry: Construction Industrial Machinery/Devices
-
Concrete Products Machine “D-Series”
The TIGER Model D series machine is the middle size production machine. Economical price range based on simple, reliable and heavy-duty design. The TIGER Model D series Machine is suitable for beginner of the concrete products industry just to start-up concrete products business in the market. Its high efficiency production rate helps you in the market. Medium-pressure hydraulic system is used, and it helps safety operation. Quade vibration System (one motor in each corner of mold-total four motor) is used. Each motor rotate end of shafts-two shafts x 2 ends, total four motor, and makes vigorous vibration force to compact material in the mold. [Features] • Economical price range • Simple and Easy operation • Reliable and heavy-duty design results simple and easy maintenance. • Replacing small plant for more capacity in lower cost. • Efficient operation makes high productivity. • For details, please download our catalog or contact us
Target industry: Industrial Machinery/Devices Construction
-
Brother Compact Machining center SPEEDIO F600X1
- Catalogue
Brother Compact Machining center SPEEDIO F600X1 While the applicable range of compact machining centers is spreading, "our enthusiasm to further approach a high-end model machining level " has taken shape. "High machining capabilities" have been achieved, in addition to "high productivity" features of SPEEDIO series.
Target industry: Industrial Machinery/Devices
Brother Commercial Thailand, LTD. Machine Tools Technical Center
-
Brother Compact Machining center SPEEDIO R650X2 40 tool magazine
- Catalogue
Brother Compact Machining center SPEEDIO R650X2 40 tool magazine New Model Equipped with 40-Tool Magazine
Target industry: Industrial Machinery/Devices
Brother Commercial Thailand, LTD. Machine Tools Technical Center
-
NC cutting machine P-CAM100C/120C/160C/180C
- Catalogue
SHIMA SEIKI’s new P-CAM100C, P-CAM120C, P-CAM160C, and P-CAM180C NC cutting machine (computerized cutting machine) are ideal for cutting sheets of Carbon- and Glass-Fiber Reinforced Plastic (CFRP and GFRP) pre-impregnated composites (prepregs). In addition to conventional drag knife and reciprocating knife, ultrasonic knife can also be selected, allowing cutting of a wide range of materials such as rubber, leather, vinyl, thermoplastics, adhesive materials and water-repellent fabrics up to 20mm in thickness and in multi-ply applications. Cutting depth and height are automatically adjusted to aid in longevity of the blade. Furthermore various measures are taken in consideration of the type of materials to be cut on this machine, such as dust prevention, auto knife cleaning and cutting mat laydown. Double-cut prevention function and special cutting brushes are standard. Cutting length begins at a compact 880mm, while the cutting area can be customized for long items. By using the optional barcode scanner, operation accuracy and efficiency is increased significantly by preventing mistakes upon pattern data input. Machine installation can be performed in one-piece or in separate sections for smaller spaces. Together with SHIMA SEIKI’s SDS-ONE APEX3 CAD system, P-CAM100C, P-CAM120C, P-CAM160C, and P-CAM180C provide smooth and efficient computer-to-cutting for a variety of industries from automotive and aerospace to industrial materials.
Target industry: Automotive/Transport Machinery Aerospace Related Garments/Textiles
-
NC cutting machine P-CAM130C/160C
- Catalogue
SHIMA SEIKI's P-CAM130C and P-CAM160C NC cutting machine (computerized cutting machine) is ideal for cutting rolls of Carbon- and Glass-Fiber Reinforced Plastic (CFRP and GFRP) pre-impregnated composites (prepregs). In addition to conventional drag knife and reciprocating knife, ultrasonic knife can also be selected, allowing cutting of a wide range of materials such as rubber, leather, vinyl, thermoplastics, adhesive materials and water-repellent material up to 20mm in thickness and in multi-ply applications. Cutting depth and height are automatically adjusted to aid in longevity of the blade. Furthermore various measures are taken in consideration of the type of materials to be cut on this machine, such as dust prevention, auto knife cleaning and double-cut prevention function. A conveyor system with special cutting brushes is used for the cutting table, allowing highly efficient production while delivering roll material. Pickup table and automatic labeling device are available as options. By using the optional barcode scanner, operation accuracy and efficiency is increased significantly by preventing mistakes upon pattern data input. Machine installation can be performed in one-piece or in separate sections for smaller spaces. Together with SHIMA SEIKI’s SDS-ONE APEX3 CAD system, P-CAM130C and P-CAM160C provides smooth and efficient computer-to-cutting for a variety of industries from automotive and aerospace to industrial materials.
