- English
- 日本語
Industrial machine
Industrial machine |
|
|---|
- Automotive/Transport Machinery
- Consumer Electrical Appliances
- Semiconductors/LCD/FPD
- Measurement/Analytical Instruments
- Industrial Machinery/Devices
- Optical Equipment/Parts
- Iron and steel industry/Metal material
- Resin/Plastic/Rubber Products
- Construction/Mining Machinery
- Paper Making/Paper Products
- Printing/Photoengraving/Binding
- Other Manufacturing
- Construction
- Mining
- Electricity/Gas/Water
- Other
-
Filter Press Dehydrator "U-TEC"
- Catalogue
- Distributor required
- Partnership required
U-TEC is a dehydrator to separate solid and liquid by filtration and squeezing. Dehydrated cake washing process is equipped as standard. U-TEC is cloth travel type automatic filter press with single filter cloth. All chambers open (close) at the same time during cake discharge process to save operation time.
Target industry: Industrial Machinery/Devices Semiconductors/LCD/FPD Iron and steel industry/Metal material
-
Filter Press Dehydrator "AUTOPAC"
- Catalogue
- Distributor required
- Partnership required
AUTOPAC is a dehydrator to separate solid and liquid by filtration and squeezing. Dehydrated cake can be washed by AUTOPAC-PRO model. AUTOPAC is compact, ready-made, all-in-one type with automatic operation.
Target industry: Industrial Machinery/Devices Semiconductors/LCD/FPD Iron and steel industry/Metal material
-
Electro Chlorination System
- Catalogue
- Distributor required
- Partnership required
Electro chlorination system can prevent bio-fouling in power plants, refineries, LNG plants, desalination plants, offshore platforms etc. by electrical generation of sodium hypochlorite from seawater or brine. The electro chlorination system can be also used to improve water in aquariums and to disinfect drinking water.
Target industry: Electricity/Gas/Water
-
Filter Press Dehydrator "TFAP"
- Catalogue
- Distributor required
- Partnership required
TFAP is a dehydrator to separate solid and liquid by filtration and squeezing. Dehydrated cake washing process is equipped as standard. TFAP is build-to-order, various capacity & specification can be applicable with automatic operation.
Target industry: Industrial Machinery/Devices Semiconductors/LCD/FPD Iron and steel industry/Metal material
-
Filter Press Dehydrator "TFTP"
- Catalogue
- Distributor required
- Partnership required
TFTP type FILTER PRESS equips Double Hydraulic Cylinder and Shifting Block with automatic squeezing operation. Size & width of filter plates are selectable as per customer's requirements. Cake discharge can be carried out easily with 1 operator.
Target industry: Industrial Machinery/Devices Semiconductors/LCD/FPD Iron and steel industry/Metal material
-
L-38-150 Large Spindle Drill Rig "Megalo"
- Catalogue
L-38-150 "Megalo" drill can handle large diameter Rod and Casing through its spindle I.D. 145mm, having enjoyed high prestige in Japanese market over long years with its versatility from high speed coring to tricone bit work. Optional L-Frame model is for larger diameter up to 900mm in water well drilling, etc.
Target industry: Construction/Mining Machinery
-
L-38-98 High Speed Diamond Core Drill Rig
- Catalogue
L-38 High Speed Core Drill Rig is renound model in the world for mineral exploration / soil investigation up to 565m throughout the world, equipped with 98mm Spindle Head and 8-step transmission for proper working speed.
Target industry: Construction/Mining Machinery
-
NL-26 Portable/Compact Drill Rig
- Catalogue
NL-26 is a portable and compact drill rig equipped with Hydraulic Chuck with 6-step gearing system for precise drilling speed adjustment. Max. Dissassembly weight is 60kg, No Oil leakage, and Portability for mountainous job sites are primary features.
Target industry: Construction/Mining Machinery
-
NL-55 Drill Rig [1]Water well drilling [2]Geological Survey MADE IN JAPAN
- Catalogue
- Partnership required
Designed for greater depth with larger diameter for civil engineering works, mineral exploration up to 1,500m, water well, hot spring well, geothermal exploration with its spindle I.D. of 145mm diameter. Having gained a high reputation, especially around Asian market, NL-55 has been introduced and worked at major mining & drilling companies in several types of drilling operations.