Target industry: Automotive/Transport Machinery Garments/Textiles Consumer Products
-
Multi-Ply Fabric Cutting Machines (NC cutting machine) P-CAM series
- Catalogue
Having established a reputation for high-efficiency, productivity and quality, SHIMA SEIKI's P-CAM multi-ply computerized cutting machine (NC cutting machine) lineup has undergone further improvement. The new lineup features increased cutting-head clearance to enable easier loading of multi-ply fabric before suction. A renewed knife mechanism yields higher strength and durability. Available electrically controlled high-output turbofan and presser foot both contribute to stable cutting by fabric type. A new cutting head features lower vibration and noise for improving the work environment. A stiffer frame, one-touch drill attachment and revised controller position all enhance operability and ease of maintenance. The multi-ply computerized cutting machines (NC cutting machines) P-CAM machines are the perfect choice for flexible high-volume production in a new era of global apparel production, as well as for such other applications as workwear, sewing, knit manufacturing, automotive, industrial material, container bag, flexible container bag, cloth container, carbon fiber fabric, carbon cloth, aramid fiber, woven fabric, tent, canvas, nonwoven fabric, filter, felt, and furniture.
Target industry: Automotive/Transport Machinery Automotive Parts Garments/Textiles
-
Single-Ply Cutting Machines P-CAM100/160/200
- Catalogue
SHIMA SEIKI’s astonishingly quick and efficient single-ply cutting machines (NC cutting machine) are perfect for small- and minimum-lot jobs such as made-to-measure, samplemaking, supplemental production of popular items and educational applications. They offer a choice of cutting width: P-CAM100 features a cutting width of 100cm; P-CAM160 is 160cm wide; and new to the lineup, P-CAM200 is 200cm wide. Among the many advantages are their compact size and surprisingly large cutting area, not to mention smooth and quiet operation. Ultra-fast movement and a self-sharpening circular knife offer high cost-performance. And the new integrated control monitor features a touch-sensitive panel with scheduling functions to boost productivity. Maintenance conditions are greatly improved through reinforced components and better accessibility as well. The extremely fast and flexible P-CAM100, P-CAM160, and P-CAM200 are the perfect investment for a new era in apparel production, work clothes, sewing industry, knit manufacturer, tailor, SPA, industrial material, container bag, flexible container bag, cloth container, carbon fiber fabric, carbon cloth, aramid fiber, woven fabric, tent, canvas, nonwoven fabric, filter, felt, furniture related industry, and educational applications.
Target industry: Garments/Textiles Automotive/Transport Machinery Other Manufacturing
-
Premium Solution Improved Productivity (Hyper-Surface, Dynamic Tool Load Control, B-axis Turning)
- Catalogue
●Hyper-Surface Hyper-Surface, in addition to the Sculptured-Surface Adaptive Acceleration Control featured in the previous Super-NURBS, detects CAM-output machining data “disturbance,” and corrects that on the Okuma CNC to improve surface quality while maintaining the required shape accuracy. ●Dynamic Tool Load Control DTLC suppresses chipping of insert tools on difficult-to-cut materials like titanium alloy, to achieve stable processing and longer tool life. ●B-axis Turning Simultaneously controlled X, Z and B axes of a multitasking machine efficiently turns curved surfaces.
-
Premium Solution Measuring and Compensation (Auto Attachment Head Compensation, NC Gage, C-axis Torque Limit）
- Catalogue
●Auto Attachment Head Compensation An easy way to compensate for attachment head rotational errors — automatically. Periodically setting rotational offsets help maintain high machining accuracy. ●NC Gage Measure shapes on the machine to calculate geometric error and virtual positions. Intuitive teaching operations make it easy to create a measurement program. ●C-axis Torque Limit Here is how to get C-axis zero offsets: by mounting a stopper on the turret, and having it contact a keyway or notch, to read the C-axis torque fluctuations.
Target industry: Automotive Parts
-
Process-Intensive (Gear Machining Package, Turn-Cut, Flat-Tool Grooving)
- Catalogue
● Gear Machining Package Highly accurate gear cutting achieved with multitasking machines and 5-axis machining centers.Output programs just by entering the gear data. ● Turn-Cut Turning done with a rotary tool spindle. Turning with tilting axis machining consolidated in machining centers and multitasking machines. ● Flat-Tool Grooving By finishing the groove bottom with a flat tool, it is possible to obtain a machined surface where air does not leak easily. This effectively improves the surface roughness of seal grooves.
Target industry: Automotive Parts
-
Premium Solution Threading (Variable Spindle Speed Threading, Variable Lead Threading, Thread Phase Matching)
- Catalogue
●Variable Spindle Speed Threading：Perfectly synchronized feed axis with change of spindle speed.Thread pitch accuracy is maintained with spindle speed changes during threading. ●Variable Lead Threading：How the pitch can be increased or decreased for every revolution ●Thread Phase Matching：For previously done threads, simply align the tool — visually — to start a rethread.
Target industry: Automotive Parts
-
Dramatically reduced machining time「UWF-150Ⅲ」
- Catalogue
【Features】 ・Punching with two different diameters in a single process.(With Punch part expansion option) ・Intuitive large 12.1 inch touch screen. ・Changing unit-type dies is easy and rapid. ※ Please kindly refer to the catalog or feel free to contact us for more details.
Target industry: Other Manufacturing
-
Changes Four tools automatically 「CBF-3015Ⅱ-ATC」
- Catalogue
1.The ATC device reduces tool change setup time. 2.The automatic sizing device performs processing positioning,reducing machining time needed. 3.The gripper for feeding material features an automatic retraction function. 【Features】 ・Equipped Automatic tool changer. ・Enable stable machining by adopting servo motor and ball screw for the feed axis. ・Compatible with carbide-tipped blades and high-speed steel blades ・Delivers more efficiency with optional Loader and Unloader. ※ Please kindly refer to the catalog or feel free to contact us for more details.
Target industry: Automotive Parts
-
Connect Plan
● Okuma’s Connect Plan is a system that provides analytics for improved utilization by connecting machine tools and visual control of factory operation results and machining records. ● Simply connect the OSP and a PC and install the Factory Monitor suite on the PC to see the machine operation status from the shop floor, from an office, from anywhere. ● The Connect Plan is an ideal solution for customers trying to raise their machine utilization.
Target industry: Automotive Parts
-
2-Spindle Horizontal CNC Lathe 2SP‐2500H
● The 2SP-2500H uses the Thermo-Friendly Concept, which provides high dimensional accuracy even in long-run and continuous mass production machining. ● Okuma offers systems that meet customer needs, such as production lines requiring a minimum of space with stackers for both materials and finished parts, or more advanced automated lines that include post-process gauging and air blowers.
Target industry: Automotive Parts
-
250HMD
- Catalogue
This fully automatic ridged grinder features automatic control of all three longitude, transverse and vertical shafts as well as mirror finish grinding.
Target industry: Automotive Parts Machine Parts Precision Equipment
-
250H1-ECO
- Catalogue
This is an automatic grinder with a servo motor drive on the transverse shaft of the 250M model. Compared to conventional hydraulic drive types, 60% less electricity consumption is required. This fully automatic surface grinder is particularly developed for die regrinding and plate processing.
Target industry: Automotive Parts Machine Parts Precision Equipment
-
400HMD
- Catalogue
Fully automatic grinder particularly developed for die regrinding and plate processing.
Target industry: Automotive Parts Machine Parts Precision Equipment
-
818PC-NC
- Catalogue
Based on the technologies of our best-selling 250M model (fully automatic), we have developed a PC controlled NC grinder. Powered by our original processing software, we meet our customers’ every need.
Target industry: Automotive Parts Machine Parts Precision Equipment
-
818PC-NCL
- Catalogue
Having a liner motor installed to the transverse drive, high-speed and short-stroke reverse motion is realized to shorten processing time. The accuracy of transverse positioning is ± 1 μm.
Target industry: Automotive Parts Machine Parts Precision Equipment
-
525PC-NC
- Catalogue
The grinding range is 250 mm in longitude and 600 mm in transverse. We have developed one size larger from our 250M model as a solution for customers who are looking for a bigger table area.
Target industry: Automotive Parts Machine Parts Precision Equipment
-
525PC-NCL
- Catalogue
Having a liner motor installed to the transverse drive, high-speed and short-stroke reverse motion is realized to shorten processing time. The accuracy of transverse positioning is ± 1 μm.
Target industry: Automotive Parts Machine Parts Precision Equipment
-
300PC-NC
- Catalogue
This newly developed PC controlled NC grinder has a table range of 350 mm in longitude and 740 mm in transverse. Powered by our original processing software, we meet our customers’ every need.
Target industry: Automotive Parts Precision Equipment Machine Parts
-
250H1
- Catalogue
Automatic grinder with a hydraulic driven transverse shaft installed on the 250M model.
Target industry: Automotive Parts Machine Parts Electrical/Electronic Parts
-
250M
- Catalogue
Using our outstanding technological expertise and experience as a precision die manufacturer, we’ve developed this ergonomic manually-controlled precision grinder.
Target industry: Automotive Parts Machine Parts Electrical/Electronic Parts
-
Slitter “CN-350”
- Catalogue
- Distributor required
- Partnership required
[Features] • Easy tentering when the slit width is changed, within 5 minutes after size change • The score cut method allows a clean cross-section finish • Vertical design saves space • The winding shaft employs a dual-axis air shaft system and allows easy, single-operation paper tube mounting.