Target industry: Construction/Mining Machinery Construction Mining
-
NL-500 Hydraulic Exploration 500m Core Drill, MADE IN JAPAN
- Partnership required
NL-500 Drill was developed in pursuit of Safety Control, Labor Saving and Cost Efficiency, having drilling capacity up to 550m for mineral exploration, soil investigation, etc. Gear Drive Head is strong and powerful unlike chain drive.
Target industry: Construction/Mining Machinery Mining Other
-
NL-700-V2 Hydraulic Exploration 700m Core Drill, MADE IN JAPAN
- Partnership required
NL-700-V2 was developed in pursuit of Safety Control, Labor Saving,, Cost Efficiency, and High Productivity. Sliding Head erases downtime in dealing with larger casing without opening the head. Capable of wireline N size (69.9mm) drilling up to 700m of deep hole drilling (actual record : 940m in 60° angle hole drilling). Gear Drive Head is strong and powerful unlike chain drive.
Target industry: Construction/Mining Machinery Construction Other Manufacturing
-
Nut/Bolt welding defect detention system navi series
- Catalogue
Our nut/bolt welding defect detection system, the navi, checks whether workpieces are set correctly just before welding begins with high accuracy. As the detection occurs immediately before welding begins, welding defects are prevented, reducing defect product circulation. The system detects workpiece defects such as wrong sizes or directions, misalignment, loose electrodes, thread length mismatching, different tip shapes, etc. [System Lineup] • Nut welding defect detection system - For manual operations: Handy-navi - For robot and automated operations: Robo-navi-Single - For robot and automated operations: Robo-navi-Double • Bolt welding defect detection system - For manual operations (manual setting): Handy-navi-Bolt - For manual operations (feeder setting): Handy-Robo-navi-Bolt - For robot and automated operations (feeder setting): Robo-navi-Bolt * For more details, please download our PDF documents or contact us.
Target industry: Automotive/Transport Machinery Consumer Electrical Appliances Measurement/Analytical Instruments
-
Semi-automatic Duplex Turret Slitter Rewinder “SDT-926-1300”
- Catalogue
This Slitter Rewinder is designed to treat various plastic films which require fine finished with easy handling. Thanks to duplex turret system, you will obtain high production rates. 【Main specifications】 Unwinding dia. : φ1000mm Rewinding dia. : φ600mm Mechanical speed : 600m/min. Slitting width : Min.90mm (50mm as an option) Trimming winder : 2units Internal type
Target industry: Resin/Plastic/Rubber Products Printing/Photoengraving/Binding Paper Making/Paper Products
-
Single Side Inspection Rewinder “Model:RSF-308VI-1300”
- Catalogue
This rewinder automatically performs product inspection of stock, which has been printed on one side, by the defect detection equipment. When a defect is detected, the machine reduces its speed until it stops rewinding, then the film is automatically rewound back and the defect area stops over an inspection plate for visual examination. The operator confirms the defect by visual examination, and carries out the operation to remove the defective part.
Target industry: Paper Making/Paper Products Resin/Plastic/Rubber Products Printing/Photoengraving/Binding
-
Duplex Center Drive Slitter Rewinder “Model:HDF-406-1300”
- Catalogue
This slitter rewinder are designed to treat various plastic films which require fine finished with easy handling. It includes the product receiver to simplify the conveyance of the wound product. 【Main specifications】 Unwinding dia. : φ800mm Rewinding dia. : φ600mm Mechanical speed : 400m/min. Slitting width : Min.80mm (50mm as an option) Trimming winder : By blower
Target industry: Optical Equipment/Parts Paper Making/Paper Products Resin/Plastic/Rubber Products
-
Duplex Center Drive Slitter Rewinder “Model:HDF-306V-1300”
- Catalogue
This slitter rewinder are designed to treat various plastic films which require fine finished with easy handling. It includes the product receiver to simplify the conveyance of the wound product. 【Main specifications】 Unwinding dia. : φ1000mm Rewinding dia. : φ600mm Mechanical speed : 400m/min. Slitting width : Min.90mm (50mm as an option) Trimming winder : Internal type (2units)
Target industry: Optical Equipment/Parts Paper Making/Paper Products Resin/Plastic/Rubber Products
-
HAGIHARA INDUSTRIES INC. “Product Catalogue”
- Catalogue
Product Catalogue of HAGIHARA INDUSTRIES INC. the leading manufacturer of Slitter Rewinder in JAPAN.