Target industry: Resin/Plastic/Rubber Products
-
Roll cutter “CX-301A”
- Catalogue
- Distributor required
- Partnership required
[Features] 1. A high-speed motor is mounted to move in all directions Compared to conventional machines, this product contributes to 1.5 to 2 times more production volume. 2. Automatic diameter detection of fabric rolls Even when the diameter changes, the cutter performs the shortest possible stroke, preventing accidents caused by gaps between different cycle times or incorrect adjustments. 3. 3-step automatic speed shifting Cutting starts slowly and gradually speeds up. After the paper tube is cut, the speed reduces again, and when the cutting is completed, the machine returns to the original position at full speed. 4. Automatic chucking 5. Automatic shaft base lifting (by pneumatic force) 6. Automatic polishing device (CVT) After every pre-defined number of operations (CVT), the cutter is polished using a Borazon grinding stone (for long life use). One-touch with easy angle adjustment. 7. Dimension and item number settings (no limit on the number) One-touch operation on a color LCD touch panel 8. Automatic detection of the fabric edge By just pressing a button, the cutter automatically moves to the edge of the fabric, ready for operation. 9. Automatic speed reduction on the chuck side When the end of the fabric is approaching, cutting speed is automatically reduced to avoid fabric misalignment, which commonly happens when only little fabric remains. This function guarantees a perfect finish without any dimension errors right to the very end of the fabric.
Target industry: Garments/Textiles
-
Super Tite-Lock Milling Chuck CT･SA
- Catalogue
Milling chuck yang memiliki kekerasan dan kekuatan genggam setingkat milling chuck pada umumnya ditambah desain langsing yang compact.
-
"R"Zero Holder for Large Diameter CTZ
- Catalogue
Our “R” Zero Holder CTZ for large diameters can easily, accurately and quickly adjust runout of cutting edges to zero using our original 4-point adjustment system, no matter where the maximum runout point is. Thus, it is suitable for finishing large- diameter reaming.
-
"R"Zero Holder HDZ
- Catalogue
Our “R” ZERO Holder makes possible a stable hole diameter, better surface roughness and prolonged cutting tool life due to the “zero” adjustment of the cutting edge runout.
-
HSK･T Turning Tool
- Catalogue
This is an interface to maximize cutting ability of multi-tasking machines. There are models for external/cutting-off, for external/end-facing, for end-facing, for boring bar and for drilling.
-
Power Hydro Chuck PHC･A
- Catalogue
Power Hydro Chuck PHC gives our hydro chuck its reputation for high-precision and stable chucking as well as easy collet holding. It can be replaced by a collet holder, which has been used as the standard holder until now with various internal diameter sizes and a wide variety of processing uses.
-
Slim Hydro Chuck PHC･S
- Catalogue
Holders suitable for drilling and reaming without interfering with work piece as well as 5-axis finishing end mill processing
-
NT TOOL, the best protection against rust!
- Catalogue
This tool holder is treated with special rustproofing, including part of the taper.
-
Collet Holder MDC
- Catalogue
- Distributor required
- Partnership required
Target industry: Automotive Parts Machine Parts Aerospace Related
-
Collet Type Floating Holder FH-ST-HDC･A
- Catalogue
- Distributor required
- Partnership required
Target industry: Automotive Parts Machine Parts Aerospace Related
-
Drill Holder with Easy Tool Length Adjustment SDM
- Catalogue
Length-adjustable Drill Collet Holder can adjust the drill projection by manually rotating the guide ring. Protrusion can be adjusted while measuring the height, which allows easy setting of the target value.
-
Synchronous Tap Holder STM
- Catalogue
This is a synchronized tapping chuck which is securely holding the tap shank with collet.
-
Next-Generation Super Multitasking Machine LASER EX series
Laser metal deposition with the application of leading edge laser technology, plus next-generation super multitasking machines that perform work all the way to finish grinding
Target industry: Machine Parts
-
2-saddle turning center LU7000EX
Maximum through-hole diameter ø560 mm, maximum turning diameter ø900 mm. A high-performance 2-saddle lathe for powerful, heavy-duty cutting plus highly efficient production and process-intensive machining, including simultaneous machining on upper and lower turrets.
Target industry: Machine Parts
-
Intelligent multitasking machine MULTUS B250Ⅱ
- Catalogue
The compact MULTUS B250 with an 8-inch chuck is the latest addition to the MULTUS B Series. High machining capacity and a wide machining area all in a compact shape. The high functionality, user-friendly MULTUS B250 achieves high value-added production of a wide range of parts
Target industry: Automotive Parts
-
Intelligent multitasking machine MULTUS U5000
- Catalogue
■ Handles powerful cutting of medium and large parts, and difficult-to-cut materials ■ From the best-selling multitasking machine series that keeps evolving with more precision and higher accuracy
Target industry: Automotive Parts
-
5-axis vertical machining center MU-S600V
- Catalogue
Changing factories with flexible system arrangements by “connecting 2 machines” A machine with built-in robotics The future of smart production line systems A smart machine that connects “monozukuri”
Target industry: Automotive/Transport Machinery
-
Vertical Turning Lathe V920EX
- Catalogue
With a smaller footprint, the V920EX has a larger work envelop, higher performance, and handles more workpiece applications. The innovative productivity of large-diameter thin and add-shaped workpieces makes it ideal for global market applications requiring construction, aerospace and industrial machinery.
Target industry: Automotive Parts Machine Parts Automotive/Transport Machinery
-
CNC CYLINDRICAL GRINDERS GPW/GAW series
- Catalogue
Target industry: Automotive Parts Machine Parts Automotive/Transport Machinery
-
High Speed Circular Saw Machine for Pipe/Hollow “CSHP-75A/100A/150A”
- Catalogue
- Distributor required
- Partnership required
『CSHP-75A/100A/150A』 is a high-speed circular saw machine for the hollow section, which can shorten the cycle time for cutting the hollow section with the latest technology optimized for the high-precision cutting. By combining with an optional automatic loader, a deburring device, etc., to be incorporated into a product line. [Features] ■The single vise mechanism achieves faster moving speed ■High-rigid frame ■The circular saw slides obliquely ■Ecological Clean-mist method cooling system ■Reduction of oil adhesion results in easier maintenance and easier workpiece handling in following process ■AC servomotor control and ball screw for precise feeding and positioning. ※ Please kindly refer to the catalog or feel free to contact us for more details.
Target industry: Iron and steel industry/Metal material
-
Drilling Machine for Shaped Steel “3BA-700IV”
- Catalogue
- Distributor required
- Partnership required
“3BA-700IV” is an automatic drilling machine with 3-axis for shaped steel Just enter the drill data, no need to adjust each dog for measuring the stroke. By detecting and correcting the inclination on the web and error on the flange, no extra correction at the assembly site is required. [Features] ■Three selectable origin point of Left, Right and Center enables quick symmetric machining ■Interactive CNC input for novice to expert ■Laser pointing for the symmetric machining with material locked. ※ Please kindly refer to the catalog or feel free to contact us for more details. (The previous model,“3BA-700C”catalog is available.)
Target industry: Iron and steel industry/Metal material
-
Multi-Purpose Hydraulic Press Machine “Unit Worker Series UWD-45IIS”
- Catalogue
- Distributor required
- Partnership required
“Unit Worker Series UWD-45IIS” is truly multi-purpose, which executes cutting, punching and notching with high precision and high speed for angle bar, channel steel, C-shaped steel and flat bar. A variety of machining with TAKEDA's Unit Die. [Unit Worker Series] 1.[UWD-45IIS], compact body enables a smooth layout at the factory and the pressure tonnage is 450kN as a standard pressure force. 2.[UWD-70IIS], machining stainless steel with the pressure tonnage of 700kN. [Features] ■Multi-Function ■Precise machining ■Safety and easy Operation ■Flexibility ※ Please kindly refer to the catalog or feel free to contact us for more details.
Target industry: Iron and steel industry/Metal material
-
Circular Saw Machine with Carbide Tipped Saw and HSS Saw “CHL-2515AII”
- Catalogue
- Distributor required
- Partnership required
“CHL-2515AII” is a circular saw machine. The cutting section adopts a lateral slide(from lower side face)&down cut mechanism, which can reduce influences of chips in cutting a hollow section. We have upgraded the structure of the mission gear and the driving system of the circular saw, which contributes to the reduction of the backlash and the improvement of the machining speed. This machine is capable of machining the hollow section(Thickness 12mm) with high precision. [Features] ■Both Carbide Tipped Saw and HSS Saw compatible ■Machining a wide range of steels ■Semi-dry cutting system significantly reduces wetting of workpiece ■High-speed and High-precision machining ■Simple and easy operation ※ Please kindly refer to the catalog or feel free to contact us for more details.
Target industry: Iron and steel industry/Metal material
-
3 Axes Drilling and Circular Saw Cutting Combination Machine “CBF-3015II”
- Catalogue
- Distributor required
- Partnership required
"CBF-3015II" is a 3-axis drilling machine and circular saw cutting combination machine compatible with carbide tipped and HSS saw, cutting speed becomes twice faster. A new type of mission is adopted to ensure smooth machining. Automation sizing, Automatic gripper retraction and larger display monitor contribute reducing total machining time. [Features] ■High speed and high precision circular saw machining ■Both Carbide tipped saw and HSS saw compatible. ■Machining a wide range of shaped-steel materials ■The clean-mist semi-dry cutting system reduces wetting of workpiece ■Prolonged service life of circular saw blade ※ Please kindly refer to the catalog or feel free to contact us for more details.