Target industry: Optical Equipment/Parts Paper Making/Paper Products Resin/Plastic/Rubber Products
-
Trimming Winder “Model : TW-11”
- Catalogue
This Trimming winder winds the trimmed edge from the slitter machine. 【Main specifications】 Web width : 10-30mm Winding dia. : φ400mm Traverse width : 400mm Mechanical speed : 400m/min.
Target industry: Optical Equipment/Parts Paper Making/Paper Products Resin/Plastic/Rubber Products
-
Corrective Rewinder “Model : RSF-105V-600”
- Catalogue
This rewinder performs rewinding film rolls for correcting edge, correcting printed order and so on. The operator confirms the defect by visual examination, and carries out the operation to remove the defective part. 【Main specifications】 Unwinding dia. : φ500mm Rewinding dia. : φ500mm Mechanical speed : 300m/min.
Target industry: Optical Equipment/Parts Printing/Photoengraving/Binding Resin/Plastic/Rubber Products
-
Single Side Inspection Rewinder “Model:RSF-108VI-1300”
- Catalogue
This rewinder automatically performs product inspection of stock, which has been printed on one side, by the defect detection equipment. When a defect is detected, the machine reduces its speed until it stops rewinding, then the film is automatically rewound back and the defect area stops over an inspection plate for visual examination. The operator confirms the defect by visual examination, and carries out the operation to remove the defective part.
Target industry: Optical Equipment/Parts Resin/Plastic/Rubber Products Printing/Photoengraving/Binding
-
Duplex Center Drive Slitter Rewinder “Model:HDF-105-1300”
- Catalogue
This slitter rewinder are designed to treat various plastic films which require fine finished with easy handling. 【Main specifications】 Unwinding dia. : φ800mm Rewinding dia. : φ500mm Mechanical speed : 300m/min. Slitting width : Min.80mm (50mm as an option) Trimming：By blower
Target industry: Optical Equipment/Parts Resin/Plastic/Rubber Products Paper Making/Paper Products
-
Duplex Center Drive Slitter Rewinder “Model:HDF-306Y-1300”
- Catalogue
This slitter rewinder are designed to treat various plastic films which require fine finished with easy handling. It includes the product receiver to simplify the conveyance of the wound product. 【Main specifications】 Unwinding dia. : φ1000mm Rewinding dia. : φ600mm Mechanical speed : 400m/min. Slitting width : Min.90mm (50mm as an option) Trimming winder : Internal type
Target industry: Optical Equipment/Parts Resin/Plastic/Rubber Products Paper Making/Paper Products
-
Sheet Piler for hydraulic hammer HP series
- Catalogue
- Distributor required
NPK’s sheet piler HP series, used with hydraulic hammers, is suitable for lifting/driving sheet piles in urban areas or narrow, unstable spaces. It’s also cost effective as no crane or power generators are required. The chuck bends 90° (SX model only) and can pick up sheet piles without standing them upright first, thus reducing operation time. We have the following 4 models with recommended shovel weights of: HP-2SX: 6 – 9 tons HP-4SX: 10 – 16 tons HP-7SX: 17 – 21 tons HP-10L: 22 – 30 tons (Special order)
Target industry: Construction Construction/Mining Machinery
-
New compact hydraulic hammer PH series
- Catalogue
- Distributor required
NPK, a pioneer in hydraulic hammers, has developed compact hydraulic hammers for the next generation. While maintaining a high crushing force, which is NPK’s watchword, innovative but simple design featuring a carburized coating integrated cylinder ensures light weight and great durability. Offering easy maintenance and great usability for operators or repair work, it’s the industry’s only gas powered model. Shortened operation time is guaranteed thanks to its world-class crushing force. We have the following 4 models with recommended shovel weight of: PH-1: 2.0 - 3.5 tons PH-2: 3.0 - 5.5 tons PH-3: 4.0 - 8.0 tons PH-4: 6.0 - 9.0 tons
Target industry: Construction Construction/Mining Machinery Mining
-
Hydraulic Hammer for medium/heavy duty GHS series
- Catalogue
- Distributor required
NPK’s hydraulic hammer GH series has gained an outstanding reputation and continued customer support for its advanced technology. It’s the industry’s only “Gas powered method” to ensure powerful operation. Rubber cushioning comes standard for better shock- and soundproofing and it utilizes a very durable cylinder. Can be attached to 10 – 20 ton class hydraulic hammers. We offer a wide variety of products to meet any and all customer requirements.