Target industry: Iron and steel industry/Metal material
-
Plate Drilling Machine(Standard Size) “ABP-1015G”
- Catalogue
- Distributor required
- Partnership required
“ABP-1015G” is a drilling machine which is suitable for the wide plate used for the parts of bridge and steel construction. We've increased the drilling torque so that the large diameter hole is drilled smoothly. Windows OS and 12.1 inch screen panel facilitate visibility and operability We have three products in accordance with the size of workpiece. ABP-1015G for 1000x1500mm workpiece, ABP-1530G for 1500x3000mm workpiece and ABP-1540G for 1500x4000mm workpiece. [Features] ■12.1 inch display on the control panel enhances operability ■Featured as standard ATC(Automatic Tool Changer)and automation tool length measurement system. ■From drilling to tapping by just one coordinate in the program ■Work Height Measurement Device(Optional Accessory) ■Equipped USB Port as External Interface ※ Please kindly refer to the catalog or feel free to contact us for more details.
Target industry: Iron and steel industry/Metal material
-
Silicon Nitride Guide Pin for Welding
- Catalogue
We provide you silicon nitride guide pin which has "3 excellent performances" for resistance welding by our unique technology. 1,Resistance to fracture 2,Wear resistance 3,Resistance to be stained metals If you have any questions , Please push " Inquiry ".
Target industry: Automotive/Transport Machinery Machine Parts Precision Equipment
-
Brother Multi-Tasking Machine SPEEDIO M140X2
- Catalogue
Brother Multi-Tasking Machine SPEEDIO M140X2 【Evolving Process Integration Machine】 The structure has been reviewed to allow more flexibility for jig design, leading to the expansion of target machining applications and the improvement of machining capabilities. While successfully realizing the concept of ""enabling one machine to perform both turning and milling,"" the new multi-tasking machine of the SPEEDIO series is now available to enable more advanced complex machining.
Target industry: Industrial Machinery/Devices
Brother Commercial Thailand, LTD. Machine Tools Technical Center
-
Hose Coupling Connector
- Catalogue
The Apollo coupling have been designed to provide quick set up and removal of cutting and welding equipment. A simple safety lock assures secure connection during use. Also the precisely machined single push system easily connects matching couplings with a click. The automatic gas plug gives you easy control when you need it and shuts off automatically when plug is removed. KOIKE Apollo couplings fulfill the international standard ISO 7289 and could be used worldwide.
Target industry: Iron and steel industry/Metal material Construction/Mining Machinery Agricultural Machines
-
SUB ARC WELDING MACHINE
- Catalogue
1) High efficiency provides: ・Low weld cost ・Shorten lead time ・Easy operation for less labor cost 2) Repeatible and consistent quality provides: ・Reduce rework possibility ・Shorten lead time 3) Process traits provides: ・No arc light, no dust ・High melt rate, no splash, less grinding and less waste
Target industry: Iron and steel industry/Metal material Construction Other Manufacturing
-
CNC Oxy-fuel & Plasma Cutting Machine
- Catalogue
The body has a gantry structure and dual side drive systems. Work proceeds smoothly at all times since the body is well balanced and very responsive. A rack and pinion backlash free drive is used for both the cross (X-axis) and longitudinal (Y-axis) directions, which achieves accurate and repeatable motion. Highly accurate, smooth operation is assured thanks to precision machined steel rails and a stable longitudinal drive mechanism. Up to five additional oxy-fuel tool carriages can be attached to a steel band which is not susceptible to slag deposits. The specialized rapid-action coupling allows for efficient manual positioning of the tool carriages and multi-torch cutting.
Target industry: Iron and steel industry/Metal material Construction/Mining Machinery Other Manufacturing
-
4kw CO2 Laser Cutting Machine
- Catalogue
Durability and advanced technology have been built into the LASERTEX ensuring dependable ease of operation. The LASERTEX is the answer for improving existing production processes and opening new opportunities to expand your business. The LASERTEX-series cutting machine is the ultimate solution for the larger capacity and higher accuracy demands of today's industry. The LASERTEX is designed to address the increasing demand for reducing the cost of operating expenses by utilizing common-line cutting and unmanned operation. Costs can be reduced significantly by operating the system unattended during night shift hours. The LASERTEX is capable of producing two shifts of operation for one shift's labor cost. A dross-free result eliminates the need for secondary cleaning operations. Common-line cutting reduces remnant scrap costs from 1% to 5%. With unmanned operation, cost of operating the machine is lower due to decreased cost of power and no operator interference.
Target industry: Iron and steel industry/Metal material Construction/Mining Machinery Other Manufacturing
-
Small-size Welding Positioner
- Catalogue
● Selecting the right positioner model is easy! With conventional positioners, you needed to select a model based on the appropriate rotation speed for your work. LD-R model positioners, however, provide stable control of wide range of rotation speeds, from slow to high-speed, so you simply need to select a model according to the load weight. They respond flexibly to changes in workpiece shapes, which mean changes in welding speed. The new LDR-A controller employs a 3 step(HI/MID/LOW) speed adjustment switch, and provides extensive fine adjustments for each speed range. ● High TIG welding noise tolerance (new design featuring outstanding noise tolerance) A new design that reduces the impact of noise generated during TIG welding ensures stable rotation. You do not need to select a special model for TIG welding. LD-R model positioners can be used with TIG, MIG, and MAG welding machines. They are sure to improve both work efficiency and welding quality. ● Execellent durability Anti dust and spatter design allows stable operations even in harsh welding environments. ● Safety design Design concepts adopted from ARONSON, the world largest positioner brand, ensure durability and safety. A foot switch(included) further supports safe operation. ● Wide assortment of optional accessories A wide assortment of optional positioner accessories are available, to help you easily automate your welding work (torch stand, automatic welding controller, work chuck, weaving unit, torch holder, etc.)
Target industry: Iron and steel industry/Metal material Machine Parts Other Manufacturing
-
Multi Purpose Automatic Welding Carriage
- Catalogue
The Koike WEL-HANDY MULTI welding carriage are all light, compact and are equipped a 4WD. The magnetic force traction with low center of gravity which achieves the highest pulling power and stability in the market. The WEL-HANDY MULTI can be used for flat welding. In addition, vertical welding is possible with optional Strong magnet. ・Easy Set Up - No guide rails means fast and easy setup. In most cases existing welding equipment can be used. ・Automatic Height Control - The Wel-Handy Multi runs directly on the work piece. On a fillet weld weld this keeps the contact tube to work distance set without the need for a torch height control. ・Automatic Shut Down at the end of the weld - Limit switches at each end of the carriage allow the operator to set up a pre-determined stop point using a magnetic block. Once the limit is tripped, the machine travel and welding stops.
Target industry: Iron and steel industry/Metal material Other Manufacturing Other
-
Portable CNC Cuutting Machine
- Catalogue
The KOIKE PNC-12 EXTREME is an entry level CNC cutting solution that is compact, affordable, versatile and simple to operate. It is suitable for both oxy-fuel and plasma cutting of all metals. Precision Linear guide ways & sturdy cross arm for stability and accuracy. Available in 3 models with effective cutting widths of 1.0 / 1.25 / 1.5 m. Full color 7” LCD display screen with 47 standard shapes library Program input by Manual data input or USB Thumb drive up to 16 GB memory. Compatible with most air plasma cutting systems, torch diameter of 35mm. Comes with Koike's 100 type cutting nozzles and CAD/CAM software. Optional plasma Initial height sensor, Arc voltage control & Torch break away.
Target industry: Iron and steel industry/Metal material Agricultural Machines Construction/Mining Machinery
-
Portable Pipe Hole Cutting Machine
- Catalogue
The KHC-600D is a portable automatic oxy-fuel pipe hole cutting machine. The main application is the accurate cutting of holes with or without bevel in pipes, high-pressure storage tanks and heat exchangers. An eccentric mechanism guarantees an exact adjustment of the stroke (vertical travel of the torch). The rotational joint at the gas supply prevents entangling hoses and a repositioning of the machine to its home position.
Target industry: Iron and steel industry/Metal material Construction/Mining Machinery Energy
-
Portable Straight-Line Cutting Machine
- Catalogue
The IK 12 max 3 is the premium product of our assortment! This motorized hand cutting machine allows different types of oxy-fuel/plasma cutting and automated welding. There are three major parts to the system. The advanced motorized carriage, a cutting torch unit, the plate track and accesories. All serving as independent units, the customer can choose the system for his specific requirements. The Speed Control utilizes an exclusive KOIKE Double Cone Stepless Speed System, which functions with a condensor motor rotating at regular speed to prevent heat and voltage problems. In addition, the condensor motor rotates at a constant low speed ( 1,500 rpm), extending the service life of bearings.
Target industry: Iron and steel industry/Metal material Construction/Mining Machinery Other Manufacturing
-
Multi-Purpose Semi-Auto Portable Cutting Machine
- Catalogue
The HANDY AUTO PLUS is a portable hand held gas cutting machine with an integrated drive system, ignition device and Start-Stop-function for pre-heating flame. It ensures highest cut quality in vertical, circular and shape cutting as well as beveling. Besides cutting of flat surfaces it is also possible to perform curved contours on vertical surfaces like H-beams, pipes and bended plates. Thanks to the low weight of 3,5 kg HANDY AUTO PLUS can be used as simple as an ordinary hand cutting torch.
Target industry: Iron and steel industry/Metal material Agricultural Machines Energy
-
All-electric injection molding machine EC100SX
- Catalogue
The EC-SX series is a high-performance all-electric injection molding machine that achieves precise and steady molding and high productivity, thanks to its newly developed clamping mechanism and great improvements in the basic performance of the machine. This series meets various customers’ needs with our “five new technologies" and our expertise in molding accumulated over many years.
Target industry: Automotive/Transport Machinery Consumer Electrical Appliances Semiconductors/LCD/FPD
-
All-electric injection molding machine EC30S
- Catalogue
The EC-S series is a global standard model with improved basic performance, developed with the concepts of precise and steady molding and high productivity in mind.