Target industry: Construction Construction/Mining Machinery Mining
-
"TOP" Series Horizontal Drills
- Catalogue
Conventional horizontal drilling methods are apt to encounter the difficulties such as collapse, water gush and hole deflection, etc. Duplex pipe shield drilling method with "TOP" series horizontal drilling machine ensures trouble-free and effective operation through troublesome ground formations such as boulder layer, fault or fractured zones.
Target industry: Construction/Mining Machinery Other Construction
-
"TMW" Multi-Auger Type Diaphragm Walling Machine
Multi-auger type diaphragm walling machine is the equipment to form a rectangular soil-mixing column wall by mixing and kneading the soil and cement slurry as excavating with multi-auger bits. Side wall cutter can remove uncut section remained by auger bit excavation and construct a continuous rectangular wall with flat surface.
Target industry: Construction/Mining Machinery Construction Other
-
DTH Hammer
- Catalogue
・Under-reaming bit (SUPER JAWS): This method is DTH hammer drilling system by protecting bored hole by outer casings when drilling the ground formation easy to collapse. After drilling, well casings and screens can be safely and securely installed through the inside of outer casings which are left inside bored hole. ・Reverse circulation hammer (MACH drill): Drilling is carried out by DTH method and removal of cuttings are carried out by reverse circulation system effectively. Especially, this method is suitable for drilling works on the sea or on the river for foundation piling for bridge and jetty, etc.
Target industry: Construction/Mining Machinery Construction Other
-
"TSL" Geothermal Exploration and Production Drill
- Catalogue
"TSL" drill is suitable for the recent requirement of hot spring exploration and deep underground energy exploration, and has a structure with the combination of wireline coring system and rotary table non-core drilling system with kelley bar.
Target industry: Construction/Mining Machinery Construction Other
-
"TOP" Series Truck mounted Water Well Drill Rigs
- Catalogue
In some dry areas such as the countries in Africa, Middle East, Asia and South America, the supply of potable and irrigation water still mainly depends on surface water, which is apt to dry up during dry season. Meanwhile, ground water can stably supply the water through the year disregarding the season. As the demand of groundwater development in the above areas quite enhances, the operation of our water well drill rig with high mobility is very active. Our truck mounted drill rigs with supply records more than 200 units to those countries have been evaluated with a reputation of its better operability and high durability.
Target industry: Construction/Mining Machinery Construction Other
-
SONIC Drill, SUPERPROBE
- Catalogue
SONIC drill has an innovative drilling technology providing the rotation and vibration with drill bit. Compared with conventional rotary method, DTH hammer method or rotary percussion method, remarkable high speed drilling is realized.
Target industry: Construction/Mining Machinery Construction Other
-
"EP" & "SP" Series Environmental Investigation Drills
- Catalogue
"EP" & "SP" series drills have innovative drilling system giving the roation and vibration to drill bit simultaneously and offer remarkable drilling efficiency compared with hydraulic percussion drill in consideration of neighboring environment thanks to its low noise creation. These drills are capable of high speed sampling to collect undisturbed samples without the use of circulation fluid, furthermore, can conduct the sampling and drilling of monitoring well at same time by means of dual tube method.
Target industry: Construction/Mining Machinery Construction Other
-
Cast-in-Place Piling Machines
- Catalogue
To construct surface structures, the foundation structure by installing the piles into the ground is provided to support surface structures. Cast-in-place pile construction is the method to complete the pile by placing the concrete after installing the reinforced cage to be arranged on site into bored hole. Cast-in-place pile constrution has various methods based on drilling depth, pile diameter, pile length, etc.
Target industry: Construction/Mining Machinery Construction Other
-
Rotary Multi-Horizontal Cutter Diaphragm Wall Trencher
- Catalogue
Diaphragm wall trenching is a technology to construct a continuous underground wall for the purpose of the foundation and retaining wall before construction of large scale underground structures. The performacne and capability of rotary multi-horizontal cutter diaphragm wall trencher is expected for future large scale projects such as the construction of underground railway and highway. In developing countries such as China, the demand of this diaphragm wall trencher to be replaced with bucket type trencher which is used only for shallow trenching is enhanced.
Target industry: Construction/Mining Machinery Other Construction