Target industry: Automotive/Transport Machinery Consumer Electrical Appliances Semiconductors/LCD/FPD
-
Vertical boring machine TUE series
- Catalogue
Latest series of our best-selling TUE machine. The TUE series is a high quality vertical boring machine with great cost-performance, which can be used for any type of processing. In this series, we have a new multifunctional model, Type S, which features drilling for processing area expansion and TAP processing.
Target industry: Automotive/Transport Machinery Semiconductors/LCD/FPD Electrical/Electronic Parts
-
Double column type machining center MPJ series
- Catalogue
The MPJ series is a double-column machining center offering better versatility to respond to global requirements.
Target industry: Automotive/Transport Machinery Semiconductors/LCD/FPD Electrical/Electronic Parts
-
Table style horizontal boring machine BTH-130.R24
- Catalogue
A sales record of over 8,000 and technology brought together. Our table style horizontal boring machine BTH-130.R24 was developed aiming for the operability of boring machines and the productivity of a machining center. The more you use it, the more you’ll become convinced of the productivity and operability of this cutting-edge machine.
Target industry: Automotive/Transport Machinery Semiconductors/LCD/FPD Electrical/Electronic Parts
-
Table style horizontal boring machine BTD-110H.R16
- Catalogue
Toshiba Machine’s sought-after horizontal boring machines are versatile enough for any job at your factory. Functions that enhance workability guarantee better machining. Our table style horizontal boring machine BTD-110H.R16 is a best seller that’s highly valued by its users. They’re machines with evolving performance and productivity.
Target industry: Automotive/Transport Machinery Semiconductors/LCD/FPD Electrical/Electronic Parts
-
High Precision Aspheric and Free-form Surface Grinder ULC/ULG Series
- Catalogue
The ULC/ULG series has been developed to produce efficient and high-precision turning and grinding of free-form surface (f-θ lenses), aspheric lenses and their molds. In addition, with the best machine structure and options for every use, this series offers great cost-effectiveness.
Target industry: Automotive/Transport Machinery Semiconductors/LCD/FPD Electrical/Electronic Parts
-
High Precision Vertical Machine UVM-450C(V2)
- Catalogue
UVM-450C(V2) is a high cost-performance vertical machine developed with the concept of high speed and high quality machining. With our proprietary high precision aerostatic bearing spindle installed, this exceptionally precise model is ideal for precision mold processing. Compared to conventional machines, this model ensures lower running costs and offers significant improvement in machining quality. 1. 60,000 min-1 spindle installed ⇒ Machining time reduction 2. Non-contact air bearing ensures semi-permanent spindle life If the spindle should be damaged, the cost of repair is much less than for other manufacturers’ spindles ⇒ Maintenance cost reduction 3. High rotation accuracy extends tool life dramatically In addition, no time limitation on continuous rotation at high speed allows machining with just small-diameter tools 4. Significant improvement in finished surface quality ⇒ Reduces amount of polishing required 5. Significant improvement in machining accuracy ⇒ Achieves high value-added machining 6. With a number of optional accessories such as a rotating table, various processes can be carried out with just a single machine ⇒ Various functions are possible with this machine
Target industry: Automotive/Transport Machinery Semiconductors/LCD/FPD Electrical/Electronic Parts
-
Heat Treatment: Heat treatment tray made of C/C composite
- Catalogue
Heat treatment trays (baskets, grids and so on) made of C/C composites offer excellent value in terms of post-installation operating costs and longevity, allowing better overall cost performance than ordinary metal trays. Isotropic graphite products also have high heat resistance, making them ideal for heaters, structures inside furnaces, jigs for product processing, decks and other parts in heat treatment furnaces operating under high temperature. *Please contact us or download our catalogue for more details.
Target industry: Automotive Parts Machine Parts Semiconductors/LCD/FPD
-
Combustor “Metal fiber burner”
- Catalogue
The “Metal fiber burner” is a new type of burner using special heat resistant metallic fiber. The material is durable metal, but with its characteristic of fiber, this burner can be customized into any shape, such as cylindrical, conical or hemispherical, to accommodate almost any items. Heating-up and cooling-down are both speedy, ensuring shorter operation hours and a safer environment. 【Features】 ■High surface temperature: glowing starts approx. at 900 °C (In normal use at 850 °C) ■Can be heated up in a furnace: can be used inside furnaces in stable combustion conditions at approx. 800 °C ■High thermal efficiency: conversion rate to radiated heat is over 30% ■Quick response: Can respond in seconds ■High level of safety: speedy cool-down makes it safe for use in paper or fabric processing ※For details, please contact us or download the catalogue.
Target industry: Automotive/Transport Machinery Industrial Machinery/Devices Nonferrous metals
All From 92 1 - 80 items are displayed